search for: datalinks

...<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 10.9.59.56 netmask ffffffe0 broadcast 10.9.59.63 ether 2:8:20:7f:a9:16 lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 root at pine:~# snoop snoop: no datalinks found root at pine:~# snoop -d vnic0 -o /dev/null Using device vnic0 (promiscuous mode) 1 ^C root at pine:~# -- This message posted from opensolaris.org

Crossbow team, The following is of interest to the Crossbow project. Since a large chunk of these changes also exist in the Crossbow gate, the delivery of this wad will result in fewer lines of changes for Crossbow''s delivery. If someone on Crossbow could participate in this review, that would be a bonus (Eric Cheng made original changes in the Crossbow gate at some point last year).

...or more bge interfaces. Create a global0 vnic on top of aggr0. Plumb global0 and configure it on the network. Ping the address for global0. Expected Result No duplicate packets generated by the host. Actual Result Duplicate packets sent by the host. Workaround Do not use aggregate datalinks on bge, or choose different hardware (e.g. e1000). -- Jason Dixon OmniTI Computer Consulting, Inc. jdixon at omniti.com 443.325.1357 x.241

(Bcc''ed to networking discuss). Hi All, Have enclosed man page draft for dlstat(1M) herewith. This is part of the effort to gain better visibility into network traffic in light of crossbow features like virtual NICs, interrupt vs. polling modes etc. This in turn would greatly assist network performance analysis. It is also aimed at segregating link/flow configuration from

Hi, My first post here, so help me right if I'm not following protocol. My problem basically boils down to this. I need this program to download the data from me and my wife's pedometers for health insurance purposes. This program is supposed to work on Win 2000 through Vista, but should run on 7 as well. I'm running latest Wine ( 1.3.xx from PPA) on Kubuntu 11.10. It installs

...r but there is maybe a failure in the sslhandshake. Additional information you can find in the logs or in the dump below. Also I have my ldap config from dovecot in the links below. I have already created an bug reporting in the system of openldap but the answer was to get support from her. All datalinks: https://gwarband.de/openldap/dovecot.log https://gwarband.de/openldap/dovecot-ldap.conf https://gwarband.de/openldap/openldap.log https://gwarband.de/openldap/trace.dump The bugreportinglink from openldap: http://www.openldap.org/its/index.cgi/Incoming?id=8615 I hope you can help me. Regards. T...

Hello! In the earlier mail I think I was not clear... Actually the following is my requirements: 1) our requirement is to capture all packets originating/destined to a particular machine. This also includes ping packets to same machine/localhost. i.e. at machine A we want to also capture packets originating from say machine A and destined to machine A (these propably do not go to data link

On OpenSolaris 2009.06 I created a flow, half a dozen VNICs, and I set some properties, and everything was working, then I rebooted my system and everything disappeared from show-vnic, show-flow, and show-prop. When I tried to re-create the objects, dladm said they already existed. While I could not see the objects, I could delete them. Example: # dladm show-vnic # dladm create-vnic -l bge0

...Additional information you can find in the logs or in the dump below. >> Also I have my ldap config from dovecot in the links below. >> >> I have already created an bug reporting in the system of openldap but >> the answer was to get support from her. >> >> All datalinks: >> https://gwarband.de/openldap/dovecot.log >> https://gwarband.de/openldap/dovecot-ldap.conf >> https://gwarband.de/openldap/openldap.log >> https://gwarband.de/openldap/trace.dump >> >> The bugreportinglink from openldap: >> http://www.openldap.org/its/...

...ow. >>>> Also I have my ldap config from dovecot in the links below. >>>> >>>> I have already created an bug reporting in the system of openldap >>>> but >>>> the answer was to get support from her. >>>> >>>> All datalinks: >>>> https://gwarband.de/openldap/dovecot.log >>>> https://gwarband.de/openldap/dovecot-ldap.conf >>>> https://gwarband.de/openldap/openldap.log >>>> https://gwarband.de/openldap/trace.dump >>>> >>>> The bugreportinglink from...

...from dovecot in the links below. >>>>>> >>>>>> I have already created an bug reporting in the system of openldap >>>>>> but >>>>>> the answer was to get support from her. >>>>>> >>>>>> All datalinks: >>>>>> https://gwarband.de/openldap/dovecot.log >>>>>> https://gwarband.de/openldap/dovecot-ldap.conf >>>>>> https://gwarband.de/openldap/openldap.log >>>>>> https://gwarband.de/openldap/trace.dump >>>>>> &g...

...the sslhandshake. > Additional information you can find in the logs or in the dump below. > Also I have my ldap config from dovecot in the links below. > > I have already created an bug reporting in the system of openldap but > the answer was to get support from her. > > All datalinks: > https://gwarband.de/openldap/dovecot.log > https://gwarband.de/openldap/dovecot-ldap.conf > https://gwarband.de/openldap/openldap.log > https://gwarband.de/openldap/trace.dump > > The bugreportinglink from openldap: > http://www.openldap.org/its/index.cgi/Incoming?id=8615 &...

I want to bond together both interfaces on my dom0 using IPMP to provide a redundant path. Is this supported? - I''ve done a google and found no specific mention of doing exactly this so I''d like to know if it is possible before I attempt it. Many thanks, Matt. -- This message posted from opensolaris.org

...t;>>>> I have already created an bug reporting in the system of >>>>>>>> openldap >>>>>>>> but >>>>>>>> the answer was to get support from her. >>>>>>>> >>>>>>>> All datalinks: >>>>>>>> https://gwarband.de/openldap/dovecot.log >>>>>>>> https://gwarband.de/openldap/dovecot-ldap.conf >>>>>>>> https://gwarband.de/openldap/openldap.log >>>>>>>> https://gwarband.de/openldap/trace.d...

...you can find in the logs or in the dump below. >>> Also I have my ldap config from dovecot in the links below. >>> >>> I have already created an bug reporting in the system of openldap but >>> the answer was to get support from her. >>> >>> All datalinks: >>> https://gwarband.de/openldap/dovecot.log >>> https://gwarband.de/openldap/dovecot-ldap.conf >>> https://gwarband.de/openldap/openldap.log >>> https://gwarband.de/openldap/trace.dump >>> >>> The bugreportinglink from openldap: >>> h...

I have a problem receving calls via the ISDN line, using the followin components Asterisk 1.0.9 with asterisk@home chan_capi-cm-0.6 AVM Fritz card datalink protocol = point to multimode I can make calls out with no problems so the issue is only incoming calls. When I make the call from an external line to the ISDN line connected to asterisk, I get a busy signal after about 5 seconds. I have

Just cross pairs 1-2 and 4-5 1 <--> 4 2 <--> 5 Never done an E1, but I think it's the same for a T1 4 wire cable. Tim Thompson Commercial Sales Engineer http://www.amatechtel.com (806) 722-2227 -----Original Message----- From: bam [mailto:bam@cqm.co.uk] Sent: Monday, December 29, 2003 9:12 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] E100P pinouts

Background: Thanks to the LARTC howto, this list and Stef Coene''s and devik''s excellent web sites I now have an ethernet bridge (patch bridge-nf.0.0.7) happily prioritising traffic (12Mbit) into 10 queues (9 for IP and 1 for non-IP) using a combination of iptables (fwmark) and htb3 and sfq. Many thanks. At the moment I''m filtering all non-IP traffic by setting the

...>>>>> Also I have my ldap config from dovecot in the links below. >>>>> >>>>> I have already created an bug reporting in the system of openldap but >>>>> the answer was to get support from her. >>>>> >>>>> All datalinks: >>>>> https://gwarband.de/openldap/dovecot.log >>>>> https://gwarband.de/openldap/dovecot-ldap.conf >>>>> https://gwarband.de/openldap/openldap.log >>>>> https://gwarband.de/openldap/trace.dump >>>>> >>>>> Th...

...inks below. >>>>>>> >>>>>>> I have already created an bug reporting in the system of openldap >>>>>>> but >>>>>>> the answer was to get support from her. >>>>>>> >>>>>>> All datalinks: >>>>>>> https://gwarband.de/openldap/dovecot.log >>>>>>> https://gwarband.de/openldap/dovecot-ldap.conf >>>>>>> https://gwarband.de/openldap/openldap.log >>>>>>> https://gwarband.de/openldap/trace.dump >>>...