search for: datalinke

How come snoop doesn''t find the vnic0, by default: root at pine:~# ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnic0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 inet 10.9.59.56 netmask ffffffe0 broadcast 10.9.59.63 ether 2:8:20:7f:a9:16 lo0:

Crossbow team, The following is of interest to the Crossbow project. Since a large chunk of these changes also exist in the Crossbow gate, the delivery of this wad will result in fewer lines of changes for Crossbow''s delivery. If someone on Crossbow could participate in this review, that would be a bonus (Eric Cheng made original changes in the Crossbow gate at some point last year).

I opened a bug report earlier today but it doesn''t seem to have been added to the bugs database. I''m posting here in case one of the Crossbow developers might see it and confirm this behavior. Description Duplicate packets are generated whenever an aggregate is introduced into the network configuration. We''ve ruled out switch ports and physical bge interfaces as

(Bcc''ed to networking discuss). Hi All, Have enclosed man page draft for dlstat(1M) herewith. This is part of the effort to gain better visibility into network traffic in light of crossbow features like virtual NICs, interrupt vs. polling modes etc. This in turn would greatly assist network performance analysis. It is also aimed at segregating link/flow configuration from

Hi, My first post here, so help me right if I'm not following protocol. My problem basically boils down to this. I need this program to download the data from me and my wife's pedometers for health insurance purposes. This program is supposed to work on Win 2000 through Vista, but should run on 7 as well. I'm running latest Wine ( 1.3.xx from PPA) on Kubuntu 11.10. It installs

Hello guys, actually I'm trying to configure dovecot to access openldap for passwordcheck. My openldap is only allow access over "secure ldap". The dovecot can communicate with the openldap server but there is maybe a failure in the sslhandshake. Additional information you can find in the logs or in the dump below. Also I have my ldap config from dovecot in the links below. I

...ating from say machine A and destined to machine A (these propably do not go to data link layer). 2) we want to experiment the behavior by adding delays to those packets, and that is why we want the actual packet and a copy of packet wont serve purpose. 3) we are open to listen at whatever layer (datalinke/network) and so how can we achieve this functionality. _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

On OpenSolaris 2009.06 I created a flow, half a dozen VNICs, and I set some properties, and everything was working, then I rebooted my system and everything disappeared from show-vnic, show-flow, and show-prop. When I tried to re-create the objects, dladm said they already existed. While I could not see the objects, I could delete them. Example: # dladm show-vnic # dladm create-vnic -l bge0

Hello, I have also installed LE certs. But nothing helps, I have double-checking all certs. ldapsearch with -ZZ works see: https://gwarband.de/openldap/ldapsearch.log I have also uploaded the TLSCACertificateFile, maybe I have a failure in the merge of the two fiels: https://gwarband.de/openldap/LetsEncrypt.crt And also I have uploaded my complete openldap configuration:

I've replicate the settings from ldapsearch to dovecot but no success. To the certificate: Yes it's a *.crt file but I have linked the *.pem file to it and dovecot has read access to that file. I have enabled the debugging in dovecot and have uploaded the output: https://gwarband.de/openldap/dovecot-connect.log And the other site with ldapsearch:

The serverlog of openldap with loglevel "any": https://gwarband.de/openldap/openldap-connect.log Note: openldap waits 1 Minute before he says "TLS negotiation failure" after the connect. and dovecot says direct "Connect error" I've also delete the TLSCipherSuite from openldap. Tobias Am 2017-03-18 14:01, schrieb Tomas Habarta: > Increase log level on server

Hi, been running Dovecot 2.2.27 against OpenLDAP 2.4.40 normally over the unix socket on the same machine, but tried over inet with STARTTLS and it's working ok... I would suggest double-checking key/certs setup on OpenLDAP side; for the test I have used LE certs, utilizing following cn=config attributes: olcTLSCertificateKeyFile contains private key olcTLSCertificateFile contains

I want to bond together both interfaces on my dom0 using IPMP to provide a redundant path. Is this supported? - I''ve done a google and found no specific mention of doing exactly this so I''d like to know if it is possible before I attempt it. Many thanks, Matt. -- This message posted from opensolaris.org

I've tested your soulution, but it also says the same error. I've tested all combinations of: - tls_ca_cert_file = <cert> - tls = yes - tls_require_cert = demand Every time it says "Connection error". Only when tls is uncommented it says "TLS required". Additional information from my contact with the openldap-technical mailing list: The

Well, if ldapsearch works, try to replicate its settings for dovecot client. It's not obvious what settings ldapsearch uses, have a look at default client settings in /etc/openldap/ldap.conf, there may be something set a slightly different way. Also double check permissions for files used by dovecot, I mean mainly the file listed for tls_ca_cert_file as dovecot may not have an access for

I have a problem receving calls via the ISDN line, using the followin components Asterisk 1.0.9 with asterisk@home chan_capi-cm-0.6 AVM Fritz card datalink protocol = point to multimode I can make calls out with no problems so the issue is only incoming calls. When I make the call from an external line to the ISDN line connected to asterisk, I get a busy signal after about 5 seconds. I have

Just cross pairs 1-2 and 4-5 1 <--> 4 2 <--> 5 Never done an E1, but I think it's the same for a T1 4 wire cable. Tim Thompson Commercial Sales Engineer http://www.amatechtel.com (806) 722-2227 -----Original Message----- From: bam [mailto:bam@cqm.co.uk] Sent: Monday, December 29, 2003 9:12 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] E100P pinouts

Background: Thanks to the LARTC howto, this list and Stef Coene''s and devik''s excellent web sites I now have an ethernet bridge (patch bridge-nf.0.0.7) happily prioritising traffic (12Mbit) into 10 queues (9 for IP and 1 for non-IP) using a combination of iptables (fwmark) and htb3 and sfq. Many thanks. At the moment I''m filtering all non-IP traffic by setting the

Increase log level on server side as well to see what the server says... You may remove anything in TLSCipherSuite for the purpose of testing too. Hopefully anyone knowing OpenLDAP internals could help you analyse it more deeply. Tomas On 03/18/2017 01:31 PM, info at gwarband.de wrote: > I've replicate the settings from ldapsearch to dovecot but no success. > To the certificate: >

I've finally managed that running on Debian 8 test machine by commenting tls_ca_cert_file = option from dovecot-ldap.conf, so only tls = yes tls_require_cert = demand Not sure why is that as on my CentOS6 Dovecot works even with that commented option. May be that CentOS and Debian uses different ldap library or different versions or there's another peculiarity ... Anyway, when