search for: daram

...oo soon. After reviewing the long list of things it did do, but didn't before... I see, "Join failed - cleaning up". I have not listed the entire list of things it did accomplish but will if needed. Here is the "end" where it appears to go wrong (I think)... Partition[DC=daram,DC=com] objects[5985/14688] linked_values[0/385] dsdb_replicated_objects_convert: Ignoring object outside partition c67ea78b-bf13-4fff-9edf-7f1d71013476 DC=DomainDnsZones,DC=daram,DC=com: WERR_DS_ADD_REPLICA_INHIBITED dsdb_replicated_objects_convert: Ignoring object outside partition e511e246-2bca-...

...unsecure Dynamic Updates. None of this may have anything to do with the problem. It seemed to me the failure to join has something to do with DNS. It throws a different error at the end. I've also included output around all the other things with an error: ... Partition[CN=Configuration,DC=daram,DC=com] objects[2511/8488] linked_values[3/1056] Failed to commit objects: DOS code 0x000021bf Missing target object - retrying with DRS_GET_TGT Partition[CN=Configuration,DC=daram,DC=com] objects[2913/8488] linked_values[3/1056] ... Partition[CN=Configuration,DC=daram,DC=com] objects[3882/8488] li...

...systemd-resolved) Then create a new /etc/resolv.conf: search YOUR_DNS_DOMAIN nameserver AN_EXISTING_AD_DC Once the DC is joined, change the 'nameserver' line to point the new DC's ipaddress i.e. itself > > /etc/krb5.conf: > > [libdefaults] > default_realm = DARAM.COM > # dns_lookup_realm = false > # dns_lookup_kdc = true You only need the four lines above, uncomment the last two > > All suggestions failed. > > I modified the last suggestion.. I had to add the -U option because > there is no user in the DOMAIN for the U...

On Sat, 24 Nov 2018 07:36:56 +0000 "Barry D. Adkins via samba" <samba at lists.samba.org> wrote: > >>As you are are using Ubuntu 18.04, you could just install Louis's > >>Samba packages. They will install over and replace your existing > >>Samba packages. > > > >I did this and the domain join with a Samba DC succeeded. > > Well

Hai Barry, We know about exchange might be a problem, the others i dont know.. Check the windows schema levels. https://wiki.samba.org/index.php/AD_Schema_Version_Support You could try a clean setup as shown by my howto. Before you install setup ip and hostname in the windows DNS for the linux server. Make sure you use a name thats never used before, just to be sure of no side effects.

On Wed, Dec 5, 2018 at 1:24 PM Barry D. Adkins <Barry at daram.com> wrote: > > > If only this would have been my problem, yet the _msdcs.my.domain zone is > in Windows DNS. Strange we are getting the same error. > > > *_msdcs.my.domain zone is in Windows DNS* Being 'in' DNS is not the same as it existing as it's own dns...

...le for IPv6 capable hosts > >> ::1 localhost ip6-localhost ip6-loopback > >> fe00::0 ip6-localnet > >> ff02::1 ip6-allnodes > >> ff02::2 ip6-allrouters > >> ff02::3 ip6-allhosts > > >> Checking file: /etc/resolv.conf > >> search daram.com > >> nameserver ##.##.##.20 > > >Here the ip shown above, where is this one resolving to, i > hope the ADDC server. > > Yes to the ADDC Server > > >If you dont use systemd-resolved, thats fine, but make sure > you removed it correctly. > >That...

...ion. I have not had a chance to see if that made a difference. I did not know Samba cared if it were one vs. the other. -Barry Adkins From: andrew at ruscica.com [mailto:andrew at ruscica.com] On Behalf Of Andrew Ruscica Sent: Wednesday, December 5, 2018 9:17 PM To: Barry D. Adkins <Barry at daram.com> Cc: samba at lists.samba.org Subject: Re: [Samba] Setup a Samba AD DC as an additional DC On Wed, Dec 5, 2018 at 1:24 PM Barry D. Adkins <Barry at daram.com<mailto:Barry at daram.com>> wrote: If only this would have been my problem, yet the _msdcs.my.domain zone is in Windows...

...Deleted > CN=DCU18,CN=Servers,CN=MySite,CN=Sites,CN=Configuration,DC=myd > omain,DC=com > ERROR(ldb): uncaught exception - LDAP error 10 LDAP_REFERRAL > - <0000202B: RefErr: DSID-030A0AEB, data 0, 1 access points > ref 1: '50bb59f8-933c-41a5-87d9-f98ad1fa4e10._msdcs.daram.com' > > <ldap://50bb59f8-933c-41a5-87d9-f98ad1fa4e10._msdcs.mydomain.com> > File > "/usr/lib/python2.7/dist-packages/samba/netcmd/__init__.py", > line 176, in _run > return self.run(*args, **kwargs) > File > "/usr/lib/python2.7/dist-packa...

...yte, but it has meant 8 bits for the last 30 years. There's even an ISO/IEC standard. I know of architectures like Texas' C55x DSPs that address 16 bits at a time, but even their data sheets state: • 256K Bytes Zero-Wait State On-Chip RAM, Composed of: • – 64K Bytes of Dual-Access RAM (DARAM), 8 Blocks of 4K x 16-Bit • – 192K Bytes of Single-Access RAM (SARAM), 24 Blocks of 4K x 16-Bit Perhaps you could begin by defining more accurately what you're talking about? /jakob

...bits for the last 30 years. There's even an ISO/IEC standard. > > I know of architectures like Texas' C55x DSPs that address 16 bits at a time, but even their data sheets state: > > • 256K Bytes Zero-Wait State On-Chip RAM, Composed of: > • – 64K Bytes of Dual-Access RAM (DARAM), 8 Blocks of 4K x 16-Bit > • – 192K Bytes of Single-Access RAM (SARAM), 24 Blocks of 4K x 16-Bit > > Perhaps you could begin by defining more accurately what you're talking about? I'm assuming he means an architecture where CHAR_BIT > 8. -Eli

Hai, I had a quick look. Barry, can you get this script and run it. https://raw.githubusercontent.com/thctlo/samba4/master/samba-collect-debug-info.sh Then post the results to the list. It collects all info i need to have a better look. I have a few ideas, this might be a resolving order problem, i've based on the errors below. Can you also post the output of bind from the point its

Dear all, i am new in R. I am writing a review paper about batteries. However, i am interested in analyzing all the papers by keywords, author, references and year. This could be done by "refviz" a software, which is only running on windows machines and which is not free. So my question to you is, is it somehow possible to write a script that can do all of this work? And if yes, with

...years. There's even an ISO/IEC standard. >> >> I know of architectures like Texas' C55x DSPs that address 16 bits at a time, but even their data sheets state: >> >> • 256K Bytes Zero-Wait State On-Chip RAM, Composed of: >> • – 64K Bytes of Dual-Access RAM (DARAM), 8 Blocks of 4K x 16-Bit >> • – 192K Bytes of Single-Access RAM (SARAM), 24 Blocks of 4K x 16-Bit >> >> Perhaps you could begin by defining more accurately what you're talking about? > > I'm assuming he means an architecture where CHAR_BIT > 8. AFAIK, CHAR_B...

...ge man:resolv.conf(5) in a different way, # replace this symlink by a static file or a different symlink. # # See man:systemd-resolved.service(8) for details about the supported modes of # operation for /etc/resolv.conf. nameserver 127.0.0.53 /etc/krb5.conf: [libdefaults] default_realm = DARAM.COM # dns_lookup_realm = false # dns_lookup_kdc = true # The following krb5.conf variables are only for MIT Kerberos. kdc_timesync = 1 ccache_type = 4 forwardable = true proxiable = true # The following encryption type specification will be used by MI...

> Please start a thread on llvmdev about this functionality, and outline what other intrinsics will have to change to add non-8-bit byte support. Well, memset is the only we have seen so far (our back-end is ~50% finished for an initial release). We have our own front-end as well (we are currently not using the clang front-end), and currently don't use many llvm intrinsics (only

...a. 983 IN PTR Win2012DC.domain.com. ;; Query time: 0 msec ;; SERVER: 127.0.0.53#53(127.0.0.53) ;; WHEN: Sat Dec 01 15:20:29 CST 2018 ;; MSG SIZE rcvd: 89 **************** SAMBA-DEBUG-INFO **************** Collected config --- 2018-12-01-13:30 ----------- Hostname: houdcu01 DNS Domain: daram.com FQDN: sambaDC.domain.com ipaddress: 131.192.176.40 ----------- Samba is not being run as a DC or a Unix domain member. Checking file: /etc/os-release NAME="Ubuntu" VERSION="18.04.1 LTS (Bionic Beaver)" ID=ubuntu ID_LIKE=debian PRETTY_NAME="Ubuntu 18.04.1 LTS" VER...

...pdate And for testing set these to yes in smb.conf winbind enum users = no winbind enum groups = no And here you go all you users ;-) Set it back to no and then use getent passwd username. ;-) Greetz, Louis > -----Oorspronkelijk bericht----- > Van: Barry D. Adkins [mailto:Barry at daram.com] > Verzonden: donderdag 29 november 2018 16:09 > Aan: L.P.H. van Belle > Onderwerp: RE: [Samba] Setup a Samba AD DC as an additional DC > > I will follow your instructions. > > As for this: > > >> For the moment if we could go back to the Member Server >...

On Sat, 17 Nov 2018 22:54:43 +0000 "Barry D. Adkins" <Barry at daram.com> wrote: > > > The problem is that getenv does not return any AD domain users or > > groups. From much research this seems to be because nsswitch is not > > setup for Samba. > > >>I take it you mean 'getent' > YES > > > The Libnss winbi...

I've installed these packages: apt-get install samba winbind libnss-winbind libpam-winbind libpam-krb5 krb5-config Installing on fresh Ubuntu 18.04 server Nothing is configured yet as following the wikis you come to the DNS configuration before you get to configuring Samba stuff. Wiki states: If you are planning to set up a Samba Active Directory (AD) domain controller (DC) using the