search for: cs8

Hey all, back from vacation and seeing ansible 2.12 in the repos now. Anything to be aware of when upgrading from 2.9 to 2.12 in CS8? -- Thanks, Leon

...14 stty -a speed 38400 baud; rows 24; columns 80; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc -ixany -imaxbel -iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echo...

.../dev/ttyS0 -a speed 4800 baud; rows 0; columns 0; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 hupcl -cstopb cread clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff -iuclc -ixany -imaxbel -iutf8 -opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 -isig -icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -e...

http://bugzilla.mindrot.org/show_bug.cgi?id=282 ------- Additional Comments From stevesk at pobox.com 2002-06-22 06:15 ------- what kernel and glibc version? try with "stty -parenb" on client side. ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee.

Am 21.02.22 um 16:24 schrieb Fabian Arrotin: > On 21/02/2022 15:49, Leon Fauster via CentOS wrote: >> Hey all, back from vacation and seeing ansible 2.12 in the repos now. >> Anything to be aware of when upgrading from 2.9 to 2.12 in CS8? >> > > You'd be lucky if it works directly , as there were some semantic > changes in ansible, so you'll probably have to review all the changes, > and if ansible-core just has the modules (it's a stripped down version > of ansible, as you're supposed to do...

Hi, on my system (Linux 2.6.18.8 - ia64), if a domain write on the xencons before xenconsole is initialized the domain gets back what it wrote. This patch fixes this issue by making raw the pty slave very early. (I suppose it doesn''t happen with linux as a guest because it takes a little bit of time before writing to xencons). Tristan. _______________________________________________

I setup a ssh chroot jail following this[1] guide. It works for my user to login, use ls and use scp which is all I really want. I do have a problem I cannot solve: when connected and navigating the filesystem, the backspace key actually moves the cursor forward and does not delete what I type. I may have found a hint from some googling that readline will read in /etc/inputrc on login but if

...ailable. >> >> >>> # ls -halZ /etc/sssd/sssd.conf >>> ls: cannot access '/etc/sssd/sssd.conf': No such file or directory >> >> Looks like you need to figure out what happened to your >> /etc/sssd/sssd.conf file.? FWIW - I've updated my one CS8 machine to >> 2.8.1-1 and it seems to be fine. > > I did not do anything specific to the configuration file. I tried to > reinstall the new sssd-common pacakge, but it will not install the > /etc/sssd/sssd.conf file. I can not remove the package because it will > remove a lot o...

...t;> >>>> # ls -halZ /etc/sssd/sssd.conf >>>> ls: cannot access '/etc/sssd/sssd.conf': No such file or directory >>> >>> Looks like you need to figure out what happened to your >>> /etc/sssd/sssd.conf file.? FWIW - I've updated my one CS8 machine to >>> 2.8.1-1 and it seems to be fine. >> >> I did not do anything specific to the configuration file. I tried to >> reinstall the new sssd-common pacakge, but it will not install the >> /etc/sssd/sssd.conf file. I can not remove the package because it will...

...gt;> # ls -halZ /etc/sssd/sssd.conf >>>>> ls: cannot access '/etc/sssd/sssd.conf': No such file or directory >>>> >>>> Looks like you need to figure out what happened to your >>>> /etc/sssd/sssd.conf file.? FWIW - I've updated my one CS8 machine to >>>> 2.8.1-1 and it seems to be fine. >>> >>> I did not do anything specific to the configuration file. I tried to >>> reinstall the new sssd-common pacakge, but it will not install the >>> /etc/sssd/sssd.conf file. I can not remove the pac...

...echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo -extproc iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -ignbrk brkint -inpck -ignpar -parmrk oflags: opost onlcr -ocrnl tab0 -onocr -onlret cflags: cread cs8 -parenb -parodd hupcl clocal -cstopb -crtscts -dsrflow -dtrflow -mdmbuf cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>; eol2 = <undef>; erase = ^?; erase2 = ^H; intr = ^C; kill = ^U; lnext = ^V; min = 1; quit = ^\; reprint = ^R; start = ^Q; sta...

When running R from the terminal on Linux (Ubuntu 16.04), it core dumps whenever / wherever I press Ctrl-4 or Ctrl-\. You get thrown back to the terminal with "Quit (core dump)" being the only message. Grepping the R source code, it doesn't look like that message is generated by R itself. Over on Twitter, it has been confirmed to also happen on macOS. $ R -d valgrind --vanilla

...| IMAXBEL | IGNBRK | BRKINT | INPCK | IGNPAR | PARM RK); t.c_oflag &= ~(OPOST | ONLCR | OCRNL | OXTABS | ONOEOT | ONOCR | ONLRET); t.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CCTS_OFLOW | CRTS_IFLOW | CDTR_IFLOW | CDSR_OFLOW | CCAR_OFLOW); t.c_cflag |= (CS8); t.c_cc[VMIN] = 1; t.c_cc[VTIME] = 0; tcsetattr(dev->fd, TCSANOW, &t); val = fcntl(dev->fd, F_GETFL, 0); if (val >= 0) { fcntl(dev->fd, F_SETFL, val | O_NONBLOCK); } } e...

...baud; rows = 34; columns = 80; ypixels = 0; xpixels = 0; intr = ^c; quit = ^|; erase = ^h; kill = ^u; eof = ^d; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^q; stop = ^s; susp = ^z; dsusp = <undef>; rprnt = ^r; flush = ^o; werase = ^w; lnext = ^v; -parenb -parodd cs8 -cstopb hupcl cread -clocal -loblk -parext -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl -iuclc ixon -ixany -ixoff -imaxbel isig icanon -xcase echo echoe echok -echonl -noflsh -tostop echoctl -echoprt echoke -defecho -flusho -pendin iexten opost -olcuc onlcr -ocrnl -onocr -onlre...

...ion: panic in 5 seconds Dec 15 00:11:05 smarteyebox syslogd 1.4.1: restart. I'm not sure if it is due to the usb2serial adapter but i think so because no panic in that system before. To reproduce it: a) In a gnome-terminal im executing a bash script like this: FILE=/root/dump rm $FILE stty cs8 ignbrk cread clocal raw 4800 -echo $1 < /dev/ttyUSB0 killall cat cat /dev/ttyUSB0 | tee $FILE & cat > /dev/ttyUSB0 ; kill %% b) The other side is a modem with an available console via serial line where i connect the USB2serial cable c) From the modem power-on i start detecting hard font...

Hey, I''ve installed Xen 3.0 on a freshly installed Debian Sarge. dom0 is working nicely (kernel 2.6.12.6-xen0). Then I created a domU, again with Debian Sarge, booting Xen''s vmlinuz-2.6.12-xenU. Unfortunately ctrl-c does not work in the domU''s console, neither if I create the domU with "xm create -c ..." nor if I attach to it later. It doesn''t matter

Hello everyone, recently I've found something I consider a bug. Correct me if I'm wrong, but I always thought that Linux' EOL is 0x0A. Imagine my surprise when I saw that all messages that are being output on to the stderr (on any Linux I've tested - Fedora and Ubuntu) are terminated with 0x0D, 0x0A. Maybe that's standard behaviour of all stderr messages in all Linux

...6.1-patched export R_LIBS=/opt/R-2.6.1-patched/lib stty erase ^H set -o vi alias src='cd $HOME/dev/src' alias include='cd $HOME/dev/include' alias bin='cd $HOME/dev/bin' alias mak='cd $HOME/dev/mak' alias lib='cd $HOME/dev/lib' #stty -parenb -istrip -ixany cs8 export PS1='['''$USER''':''$PWD'']' export CVSROOT=:pserver:jcs at 147.46.153.178:/oracle/cvs/repository ] And I has made R-executable and run that. After logging into R-Prompt, I has inputted the commands as follows * Commands [ options(CRAN = &qu...

...ion: panic in 5 seconds Dec 15 00:11:05 smarteyebox syslogd 1.4.1: restart. I'm not sure if it is due to the usb2serial adapter but i think so because no panic in that system before. To reproduce it: a) In a gnome-terminal im executing a bash script like this: FILE=/root/dump rm $FILE stty cs8 ignbrk cread clocal raw 4800 -echo $1 < /dev/ttyUSB0 killall cat cat /dev/ttyUSB0 | tee $FILE & cat > /dev/ttyUSB0 ; kill %% b) The other side is a modem with an available console via serial line where i connect the USB2serial cable c) From the modem power-on i start detecting hard font...

...00 baud; rows 33; columns 80; line = 0; intr = ^C; quit = <undef>; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0; -parenb -parodd -cmspar cs8 -hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc -ixany -imaxbel iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echop...