Displaying 7 results from an estimated 7 matches for "cp1500avr".
Did you mean:
cps1500avr
2018 Mar 10
1
UPS CYBERPOWER CP1300EPFCLCD MISSING FROMCOMPATIBILITY LIST
...S is only Lightly loaded (about 7%) as I want a long run time due to frequent power outages. This USP runs my NAS, Modem/Router, Ether switches etc. It gives me plenty of time to start my Inverter Generator.
2. In the Information Tab of the Control panel The NAS reports the USB device as CP1500AVR UPS.
I have raise this difference of names with Synology but they have told me this is normal. I don?t know but my instinct tells me it?s not?
My question is if you release a new driver(s)/packages, does Synology have to do an update to the DSM for this to change? I would think so?
I am assumin...
2010 Nov 19
1
Nut compatibility list addition
Hi Patrick,
2010/11/15 Patrick O'Malley
> I've confirmed that the CyberPower CP1350AVRLCD works with nut using
> the USB port and the usbhid-ups driver. It is not on your list.
> Thanks!
>
have you checked all variables, and most of all that shutdown works as
expected?
ie http://new.networkupstools.org/user-manual.html#Testing_shutdowns
please also send us an upsc output.
2019 Mar 30
2
upssched Not Running
2019 May 25
2
Low Battery False Alarms
2019 Apr 03
2
upssched Not Running
...f:
> $ grep -Ev "^(#|\s*$)" /etc/nut/nut.conf
> MODE=standalone
>
> ups.conf:
> $ grep -Ev "^(#|\s*$)" /etc/nut/ups.conf
> [myups1]
> driver = usbhid-ups
> port = auto
> vendorid = 0764
> desc = "CyberPower 1350VA/CP1500AVR/CST135XLU on rockenfield"
> pollinterval = 10
> ignorelb
> override.battery.charge.low = 80
> override.battery.charge.warning = 90
> override.battery.runtime.low = 900
>
> upsd.conf:
> $ grep -Ev "^(#|\s*$)" /etc/nut/upsd.conf
> LI...
2018 Mar 10
2
UPS CYBERPOWER CP1300EPFCLCD MISSING FROMCOMPATIBILITY LIST
...rg/stable-hcl.html
I am very new to all this but do have a background in IT. I have been
retired for 18 years so am a bit out of touch so please excuse if I am a bit
fuzzy.
I will try my best to explain my issue below.
When I plug my UPS into my Synology NAS DS216+II is identifies it as a
CP1500AVRLCD and uses the "usbhid-ups" which is based on publicly available
protocol so the list says.
The DS216 is acting as a NUT server and I have two Raspberry Pi's (RPi's)
running Debian "Jessie" and running "nut-client" so that they can be
gracefully shut down...
2019 Apr 03
0
upssched Not Running