search for: cooledit

Hi, I try to run Cooledit pro under wine, but it doesn't works : The installation works fine, but when i run wine /var/wine/coolpro/coolpro.exe the picture of cooledit is drawing, and it freeze after that, and nothing happen. I have read on the application databases that cooledit run very fine with wine, and a frien...

I'd just like to post a little success story to cheer people up. :-) I'm now able to run CoolEdit Pro 1.2 without problems. First I ran the installation program with wine. Worked nicely. Then there was a problem. When I tried to launch coolpro.exe it complained that it couldn't find a dll called "pnc3250.dll" and therefore couldn't load the filter "Ra3.flt". Since I...

According to the application database at the Wine home page, other people have successfully run the audio app. CoolEdit. On my Debian unstable system Wine begins to open CoolEdit Pro 2000 ('wine /home/tilleyrw/Cool2000/cool2000.exe') and then fails midway through the initialization process with the following log: tillarium:/home/tilleyrw# cat /tmp/wine.log.i1J5ID FIXME:pthread_rwlock_rdlock FIXME:pthrea...

...r a 4 minute song (tested at 128 and 160kbit). I'm running Windows 2000 and this has happened in oggenc, oggdrop, and CDEX, though I've also been able to get good encodings with each of these. I think the only clean encodings have been .wav's that I've made myself with SoundForge or CoolEdit, the bum ones have been tracks I've pulled off of CDs (with CDEX, EAC, and Windows native). Clues? -eric --- >8 ---- List archives: http://www.xiph.org/archives/ Ogg project homepage: http://www.xiph.org/ogg/ To unsubscribe from this list, send a message to 'vorbis-request@xiph.org...

I have a TDM card in a asterisk machine. I found that once I used it to call out, the call status changed to "connected" even the callee is still ring. How could asterisk distinguish the "ringing" and "connected" in zap channel? thanks.

I forgot the attached file the last time! I tried execute Cooledit2000.exe with these versions of wine. tillarium:/home/tilleyrw# dpkg -l | grep wine ii libwine 0.0.20011004-1 Windows Emulator (Library) ii libwine-dev 0.0.20011004-1 Windows Emulator (Development files) ii wine 0.0.20011004-1 Windows Emulator (Binary Emulator) ii wine-doc...

...ct.student.utwente.nl/pub/groups/kolabore/ogg/ . It contains a single .WAV file. You can make those difference-samples yourself pretty easy, too. All you need is a wave editor that supports inverting and mixing two samples plus some tool to decode your .ogg back to .wav. For my experiments, I used CoolEdit and Winamp's diskwriter. Either the original .wav or the decoded .ogg have to be "inverted", which means that the sample is flipped at the x-axis. (Flipping it at the y-axis would make the sample play backwards.) For example, if a sample in the whole clip has the value +10000 (for si...

When I did a 'wine --debugmsg warn+all /home/tilleyrw/Cool2000/cool2000.exe' the following core dump file resulted. Due to its length, I'm attaching it as a file. The most interesting section is where it reads: warn:dosfs:DOSFS_FindUnixName 'KERNEL32.dll' not found in '/home/tilleyrw/Cool2000' warn:dosfs:DOSFS_FindUnixName 'KERNEL32.dll' not found in

Hello, I'm using Speex1.1.11.1 source code. I enabled dereverb by speex_preprocess_ctl(). I try different dereverb_level and dereverb_decay values and it seems to not work. I generate some test files in CoolEdit using reverb or echo and then preprocess it by speex_preprocess(preprocess, input, NULL); and output is the same as input:(. Denoising and VAD works very good. I tried dereverb with and without denoise or/and VAD. Are there some sound files to test dereverb algorithm? I'll be very grateful for...

...noise reduction, so all we need is the trimming of the start and end, of both the noise and silence. Of course, the silence part varies in length from sample to sample, but we can cap the noise to X milliseconds. As it is today, we have to manually edit these samples to remove the noise, and then Cooledit can batch-process the silence out for us. After that, we use speexenc to get the final sample, but it should be possible to do this in one operation, making everything simpler. If you can not implement this for us, maybe you could give a few hints to where we should look to implement this feature?...

...measuring it with my program (also Win32-based, also using DirectSound[Capture]) and came up with around 130ms. To measure it, I placed the mic near a speaker to get feedback going, had my program connect to itself (local loopback), and made a sound into the mic. The whole while I'd have CoolEdit recording from the mic. So the sound would go: Sound -> captured via mic -> transmitted (to itself) -> played via speaker -> captured via mic (quieter) I measured the start-to-start time between the original sound and the "echoed" sound as indicated in CoolEdit and found...

...line1 out to a phone, then sip phone's voice isn't heard on the pstn phone. Also, FXO doesn't detect the busy signal properly, if I hangup pstn phone, i can hear the busy tone on the sip phone. And yes, I've done frequency analysis for the busy tone using Adobe Audition 1.5 (ex-cooledit pro). AND FINALLY, anyone has received ANY email from Welltech sales/support emails? here is the snip from my extensions.conf, anything wrong? exten => _3741XXXXXX,1,Dial(SIP/1111${EXTEN:4}@x.y.z.x,60) exten => _3741XXXXXX,2,Congestion exten => _3741XXXXXX,3,Hangup exten => _3741XXX...

...ming of the start and end, of both the noise and silence. >> Of course, the silence part varies in length from sample to sample, >> but we can cap the noise to X milliseconds. >> >> As it is today, we have to manually edit these samples to remove the >> noise, and then Cooledit can batch-process the silence out for us. >> After that, we use speexenc to get the final sample, but it should >> be possible to do this in one operation, making everything simpler. >> >> If you can not implement this for us, maybe you could give a few >> hints to whe...

...at XM Satellite Radio in Washington, DC. I'm scouting for other low bandwidth algorithms for some voice content. Speex looks pretty interesting. My goal is to find a promising codec for 2Kbps. I see the download links on the pages offer various software, but the one link for a DECODER for COOLEDIT and WINDOWS media player is dead. I have installed the DBpowerAMP converter and have some files converted, but I cannot play the SPX files in Windows Media Player. Any guidance? A couple of other questions ==================== - Has there been any successful satellite streaming projects using...

...-F /root/MP3-Playlists/BestOf-New_Cool.lst -p 10000 -m /mp3 -h 192.168.1.15 I need this slow rate! The ices proccess changes back to 44.1kHz/16-Bit/Stereo after two or three songs. And it never changes back to 22kHz,8-Bit,Mono. 2.) Where's ices' config file located? And can I edit it with cooledit? 3.) When I try to connect to my internal IP 192.168.1.15 with WinAMP everything is ok. But when I connect over my external IP the icecast-server accepted the connection (so the firewall isn't blocking the incoming connection) but it kicked it again. What's wrong? The firewall cannot be t...

I used ChanSpy( ) recorded some test conversations. It has .raw extension. What kind of audio file is this? How can I play it? Gary -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071113/dea0f584/attachment.htm

We have a customer that does not care for the default MoH. We have downloaded some royalty free music but it sounds 'fuzzy' when we test it with the system. We down sample it to 16bit, 8KHz, Mono. We have tried with Audacity, CoolEdit Pro, & VLC. Does someone have a file they can send me that we can test with, or has any tips? Much appreciated, Matt -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20101031/fbafbda1/attachment.htm

...my Talk Talk album, and noticed that on this one live track, the stereo seemed to have suffered badly. I almost felt dizzy, because the music was rapidly shifting in and out of the right channel. So, I decided I'd do the homework and try and report the problem. I re-ripped the track, and used CoolEdit to isolate the first 90 seconds that had the problem... I started systematically increasing the bit-rate on OggDrop and was still getting the problem. At 256k, I thought of something. Before I started it all, I checked quickly the original .WAV, but I didn't listen into where it was worst in...

...n. Sound degradation is in all sound samples that I tested. Compared to Beta4, it is manifesting in absence or attenuation of high frequencies. At first I was thinking that problem with a new version is because of low-pass filter not existed in a Beta4 version. With intention to verify that I took CoolEdit to cut off frequencies above 16 kHz in original Wav files. But, when I listen such obtained Wav files I don't hear any difference compared to original Wav files. If it can be of further assistance maybe I can send to you some of my test samples. Best regards, Zvezdan <p><p>--- &g...

Just a silly test. majordomo is acting up. Monty --- >8 ---- List archives: http://www.xiph.org/archives/ Ogg project homepage: http://www.xiph.org/ogg/