Displaying 20 results from an estimated 34 matches for "config_x86_pi".
Did you mean:
config_x86_pie
2018 May 23
0
[PATCH v3 23/27] x86/modules: Adapt module loading for PIE support
...create mode 100644 arch/x86/kernel/module.lds
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 277ffc57ae13..20bb6cbd8938 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -134,7 +134,11 @@ else
KBUILD_CFLAGS += $(cflags-y)
KBUILD_CFLAGS += -mno-red-zone
+ifdef CONFIG_X86_PIE
+ KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/x86/kernel/module.lds
+else
KBUILD_CFLAGS += -mcmodel=kernel
+endif
# -funit-at-a-time shrinks the kernel .text considerably
# unfortunately it makes reading oopses harder.
diff --git a/arch/x86/include/asm/module.h...
2018 May 24
2
[PATCH v3 21/27] x86/ftrace: Adapt function tracing for PIE support
...{
> /*
> - * addr is the address of the mcount call instruction.
> - * recordmcount does the necessary offset calculation.
> + * addr is the address of the mcount call instruction. PIE has always a
> + * byte added to the start of the function.
> */
> + if (IS_ENABLED(CONFIG_X86_PIE))
> + addr -= 1;
This seems to modify the address even for modules that are _not_ compiled with
PIE, see below.
> return addr;
> }
>
> diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
> index 01ebcb6f263e..73b3c30cb7a3 100644
> --- a/arch/x86/kernel/ftr...
2018 May 24
2
[PATCH v3 21/27] x86/ftrace: Adapt function tracing for PIE support
...{
> /*
> - * addr is the address of the mcount call instruction.
> - * recordmcount does the necessary offset calculation.
> + * addr is the address of the mcount call instruction. PIE has always a
> + * byte added to the start of the function.
> */
> + if (IS_ENABLED(CONFIG_X86_PIE))
> + addr -= 1;
This seems to modify the address even for modules that are _not_ compiled with
PIE, see below.
> return addr;
> }
>
> diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
> index 01ebcb6f263e..73b3c30cb7a3 100644
> --- a/arch/x86/kernel/ftr...
2018 May 23
0
[PATCH v3 21/27] x86/ftrace: Adapt function tracing for PIE support
...ce_call_adjust(unsigned long addr)
{
/*
- * addr is the address of the mcount call instruction.
- * recordmcount does the necessary offset calculation.
+ * addr is the address of the mcount call instruction. PIE has always a
+ * byte added to the start of the function.
*/
+ if (IS_ENABLED(CONFIG_X86_PIE))
+ addr -= 1;
return addr;
}
diff --git a/arch/x86/include/asm/sections.h b/arch/x86/include/asm/sections.h
index 5c019d23d06b..da3d98bb2bcb 100644
--- a/arch/x86/include/asm/sections.h
+++ b/arch/x86/include/asm/sections.h
@@ -13,4 +13,8 @@ extern char __end_rodata_hpage_align[];
extern c...
2018 Mar 13
0
[PATCH v2 21/27] x86/ftrace: Adapt function tracing for PIE support
...ce_call_adjust(unsigned long addr)
{
/*
- * addr is the address of the mcount call instruction.
- * recordmcount does the necessary offset calculation.
+ * addr is the address of the mcount call instruction. PIE has always a
+ * byte added to the start of the function.
*/
+ if (IS_ENABLED(CONFIG_X86_PIE))
+ addr -= 1;
return addr;
}
diff --git a/arch/x86/include/asm/sections.h b/arch/x86/include/asm/sections.h
index d6baf23782bc..cad292f62eed 100644
--- a/arch/x86/include/asm/sections.h
+++ b/arch/x86/include/asm/sections.h
@@ -12,4 +12,8 @@ extern struct exception_table_entry __stop___ex_t...
2018 May 24
1
[PATCH v3 21/27] x86/ftrace: Adapt function tracing for PIE support
...l instruction.
> > > - * recordmcount does the necessary offset calculation.
> > > + * addr is the address of the mcount call instruction. PIE has
always a
> > > + * byte added to the start of the function.
> > > */
> > > + if (IS_ENABLED(CONFIG_X86_PIE))
> > > + addr -= 1;
> >
> > This seems to modify the address even for modules that are _not_
compiled with
> > PIE, see below.
> Can one load a module not compiled for PIE in a kernel with PIE?
> >
> > > return addr;
> > > }
&...
2019 Jul 31
2
[PATCH v9 10/11] x86/paravirt: Adapt assembly for PIE support
...4
> --- a/arch/x86/include/asm/paravirt_types.h
> +++ b/arch/x86/include/asm/paravirt_types.h
> @@ -338,9 +338,25 @@ extern struct paravirt_patch_template pv_ops;
> #define PARAVIRT_PATCH(x) \
> (offsetof(struct paravirt_patch_template, x) / sizeof(void *))
>
> +#ifdef CONFIG_X86_PIE
> +#define paravirt_opptr_call "a"
> +#define paravirt_opptr_type "p"
> +
> +/*
> + * Alternative patching requires a maximum of 7 bytes but the relative call is
> + * only 6 bytes. If PIE is enabled, add an additional nop to the call
> + * instruction to e...
2019 Jul 31
2
[PATCH v9 10/11] x86/paravirt: Adapt assembly for PIE support
...4
> --- a/arch/x86/include/asm/paravirt_types.h
> +++ b/arch/x86/include/asm/paravirt_types.h
> @@ -338,9 +338,25 @@ extern struct paravirt_patch_template pv_ops;
> #define PARAVIRT_PATCH(x) \
> (offsetof(struct paravirt_patch_template, x) / sizeof(void *))
>
> +#ifdef CONFIG_X86_PIE
> +#define paravirt_opptr_call "a"
> +#define paravirt_opptr_type "p"
> +
> +/*
> + * Alternative patching requires a maximum of 7 bytes but the relative call is
> + * only 6 bytes. If PIE is enabled, add an additional nop to the call
> + * instruction to e...
2017 Oct 04
1
[RFC v3 20/27] x86/ftrace: Adapt function tracing for PIE support
...P_TEST
#endif
-#define MCOUNT_INSN_SIZE 5 /* sizeof mcount call */
+
+#define MCOUNT_RELINSN_SIZE 5 /* sizeof relative (call or jump) */
+#define MCOUNT_GOTCALL_SIZE 6 /* sizeof call *got */
+
+/*
+ * MCOUNT_INSN_SIZE is the highest size of instructions based on the
+ * configuration.
+ */
+#ifdef CONFIG_X86_PIE
+#define MCOUNT_INSN_SIZE MCOUNT_GOTCALL_SIZE
+#else
+#define MCOUNT_INSN_SIZE MCOUNT_RELINSN_SIZE
+#endif
#ifdef CONFIG_DYNAMIC_FTRACE
#define ARCH_SUPPORTS_FTRACE_OPS 1
@@ -17,6 +30,8 @@
#define HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
#ifndef __ASSEMBLY__
+#include <asm/sections.h>
+
ext...
2018 May 24
0
[PATCH v3 21/27] x86/ftrace: Adapt function tracing for PIE support
...dr is the address of the mcount call instruction.
> > - * recordmcount does the necessary offset calculation.
> > + * addr is the address of the mcount call instruction. PIE has always a
> > + * byte added to the start of the function.
> > */
> > + if (IS_ENABLED(CONFIG_X86_PIE))
> > + addr -= 1;
>
> This seems to modify the address even for modules that are _not_ compiled with
> PIE, see below.
Can one load a module not compiled for PIE in a kernel with PIE?
>
> > return addr;
> > }
> >
> > diff --git a/arch/x86/kern...
2018 May 23
33
[PATCH v3 00/27] x86: PIE support and option to extend KASLR randomization
...o handle PIE binary correctly.
- 20: Add support for global cookie.
- 21: Support ftrace with PIE (used on Ubuntu config).
- 22: Add option to move the module section just after the kernel.
- 23: Adapt module loading to support PIE with dynamic GOT.
- 24: Make the GOT read-only.
- 25: Add the CONFIG_X86_PIE option (off by default).
- 26: Adapt relocation tool to generate a 64-bit relocation table.
- 27: Add the CONFIG_RANDOMIZE_BASE_LARGE option to increase relocation range
from 1G to 3G (off by default).
Performance/Size impact:
Size of vmlinux (Default configuration):
File size:
- PIE...
2018 Mar 13
32
[PATCH v2 00/27] x86: PIE support and option to extend KASLR randomization
...o handle PIE binary correctly.
- 20: Add support for global cookie.
- 21: Support ftrace with PIE (used on Ubuntu config).
- 22: Add option to move the module section just after the kernel.
- 23: Adapt module loading to support PIE with dynamic GOT.
- 24: Make the GOT read-only.
- 25: Add the CONFIG_X86_PIE option (off by default).
- 26: Adapt relocation tool to generate a 64-bit relocation table.
- 27: Add the CONFIG_RANDOMIZE_BASE_LARGE option to increase relocation range
from 1G to 3G (off by default).
Performance/Size impact:
Size of vmlinux (Default configuration):
File size:
- PIE...
2018 Mar 13
32
[PATCH v2 00/27] x86: PIE support and option to extend KASLR randomization
...o handle PIE binary correctly.
- 20: Add support for global cookie.
- 21: Support ftrace with PIE (used on Ubuntu config).
- 22: Add option to move the module section just after the kernel.
- 23: Adapt module loading to support PIE with dynamic GOT.
- 24: Make the GOT read-only.
- 25: Add the CONFIG_X86_PIE option (off by default).
- 26: Adapt relocation tool to generate a 64-bit relocation table.
- 27: Add the CONFIG_RANDOMIZE_BASE_LARGE option to increase relocation range
from 1G to 3G (off by default).
Performance/Size impact:
Size of vmlinux (Default configuration):
File size:
- PIE...
2017 Oct 04
28
x86: PIE support and option to extend KASLR randomization
...obal cookie.
- 20: Support ftrace with PIE (used on Ubuntu config).
- 21: Fix incorrect address marker on dump_pagetables.
- 22: Add option to move the module section just after the kernel.
- 23: Adapt module loading to support PIE with dynamic GOT.
- 24: Make the GOT read-only.
- 25: Add the CONFIG_X86_PIE option (off by default).
- 26: Adapt relocation tool to generate a 64-bit relocation table.
- 27: Add the CONFIG_RANDOMIZE_BASE_LARGE option to increase relocation range
from 1G to 3G (off by default).
Performance/Size impact:
Size of vmlinux (Default configuration):
File size:
- PIE...
2017 Oct 04
28
x86: PIE support and option to extend KASLR randomization
...obal cookie.
- 20: Support ftrace with PIE (used on Ubuntu config).
- 21: Fix incorrect address marker on dump_pagetables.
- 22: Add option to move the module section just after the kernel.
- 23: Adapt module loading to support PIE with dynamic GOT.
- 24: Make the GOT read-only.
- 25: Add the CONFIG_X86_PIE option (off by default).
- 26: Adapt relocation tool to generate a 64-bit relocation table.
- 27: Add the CONFIG_RANDOMIZE_BASE_LARGE option to increase relocation range
from 1G to 3G (off by default).
Performance/Size impact:
Size of vmlinux (Default configuration):
File size:
- PIE...
2017 Oct 11
32
[PATCH v1 00/27] x86: PIE support and option to extend KASLR randomization
...obal cookie.
- 20: Support ftrace with PIE (used on Ubuntu config).
- 21: Fix incorrect address marker on dump_pagetables.
- 22: Add option to move the module section just after the kernel.
- 23: Adapt module loading to support PIE with dynamic GOT.
- 24: Make the GOT read-only.
- 25: Add the CONFIG_X86_PIE option (off by default).
- 26: Adapt relocation tool to generate a 64-bit relocation table.
- 27: Add the CONFIG_RANDOMIZE_BASE_LARGE option to increase relocation range
from 1G to 3G (off by default).
Performance/Size impact:
Size of vmlinux (Default configuration):
File size:
- PIE...
2017 Oct 11
32
[PATCH v1 00/27] x86: PIE support and option to extend KASLR randomization
...obal cookie.
- 20: Support ftrace with PIE (used on Ubuntu config).
- 21: Fix incorrect address marker on dump_pagetables.
- 22: Add option to move the module section just after the kernel.
- 23: Adapt module loading to support PIE with dynamic GOT.
- 24: Make the GOT read-only.
- 25: Add the CONFIG_X86_PIE option (off by default).
- 26: Adapt relocation tool to generate a 64-bit relocation table.
- 27: Add the CONFIG_RANDOMIZE_BASE_LARGE option to increase relocation range
from 1G to 3G (off by default).
Performance/Size impact:
Size of vmlinux (Default configuration):
File size:
- PIE...
2018 May 29
1
[PATCH v4 00/27] x86: PIE support and option to extend KASLR randomization
...o handle PIE binary correctly.
- 20: Add support for global cookie.
- 21: Support ftrace with PIE (used on Ubuntu config).
- 22: Add option to move the module section just after the kernel.
- 23: Adapt module loading to support PIE with dynamic GOT.
- 24: Make the GOT read-only.
- 25: Add the CONFIG_X86_PIE option (off by default).
- 26: Adapt relocation tool to generate a 64-bit relocation table.
- 27: Add the CONFIG_RANDOMIZE_BASE_LARGE option to increase relocation range
from 1G to 3G (off by default).
Performance/Size impact:
Size of vmlinux (Default configuration):
File size:
- PIE...
2018 Jun 25
1
[PATCH v5 00/27] x86: PIE support and option to extend KASLR randomization
...o handle PIE binary correctly.
- 20: Add support for global cookie.
- 21: Support ftrace with PIE (used on Ubuntu config).
- 22: Add option to move the module section just after the kernel.
- 23: Adapt module loading to support PIE with dynamic GOT.
- 24: Make the GOT read-only.
- 25: Add the CONFIG_X86_PIE option (off by default).
- 26: Adapt relocation tool to generate a 64-bit relocation table.
- 27: Add the CONFIG_RANDOMIZE_BASE_LARGE option to increase relocation range
from 1G to 3G (off by default).
Performance/Size impact:
Size of vmlinux (Default configuration):
File size:
- PIE...
2019 May 20
0
[PATCH v7 11/12] x86/paravirt: Adapt assembly for PIE support
...ex 2474e434a6f7..93be18bdb63e 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -343,9 +343,17 @@ extern struct paravirt_patch_template pv_ops;
#define PARAVIRT_PATCH(x) \
(offsetof(struct paravirt_patch_template, x) / sizeof(void *))
+#ifdef CONFIG_X86_PIE
+#define paravirt_opptr_call "a"
+#define paravirt_opptr_type "p"
+#else
+#define paravirt_opptr_call "c"
+#define paravirt_opptr_type "i"
+#endif
+
#define paravirt_type(op) \
[paravirt_typenum] "i" (PARAVIRT_PATCH(op)), \
- [paravirt_opptr]...