search for: com4

...Driver: apcsmart upsdrvctl.exe start outputs this errors: ---------------------------------------------------------------------------------------------------------------- Network UPS Tools - APC Smart protocol driver 3.1 (Windows-v2.6.5-5-7-g72f380c) APC command table version 3.1 w32_serial_open (COM4) setting initial state on COM4 000000A8 = w32_serial_open (COM4) Warning: no locking method is available: No error [Der Vorgang wurde erfolgreich beendet. ] vmin_ 0, vtime_ 0 action 0 vtime 0, vmin 1 ReadTotalTimeoutConstant -2, ReadIntervalTimeout -1, ReadTotalTimeoutMultiplier -1 vmin_ 1, vtime_...

...uldn't open /dev/ttyS2 ! (check permissions) fixme:dosfs:DOSFS_OpenDevice device open COM3 not supported (yet) err:file:CreateFileA Couldn't open device 'COM3'! err:dosfs:DOSFS_CreateCommPort Couldn't open /dev/modem ! (check permissions) fixme:dosfs:DOSFS_OpenDevice device open COM4 not supported (yet) err:file:CreateFileA Couldn't open device 'COM4'! and after a few more errors the client will not start and wine stops. Any ideas what could be the problem? Ismat __________________________________________________ Do You Yahoo!? Get email alerts & NEW webca...

tried to get the above program running (its a phone managment program for the siemens mobile phones) but it always brings up the error cannot open COM port.I can send AT commands to the phone via the terminal in KPPP. Martin Warby

...ing ;, failed. [C 0 ; WX 600 ; N null] err:psdrv:PSDRV_AFMGetCharMetrics No whitespace found. err:psdrv:PSDRV_AFMGetCharMetrics No whitespace found. err:psdrv:PSDRV_AFMGetCharMetrics No whitespace found. err:psdrv:PSDRV_AFMGetCharMetrics No whitespace found. fixme:dosfs:DOSFS_OpenDevice device open COM4 not supported (yet) err:file:CreateFileA Couldn't open device 'com4'! fixme:dosfs:DOSFS_OpenDevice device open COM3 not supported (yet) err:file:CreateFileA Couldn't open device 'com3'! trace:comm:GetCommState handle 132, ptr 0x40596080 trace:comm:GetCommState OK trace:comm:...

Help please, Adding "COM4:"="/dev/ttyS0" to wine/conf file doesn't seem to do the trick - comms program installed in wine still says "communication port cannot be opened" - any ideas on how to access the modem please? Thanks, Andy

...m/qmc330.ppd" [parallelports] "LPT1" = "/tmp/qmc330" [windows] "device" = "Wine PostScript Driver,WINEPS,LPT1:" Relevant lines from win.ini: [windows] device=Wine [Ports] LPT1:= LPT2:= LPT3:= COM1:=9600,n,8,1,x COM2:=9600,n,8,1,x COM3:=9600,n,8,1,x COM4:=9600,n,8,1,x FILE:= [Devices] Wine PostScript Driver=WINEPS,LPT1: [PrinterPorts] Wine PostScript Driver=WINEPS,LPT1: Excel runs fine, opens and saves files nicely, etc. My only concern now is that I can't print. I am pretty sure I have followed the docs correctly, so if I have missed som...

Hi,. I have some legacy applications for MSDOS / 95 and a new NT version of an application that i would like to use. I have un-commented the lines in wine.conf about serial access but i cant seem to get any MSDOS or win32 application to talk, is this currently supported in (the lateset) wine ? regards --- Matthew J Fletcher NPD Firmware When did ignorance become a point of view ? ---

...drake 8.0 (kernel 2.4.3). Installed wine without errors. Had a look at the ~/.wine/config and it looked ok for me. The part concerning the serial ports: [serialports] "Com1" = "/dev/ttyS0" "Com2" = "/dev/ttyS1" "Com3" = "/dev/ttyS2" "Com4" = "/dev/modem" Then I started the installer from the Toshiba-CD and installed the software for my Toshiba PDR-M5. It's not supported by gphoto (nor by gphoto2) so I am trying to get this windows-software running. The software installed ok. I start it and when I get to the conf...

...f the printer when viewing \\DC\Printers and Faxes\PrinterName, Most of the tabs are disabled. I was able to install the drivers some time ago. But not any more. The more weird thing is that for some of the network printers, the Ports tab of the Properties Pages lists "LPT1,LPT2,LPT3,COM1,...COM4,FILE" and for the others it lists "Samba Printer Port". Infact, the ones for which the drivers are already installed on the network (which I did a week ago) show the "LPT1,..." list while those printers which I just added to the printcap file by hand, display "Samba Pr...

Greetings Jeremy, Jeremy Allison wrote: > On Sun, Nov 03, 2019 at 06:37:57AM -0500, Michael Lueck via samba wrote: >> >> >> mdlueck at ldslnx01:/srv/shares/data/Nodes/jacob/home/mdlueck/Music/Alfred Brendel$ find >> . >> ./Beethoven Piano Sonatas Vol I >> ./Beethoven Piano Sonatas Vol I/Disc 1 - 01 - Piano Sonata No. 29 in B-flat major, op. 106

...indows" = "c:\\windows" "System" = "c:\\windows\\system" "Temp" = "c:\\temp" "Path" = "c:\\windows;c:\\windows\\system" [serialports] "Com1" = "/dev/ttyS0" "Com2" = "/dev/ttyS1" "Com4" = "/dev/ttyS3" [parallelports] "Lpt1" = "/dev/lp0" [x11drv] "display" = ""

Ben- I like the idea but I don''t understand how this patch can work: 1) You never put a name into `serial_devices[]'' for the summa port. The loop in `main'' that initializes the serial devices only calls `qemu_chr_open'' if there''s a string name in `serial_devices''. How did you get this to work? 2) Minor point, I don''t see the need

...and everything worked. I guess there is something wrong with serial ports on d2500cc, or maybe I am not using them correctly. There are 4 ports on the board, 2 with DB9 connectors on the back and 2 on the board itself. By default, port numbering starts from the headless ones, so DB9s are com3 and com4. There is a special setting in BIOS which swaps headless ports with DB9s, making DB9s com1 and com2. I tried all combinations without any luck. What is strange is that OpenBSD kernel detects 2 ports only, not 4, so I do not exclude a problem with OpenBSD kernel driver. Funny thing is that I picked...

...the buffer in Konsole.) ----------------------- Created symlink /home/rsteff/.wine/dosdevices/com1 -> /dev/ttyS0 Created symlink /home/rsteff/.wine/dosdevices/com2 -> /dev/ttyS1 Created symlink /home/rsteff/.wine/dosdevices/com3 -> /dev/ttyS2 Created symlink /home/rsteff/.wine/dosdevices/com4 -> /dev/modem Created symlink /home/rsteff/.wine/dosdevices/lpt1 -> /dev/lp0 Created symlink /home/rsteff/.wine/dosdevices/a: -> /media/floppy Created symlink /home/rsteff/.wine/dosdevices/c: -> ../%HOME%/.wine/fake_windows Created symlink /home/rsteff/.wine/dosdevices/m: -> /media/...

..._SHARE_READ OPEN_EXISTING trace:file:CreateFileA C:\windows\system\msvcrt20.dll GENERIC_READ FILE_SHARE_READ OPEN_EXISTING trace:comm:COMM_Init COM1 = /dev/ttyS0 trace:comm:COMM_Init LPT1 = /dev/lp0 trace:comm:COMM_Init COM2 = /dev/ttyS1 trace:comm:COMM_Init COM3 = /dev/ttyS2 trace:comm:COMM_Init COM4 = /dev/modem trace:file:_lopen ('(None)',0000) trace:file:CreateFileA (None) GENERIC_READ FILE_SHARE_READ FILE_SHARE_WRITE OPEN_EXISTING warn:file:CreateFileA Unable to get full filename from '(None)' (GLE 2) trace:file:_lopen ('C:\WINDOWS\(None)',0000) trace:file:CreateFil...

Unfortunately, almost all the Windows programs I want to run under Wine need to access the COM: ports, and I cannot get any of them to run. Typically, I get stuff like this ... fixme:comm:EscapeCommFunction16 no cid=0 found! fixme:comm:EscapeCommFunction16 no cid=0 found! err:comm:COMM16_ReadComplete async read failed 000003e3 fixme:comm:EscapeCommFunction16 no cid=3 found!

...7) is a 16550A 0000:01:0a.0: ttyS3 at I/O 0xd000 (irq = 177) is a 16550A ACPI: PCI Interrupt 0000:01:0a.1[A] -> Link [LNKC] -> GSI 19 (level, low) -> IRQ 177 Couldn't register serial port 0000:01:0a.1: -28 OK, instead of skipping ttyS2 and ttyS3 (normally old-school on-board COM3 and COM4) and allocating ttyS4 through ttyS7 for the Quattro, it is assigning ttyS2 and ttyS3 to the first pair, and then barfing (-28?) on the second pair. I looked at the config files and found: The 4.8 kernel has: # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_825...

...ed" = "fixed" "DefaultSerif" = "-adobe-times-" "DefaultSansSerif" = "-adobe-helvetica-" [FontDirs] [serialports] "Com1" = "/dev/ttyS0" "Com2" = "/dev/ttyS1" "Com3" = "/dev/ttyS2" "Com4" = "/dev/modem" [parallelports] "Lpt1" = "/dev/lp0" [ppdev] [spooler] "FILE:" = "tmp.ps" "LPT1:" = "|lpr" "LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -" "LPT3:" = "/dev/lp3&quot...

...have more than one port for video on your setup ; (Wine uses for now the first 'input image' it founds). ;; XVideoPort = 43 [fonts] ;Read documentation/fonts before adding aliases Resolution = 96 Default = -adobe-times- [serialports] Com1=/dev/ttyS0 Com2=/dev/ttyS1 Com3=/dev/modem,38400 Com4=/dev/modem [parallelports] Lpt1=/dev/lp0 [spooler] LPT1:=|lpr LPT2:=|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q - LPT3:=/dev/lp3 [ports] ;read=0x779,0x379,0x280-0x2a0 ;write=0x779,0x379,0x280-0x2a0 [spy] Exclude=WM_SIZE;WM_TIMER; [registry] ; Paths must be given in /dir/dir/file.reg format. ;...

...issions) fixme:dosfs:DOSFS_OpenDevice device open L"COM3" not supported (yet) err:file:CreateFileW Couldn't open device L"COM3"! err:dosfs:DOSFS_CreateCommPort Couldn't open device '/dev/modem' ! (check permissions) fixme:dosfs:DOSFS_OpenDevice device open L"COM4" not supported (yet) err:file:CreateFileW Couldn't open device L"COM4"! err:file:CreateFileW Couldn't open device L"COM5"! err:file:CreateFileW Couldn't open device L"COM6"! err:file:CreateFileW Couldn't open device L"COM7"! err:file:Crea...