search for: coldplugged

Hi all, Here's a brief history of my adventure: I purchased a CyberPower 685 AVR and decided to connect it through USB to my Gentoo linux machine running kernel 2.6.22. While the device was detected properly and added to /dev, it was added with the wrong permissions (gid was set to 'usb' instead of 'nut', as it was expected to be according to the rules under

Hi! I've installed NUT 2.0.2 to work with my MGE Protection Center and it works but for one thing. When I reboot the computer, at startup upsdrvctl/newhidups can't find the UPS so I have to manually unplug, replug and start upsdrvctl/upsd every time. I've installed from sourcecode onto a Gentoo machine. Where should I look for the problem (USB/hotplug/newhidups/somewhere else)?

When booting Ubuntu 6.06.1 (Linux 2.6.15-27-386), wcfxo would load but not configure. I have three ways to manually force wcfxo to configure: 1) ztcfg, 2) modprobe -f wcfxo, or of course 3) unload and reload wcfxo. Each works equally well. As a workaround, now I have to put ztcfg in rc.local, which Debian doesn't favour. I had compiled the same zaptel under Ubuntu 5.02.0 on two

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Just a little patch for the drivers.list The "Cyber Power Systems Intelligent Series CP1500EAVRLCD" ups http://eu.cyberpowersystems.com/products/ups_systems/intelligent/cp1500eavrlcd.htm Got one here running (see: https://nut.stillbilde.net/cgi-bin/nut/upsstats.cgi?host=CyberPower at upsmonitor) Works flawlessly. Patch as follows:

I have an MGE Ellipse Premium 1200 that I connected to my server using its USB cable. Nut seems to be working fine. I've done a power down test and it worked and came back up when the UPS had power again. I'm using the newhidups driver and the USB cable. The problem I'm having is that if I boot with the cable connected newhidups says it can't find the UPS. If I unplug and plug in

When I started Rails Development, I needed to use ''killall -g dispatch.fcgi'' whenever I made a change to a Model to see the change on my website. Now it seems I need to do this to see any change to the Controller as well. Any ideas of what I am doing wrong??? -- Posted via http://www.ruby-forum.com/.

Zaptel installs an /etc/modprobe.d/zaptel and an /etc/{defaults,sysconfig}/zaptel that list the modules in a different order, so If you happen to have a TDM2400P and a TDM[124]xxP, all channels change their numbers if you do a /etc/initd/zaptel restart. This is slightly confusing. (I'd file a bug if there were a bug tracking system that allowed users to submit bugs). Yours, Florian

Hi all. I''m mostly experienced with Xen 3.0-3.4 so forgive my ignorance. I''m trying to launch FC16 in rescue mode, which works fine with FC14 and Xen 3.4-PAE (but not newer Fedoras because they stopped compiling them with PAE so I gather). When it boots and gets to the point where it loads Anaconda, nothing else happens on the console. I know console variables are at least

I'm trying to set-up a ContOS 7 DomU server. I have used the PXE set-up images like I normally would for earlier versions of CentOS. Here is my config file:- name      = "centos7" memory    = 2048 disk      = ['phy:/dev/xen6/centos7,xvda,w' ] vif = [ 'mac=xx:xx:xx:xx:xx:xx' ] kernel    = "/root/xen/centos7-64/vmlinuz" ramdisk   =

Hi all, if a device doesn''t support power management (pm_cap == 0) but it is acpi_pci_power_manageable() because there is a _PS0 method declared for it and _EJ0 is also declared for the slot then nobody is going to set current_state = PCI_D0 for this device. This is what I think it is happening: pci_enable_device | __pci_enable_device_flags /* here we do not set current_state

Hey I wanted to try my hand at doing some GPU passthrough so on my ASUS M5A97 which in the pass worked with an older BIOS (but said BIOS had issues after S3 suspend) - but with a BIOS the PCI passthrough does not work. That is due to:: (XEN) IVHD Error: Invalid IO-APIC 0xff (XEN) AMD-Vi: Error initialization

On Wed, Jun 24, 2015 at 04:52:29PM +0200, Igor Mammedov wrote: > On Wed, 24 Jun 2015 16:17:46 +0200 > "Michael S. Tsirkin" <mst at redhat.com> wrote: > > > On Wed, Jun 24, 2015 at 04:07:27PM +0200, Igor Mammedov wrote: > > > On Wed, 24 Jun 2015 15:49:27 +0200 > > > "Michael S. Tsirkin" <mst at redhat.com> wrote: > > > >

On Wed, Jun 24, 2015 at 04:52:29PM +0200, Igor Mammedov wrote: > On Wed, 24 Jun 2015 16:17:46 +0200 > "Michael S. Tsirkin" <mst at redhat.com> wrote: > > > On Wed, Jun 24, 2015 at 04:07:27PM +0200, Igor Mammedov wrote: > > > On Wed, 24 Jun 2015 15:49:27 +0200 > > > "Michael S. Tsirkin" <mst at redhat.com> wrote: > > > >

Hi Ben, Ok! I've removed nvidiafb from kernel config. Now linux is able to boot with the msi Geforce GT 710 card and eventually ends up displaying a slightly distorted lightdm login screen. The mouse cursor moves, but never changes to typing cursor mode when hovering the password input box, and I am also unable to enter the password, some graphics glitches in the login box too. There are

Today is my day! This is with Xen 4.4 (pulled today) when I build a kernel in dom0 and have two guests launching at the same time. This is what I get: (XEN) Assertion ''l1e_get_pfn(MAPCACHE_L1ENT(hashent->idx)) == hashent->mfn'' failed at domain_page.c:203 and it blows up. Here is the full log: \ \/ /___ _ __ | || | | || | _ _ _ __ ___| |_ __ _| |__ | | ___

Hi Arnd, Sorry for sending this email directly to you, but maybe you can help me, or guide me where to look for. I am having big trouble getting the nouveau driver to work with either Geforce GT 710 or Geforce 9800 GT on an ARM armv7l Cortex-A9 with PCIe x1/x4 with linux kernel 4.15-rc. The Geforce GT 710 hangs the kernel boot process for a while and then a kernel oops occurs, due to nvidiafb,

On Wed, 2016-02-03 at 15:28 -0500, Konrad Rzeszutek Wilk wrote: > > > And I wonder if the XEN_DOMCTL_irq_permission aka, > > > xc_domain_irq_permission > > > had been called. I remember that at some point we missed it for > > > Xend.. > > > > > False alarm. > > It was all in Linux. Attached are four patches (the first two > are for

Hello, I am desperately trying to get pci-passthrough to working. I want to pass a tg3 nic to domU. when booting domU I get a lot of messages: pcifront pci-0: pciback not responding!!! in domU, "ifconfig eth... adress up" hangs for 2 minutes, finally ifconfig -a shows a correct setting with no data transmitted rx/tx The IP Adress is being assigned, but there is no data transmission

Has anyone had issues starting xen0 on a md? I have installed it a few times now w/ and w/o raid. Anytime I have a raid1 mirror, Xen panics on boot when trying to mount /. It gets past waiting for /dev/md0 to appear. John _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Has anyone had issues starting xen0 on a md? I have installed it a few times now w/ and w/o raid. Anytime I have a raid1 mirror, Xen panics on boot when trying to mount /. It gets past waiting for /dev/md0 to appear. John _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users