search for: coaxial

Hi, Digium's E400P has RJ45 conector and my E1 link has BNC concetor. Could someone tell me the cable pinouts to make this conection? thanks Eduardo

...It's an Insignia NS-PAH5101 > It does not have a separate power source, > just plugs for the pink and green sockets. > The cables are pretty thin. > If the problem is shielding, > is there something I could do to shield the cables? not really, the wire itself has to be shielded coaxial wire. if its actually the headset itself, I'd suggest getting another one. I've had better luck with USB headsets of late instead of analog ones plugged into on-board audio, as the onboard audio microphone inputs are generally of very poor quality. -- john r pierce, recycling bits...

...s Control & RTD Cables Instrumentation Signal Cables - Multicore / Multipair / Multitriad Thermocouple Extension Cables Thermocouple Compensating Cables Instrument Tubing Bundles DATA COMMUNICATION CABLES LAN, Computer, Data Cables Coaxial, Twinaxial, Bus Cables UTP Cat 5/6/7, Networking Cables RS 232, 422, 423, 485, etc Cables ELASTOMER CABLES Single Core Flexible, Lead Wires Elastomer Control, Power Cables- VIR, TRS, EPR, PCP, CSP HOFR Portable Power Cables Lift & Eleva...

------ Original Message ------ From: "Tony Kasule" <timotsmith at gmail.com> To: "Asterisk Users Mailing List - Non-Commercial Discussion" <asterisk-users at lists.digium.com> Sent: 30/06/2015 8:34:47 p.m. Subject: Re: [asterisk-users] Help With Physical Layer >Hello, > >Anyone to help me with this issue? It has never worked :( Hi Tony I'm not

...rote: > > Hi Tony > > I'm not familiar with the card you but 120 ohm is usually twisted pair, > and 75 ohm is coax (usually). If it is changeable its usually done with > jumpers on the card. > The new Digium cards have no jumpers anymore and I don't think they support coaxial cables. The only changes we can make on the digium cards is to switch between E1/T1 modes and that's done when loading it in the kernel using modprobe. > I have used RAD modems before and their cable will have a specific > pinout that you need to match. I doubt your digium card by defau...

...> switching any dimmers in the general area to either 100% on or > totally off. correct. normally, repeat, normally, wiring for outlets and light are different wire runs, but they may be common leg of 240 mains at panel. <<>> > not really, the wire itself has to be shielded coaxial wire. if its > actually the headset itself, I'd suggest getting another one. > > I've had better luck with USB headsets of late instead of analog > ones plugged into on-board audio, as the onboard audio microphone > inputs are generally of very poor quality. even with usb he...

a.org/wiki/Power_jack</a>, I can read &quot;Most of the other coaxial DC po= wer connectors have no specified voltage association&quot;, I would say no.= <br> <br>2. Which PoE injector would best fit with these ?<br>The 5V one or the = 7.5V one ?<br><br>Regards<br> --001636831cda1c127704967e37bd--

...is one in your town! Call and ask them BEFORE you order! They are very familiar with these plans! You will need these easy to obtain parts : 270-235 mini box 271-1325 2.2k ohm resistor 278-212 chasis connectors RG59 coaxial cable #12 copper wire Variable capacitor They may have to special order the variable capacitor, But WHY WAIT for a special order? WE have them! All you need now is the EASY TO ASSEMBLE plans to show you how this educational device in 30 MINUTES! WE h...

Hi. I'm looking at ordering a 30-channel ISDN connection from telia (a swedish operator) and then using a Wildcard TE110P card with that and asterisk to do IVR. Can I be certain that the TE110P card will work with that ISDN connection? A 30 channel ISDN certainly sounds like an E1 connection, but I couldn't get any clear answers from the operator if it is. Has anyone used the TE110P

...gt; although that often sounds like a buzz. lamp dimmers too, try >> switching any dimmers in the general area to either 100% on or >> totally off. No dimmers, but I tried turning off the overhead flourescent lights. No effect. >> not really, the wire itself has to be shielded coaxial wire. if its >> actually the headset itself, I'd suggest getting another one. >> >> I've had better luck with USB headsets of late instead of analog >> ones plugged into on-board audio, as the onboard audio microphone >> inputs are generally of very poor qualit...

Hello Im from Denmark and i've just got my Digium TE405P. But i have some problems when i connect it to my E1 connection (ISDN30). My telco delivered a alcatel box witch have a G.703 120ohm (DB9 with a serial to rj45) and a 75ohm coax connection. I've tried to connect using the 120ohm with rj45 and a ordinary utp cable. But it dosent seem to work. I've tried several zaptel.conf

...tion well enough to avoid promoting 16-bit to > 24-bit without noticing their mistake. I suspect that this is sometimes done dishonestly in order to sell hi-fi enthusiasts DVD-A's made from lower-quality source material. After all, they do sell $35 dollar "high definition" digital coaxial S/PDIF cables at your local Radio Shack. And you lost me on the last paragraph there, but that's okay. Thanks for the clarification. - BW On Sat, Jan 8, 2011 at 1:13 AM, Brian Willoughby <brianw at sounds.wa.com> wrote: > > On Jan 7, 2011, at 21:38, Brian Waters wrote: >>...

How many TDM2400P cards can I safelly install in one PC? I'm loking for answers from whoever has a working scenario with * and a number of cards higher than one. Thx, Juan __________________________________________________________ Mensagem enviada usando o Webmail da ViaLink ver. 2.7.8

On Fri, Jun 05, 2015 at 12:30:16PM -0500, Michael Hennebry wrote: > On Fri, 5 Jun 2015, Frank Cox wrote: > > >On Fri, 5 Jun 2015 12:05:43 -0500 (CDT) > >Michael Hennebry wrote: > > > >>whether a microphone will introduce humming? > > > >Is it a 60 cycle hum? If so, it's probably induced by poor grounding. > > I suspect so. > Is that

...to be the IPv4 address of br0 (LAN) or the one of eth1 (WAN)? (before I had this on a virtual machine, there was only one interface, but here ...?) and now the bigger problem: here just the IP addresses for better troubleshooting; the ISP installed a box (NAT router), that is a medium converter (coaxial cable to ethernet twisted-pair cable), too; this box has on WAN side, my public IP an LAN side it has 192.168.0.1 this box which should be installed instead of my old NAT-router has the following IP addresses on device br0 192.168.1.100 (LAN) and on device eth1 (WAN) 192.168.0.127 the old router...

On Jan 7, 2011, at 18:08, Declan Kelly wrote: > On Fri, Jan 07, 2011 at 05:11:26PM -0800, brianw at sounds.wa.com wrote: > [NIN 24/96] > >> Thanks! That's interesting to note. I think that I ended up with >> the true 24/96 files, but I am curious: How do you tell whether you >> have the full 24/96 or not? > > Extract to WAV, do a hex dump, and look for

...his is one approach I suppose. I > was curious about DIY solutions also however. Well, when I was shopping for a MiniDisc player (not as a primary format), there were many with optical input, but only the professional rack mount MD from SONY has optical output. Thankfully, it also had coaxial digital, which is sometimes more convenient. I'm actually in the market for a FLAC player, but don't really know too many details about what's out there. I just got an iPhone, and I've been trying to research the possibilities for FLAC decoding there. I'm also trying to...

I'm after the cheapest way to decode a flac stream with following criteria; - Transport from UPnP (DNLA) NAS using either WiFi or Cat5 networking - Toslink digital out for using existing HiFi DAC. - Low power consuption (eg just few Watts - it's just a decoder anyway). There seems a real lack of Flac players that are cheap and HiFi separates integratable like current-day CD players. All