search for: classids

Hi, I´m shaping traffic using htb on both interfaces, I noticed that shaping download traffic is workinggreat but shaping upload traffic is not working at all (no sent packets, no dropped, no overlimits)I have eth0 facing the backbone and eth1 facing the LAN. Thanks for your help.These are the commands I run:tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 1 htb default 10 r2q 5 tc

Hello all, I am with a doubt about QoS solution... I have a 4 Mbit backbone coming from the telco I use... This is the link I serve to my clients, so I make this classes: $TC qdisc add dev $DL root handle 1: htb default 60 CLASS="/sbin/tc class add dev $DL parent" $CLASS 1: classid 1:1 htb rate 4096Kbit $CLASS 1:1 classid 1:10 htb rate 256Kbit ceil 3072Kbit burst 15k $CLASS 1:1

Hi everyone, My HTB script is showing me those "r2q change" warnings. I read that I should test with r2q values to gain accuracy and stop the warnings but I made some tests with r2q and with burst and I still get the warnings. Any ideas on this issue will be very helpful. The script seems to be working as the bandwidth for the IPs is being shaped. The NIC works at 100mbit and the

I wan to share internet to these 12 PCs. But my traffic control is not working. I''m using IP Masquerading to route internet to the LAN eth0 - LAN interface eth1 - Internet interface this is my firs htb script: #!/bin/bash tc qdisc del dev eth1 root handle 1: tc qdisc add dev eth1 root handle 1: htb default 30 tc class add dev eth1 parent 1: classid 1:1 htb rate 25kbps ceil 48kbps #tc

Hi all I am conducting the experiments comparing IP router forwarding delay and MPLS LSR forwarding delay, it is obvious in theory MPLS in Core should be faster than IP, but for small netork (only have several core routers), result show it is not, this is why I want emulate a large IP routing table in one core router. can I do it and how ? right now I use static routing table (by using command :

I have some problem with traffic shaping on debian testing. I actually posted a full config on the list a while ago but didn''t get any answers. The problem is that traffic doesn''t get into the user classes (~150) when I associate a class with a qdisc. I tried sfq, fifo but none works. If I dont''t associate a qdisc with a class classification occurs well.

Some time ago someone posted a nice script to monitor HTB classes, classmon.pl. A friend of mine ported it to CBQ, and attached is the result. Suggestions are welcome. Rubens > #!/usr/bin/perl > > # Classy CBQ Operations Monitor...in Perl > # Based on classmon.pl by Toby Cantor > # By BLFC > > # The following short command line options are parsed as you might expect. >

Hey, everyone, I am kindda newbie to this subject, so I just post my problem directly, please let me know if anything is wrong. in my config file when I use tc class add dev eth1 parent 1:11 classid 1:11016 htb rate 512kbit burst 10k everything works correctly but...when classid goes larger than 1:19999, eg: tc class add dev eth1 parent 1:21 classid 1:21006 htb rate

Hello! I have an internet connection of 64kbps garanteed in a channel of 256kbps. On this connection the metropolitan speed is 10Mbps and in the provider''s network the speed is 100Mbps. I have a few clients behind my linux box and i want to set up some limitations because some of them are using it irrational. I am marking the packets with 0 for internet; 1 for metropolitan 2 for

Yes sure here they are: The first one that i have received 2day and does not work almost at all: #!/bin/bash ETH_IN="eth1" ETH_OUT="eth0" BANDA_TOTALA="2Mbit" # pentru neclasificati ar trebui sa fie banda minima - 1k - aici ar trebui sa ajunga trafic necunoscut, # care nu e organizat in shape-uri BANDA_NECLASIFICATI="8kbit" #Shape generale /sbin/tc

Hey, I have such a script: tc qdisc add dev $DEV root handle 1:0 htb default 21 r2q 2 tc class add dev $DEV parent 1:0 classid 1:11 htb rate 100mbit tc class add dev $DEV parent 1:11 classid 1:21 htb rate 512kbit ceil 512kbit tc class add dev $DEV parent 1:11 classid 1:23 htb rate 1024kbit ceil 1024kbit tc class add dev $DEV parent 1:11 classid 1:25 htb rate 3072kbit

Hi, tc qdisc add dev eth0 root handle 1: htb tc class add dev eth0 parent 1:0 classid 1:1 htb rate 2000Kbit ceil 2000kbit tc class add dev eth0 parent 1:1 classid 1:2 htb rate 1200Kbit ceil 2000kbit tc class add dev eth0parent 1:1 classid 1:3 htb rate 800Kbit ceil 2000kbit tc class add dev eth0 parent 1:2 classid 1:21 htb rate 600Kbit ceil 2000kbit tc class add dev eth0 parent 1:2

Hello to all people there . Can i guarantee ICMP respond time no metter how loaded is internet line . i have typical NATed enviroiment like External IP |linux router| LAN - 192.168.0.0/24 i have example setup with IMQ but is it possible to be done also if i attache htb to eth0 and eth1 for example . if i start shaper ping i better that without shaper but it''s not guarantted i mean

Hi, I have some interesting problem with htb , I set up root class and sub-classess: $TC qdisc add dev eth0 root handle 1: htb $TC class add dev eth0 parent 1: classid 1:1 htb rate 1990kbit ceil 2000kbit $TC class add dev eth0 parent 1:1 classid 1:10 htb rate 190kbit ceil 200kbit $TC class add dev eth0 parent 1:1 classid 1:11 htb rate 1400kbit ceil 1600kbit $TC class add dev eth0 parent 1:1

Hi, good people! I wanted to limit my 4 customers to 144, 16, 32, and 32kbps. I used the following tc commands BUT IT FAILED TO LIMIT each and everyone of them to its bandwidth. What am I doing wrong: My tc scripts are: tc qdisc add dev eth1 root handle 1: htb default 1 #Classes# tc class add dev eth1 parent 1: classid 1:1 htb rate 9bps ceil 9bps #Default

Hello, I wrote a simple traffic shaping script (below) that should have allowed me to shape my internet traffic a bit (ppp0 - adsl 128kbit/64kbit; local interface eth0). The script works only partially - the speed is being limited but too much. Without running this script my download rate is about 10kBytes (with second computer also downloading at about 6kBytes). After running it my download speed

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have

Hello i''m having some issues trying to match packets using iptables mark, iproute filter and tc filter.- i mean, when i do iptables -t mangle -A INPUT -p tcp --dport 80 -j MARK --set-mark 20 iptables -t mangle -A PREROUTING -p tcp --dport 25 -j MARK --set-mark 10 iptables -t mangle -A FORWARD -p tcp -i eth0 -o eth1 --dport 25 -j MARK --set-mark 10 $TC qdisc del dev $INET_IFACE root $TC

Hello, its me again, I won''t stop sending emails to this list, until I solve this problem, I''ve tried several apps to create the right htb rules (even made them my self), but I always get the same results, traffic gets shaped, but I can''t use my bandwidth, and this is weird, because I should be able to, also I keep seeing download being limited too, and that

Hi,lartc I used iproute-060110 with iptables1.3.4 on gentoo 2005r1 kernel 2.6.14-5. I find some error messages in system logfile: HTB: quantum of class 10001 is big. Consider r2q change. HTB: quantum of class 10010 is big. Consider r2q change. tcf_action_init_1: successfull police HTB: quantum of class 20001 is big. Consider r2q change. HTB: quantum of class 20020 is big. Consider