search for: cjdwoodburi

Charles, We run everything as "root" :) However, we are using NUT 2.6.5. Are we missing something by running 2.6.5 rather then 2.7.1? If so, I can build/install 2.7.1. Thx chris Would On 2/4/14, 9:05 PM, Charles Lepple wrote: > On Feb 4, 2014, at 9:05 AM, Chris Duffy wrote: > >> ugen1.3: <USB UPS PPC> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON > [...]

Charles, the out from the command below as well as the system.log file are below your email. It does look like a permission issue but what one? Thx chris On 2/5/14, 6:43 PM, Charles Lepple wrote: > On Feb 5, 2014, at 10:12 AM, Chris Duffy wrote: > >> However, we are using NUT 2.6.5. >> >> Are we missing something by running 2.6.5 rather then >> 2.7.1? If so, I

Thx Charles, So since this is a new type of UPSonic UPS, do you think the vendor screwed up or is it just some quirk on Freebsd? Yes, if you can look into this I would appreciate it. I do not see anyone else on the Web attempting to use this new device yet.....but....... Regards chris On 2/6/14, 8:24 AM, Charles Lepple wrote: > On Feb 6, 2014, at 8:41 AM, Chris Duffy wrote: > >>

On 2/5/14, 9:55 PM, Charles Lepple wrote: > On Feb 5, 2014, at 9:03 PM, Chris Duffy wrote: > >>> Please run this: >>> >>> /usr/local/libexec/nut/blazer_usb -a UPSonic -u root -D >>> >>> and send the output back to the list. >>> >> Output from the above command: >> >> 0.000000 debug level is '1' >>

On Feb 5, 2014, at 10:12 AM, Chris Duffy wrote: > However, we are using NUT 2.6.5. > > Are we missing something by running 2.6.5 rather then > 2.7.1? If so, I can build/install 2.7.1. Well, 2.6.5 is from August 2012, so it's not the newest. And eventually, we would like people to switch to the shiny new nutdrv_qx driver which is in 2.7.1. But I'm pretty much guessing here

Charles, here is the command(s) output using uhidd.... # uhidd -v -u /dev/ugen1.3ugen1.3[0]-> HID interface ugen1.3[0]-> Report descriptor size = 27 ugen1.3[0]-> Kernel driver is active ugen1.3[0]-> kernel driver detached! ugen1.3[0]-> Find IN interrupt ep: 0x81 packet_size=0x8 # /usr/local/libexec/nut/blazer_usb -a UPSonic -u root -DDDD 0.000000 debug level is

On Feb 5, 2014, at 9:03 PM, Chris Duffy wrote: >> Please run this: >> >> /usr/local/libexec/nut/blazer_usb -a UPSonic -u root -D >> >> and send the output back to the list. >> > Output from the above command: > > 0.000000 debug level is '1' > 0.248714 Supported UPS detected with megatec protocol > 1.268575

On Feb 6, 2014, at 9:33 AM, Chris Duffy wrote: > So since this is a new type of UPSonic UPS, do you think > the vendor screwed up or is it just some quirk on Freebsd? It's a pretty fundamental design flaw, although it isn't uncommon among USB devices aimed at the Windows market, and to their credit, it does make implementation and deployment simpler on Windows. Neither the FreeBSD

On Feb 6, 2014, at 8:41 AM, Chris Duffy wrote: > 0.016485 Trying megatec protocol... > 0.017411 send: Q1 > 0.252545 read: (244.4 244.4 229.9 028 50.0 2.19 23.1 00000001 > 0.252589 Status read in 1 tries > 0.252602 Supported UPS detected with megatec protocol > 1.288032 send: Unknown error > 1.288085 Permissions problem: Input/output error

On Feb 4, 2014, at 9:05 AM, Chris Duffy wrote: > ugen1.3: <USB UPS PPC> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON [...] > idVendor = 0x06da > idProduct = 0x0005 This VID:PID combination should be handled by blazer_usb. In NUT 2.7.1 and later, this would be covered by nutdrv_qx as well. > I am running all the ups programs as root, i.e. "ps -aux" shows:

I am working with a number of our customers to ensure that NUT works with different UPS's on Freebsd 9.1. The current one I am looking is support for: *Upsonic Commercial UPS CXR 2000 - 2000VA/1200W - Rack/Tower* What seems to be supported in Freebsd is: CXR1000 blazer_ser LAN Saver 600 genericups upstype=0 Power Guardian genericups upstype=7 PrOffice 650 USB blazer_usb DS-800 USB

Charles, Here is the output: ugen1.3: <USB UPS PPC> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x06da idProduct = 0x0005 bcdDevice = 0x0003 iManufacturer = 0x0003 <PPC>