search for: cid_numb

...ssip=yes hasiax=yes hasmanager=no callwaiting=yes threewaycalling=yes callwaitingcallerid=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes callgroup=1 pickupgroup=1 host=dynamic localextenlength=0 allow_aliasextns=no allow_an_extns=no hasagent=no hasdirectory=no [250] callwaiting=yes cid_number= context=numberplan-custom-2 email= fullname=Winanjaya group= hasagent=yes hasdirectory=no hasiax=yes hasmanager=no hassip=yes hasvoicemail=yes host=dynamic mailbox=250 secret=1234 threewaycalling=yes vmsecret=1234 zapchan= registeriax=yes registersip=yes canreinvite=no nat=no dtmfmode=rfc2833 di...

Are these both caller id presentation related? If not, which on is currently being used. Finally, is there a "latest" sip_peers table structure to use with 1.8, without the obvious hacks, deprecations. and redundancies? Thanks in Advance, Nick.

...d it - it is because it is being recorded in the CDR while in a macro (as below). Is there any work around so that I can record the actual dialed number? [macro-dialout] exten = s,1,Set(TOUCH_MONITOR=${TIMESTAMP}_${CALLERID(num)}-${ARG1}) exten = s,n,NoOp(CID_NAME : ${CID_NAME}) exten = s,n,NoOp(CID_NUMBER: ${CID_NUMBER}) exten = s,n,NoOp(CID_CLIR : ${CID_CLIR}) exten = s,n,NoOp(TRUNK : ${TRUNK}) exten = s,n,Set(CALLERID(name)=${CID_NAME}) exten = s,n,Set(CALLERID(num)=${CID_NUMBER}) exten = s,n,Set(PRESENTATION=${IF($["${CID_CLIR}"="1"]?prohib_not_screened:allowed_not_scre...

...ut of "sip show peers" shows the context correctly, but when I try to make a call, using that peer, I can only dial the numbers set in the "default" context. Please, could anyone help me resolve this. Thanks in advance. This is a part of users.conf [951XXXXXX] callwaiting = yes cid_number = 951XXXXXX context = numberplan-custom-1 email = fullname = New User group = hasagent = no hasdirectory = no hasiax = no hasmanager = no hassip = yes hasvoicemail = yes host = dynamic mailbox = 951XXXXXX secret = 000000 threewaycalling = yes vmsecret = 1234 zapchan = registeriax = no registersip...

...sterisk,voicemail --------- - Mysqldump from iaxfriends --------- INSERT INTO iaxfriends (name,type,phonenumber,username,mailbox,secret,dbsecret,context,regcontext,host,ipaddr,port,defaultip,sourceaddress,mask,regexten,regseconds,accountcode,mohinterpret,mohsuggest,inkeys,outkey,language,callerid,cid_number,sendani,fullname,trunk,auth,maxauthreq,requirecalltoken,encryption,transfer,jitterbuffer,forcejitterbuffer,disallow,allow,codecpriority,qualify,qualifysmoothing,qualifyfreqok,qualifyfreqnotok,timezone,adsi,amaflags,setvar) VALUES ('admin.my.domain','friend','100','admi...

...e much of them. (for example for a while i was getting host=dynamic not found/known errors. then i was getting something about disallow errors, now i dont receive any errors but when i turn on sip debugging it just say unauthorized. below is my users.conf file [6058] allow = all callwaiting = yes cid_number = 6058 context = default email = user@mydomain.com fullname = Bob smith group = hasagent = yes hasdirectory = yes hasiax = no hasmanager = no hassip = yes hasvoicemail = yes host=dynamic mailbox = 6058 secret = myPassword threewaycalling = yes vmsecret = 1337 zapchan = registeriax = no registersi...

...[featuremap] blindxfer => # ; Blind transfer ;disconnect => *0 ; Disconnect ;automon => *1 ; One Touch Record (a.k.a. Touch Monitor) atxfer => * ; A users.conf: [6004] fullname = Analog User 4 secret = 6004 email = cid_number = zapchan = 4 context = numberplan-local hasvoicemail = yes hasdirectory = yes hassip = no hasiax = no hasmanager = no callwaiting = no threewaycalling = no mailbox = 6004 hasagent = no group = 2

...rid: NULL amaflags: NULL videosupport: no maxcallbitrate: NULL mailbox: NULL regexten: NULL fromdomain: testers.com fromuser: NULL qualify: NULL defaultip: NULL outboundproxy: PU.BL.IC.IP contactpermit: NULL contactdeny: NULL fullname: NULL cid_number: NULL callingpres: NULL mohinterpret: NULL mohsuggest: NULL hasvoicemail: NULL subscribemwi: NULL vmexten: NULL rtpkeepalive: NULL directrtpsetup: yes dtlsenable: yes dtlsverify: no dtlsprivatekey: /etc/asterisk/keys/asterisk.pem dtlssetup: actpass dtlscertfil...

...callerid: NULL amaflags: NULL videosupport: no maxcallbitrate: NULL mailbox: NULL regexten: NULL fromdomain: testers.com fromuser: 660 qualify: NULL defaultip: NULL outboundproxy: 1.1.1.1 contactpermit: NULL contactdeny: NULL fullname: NULL cid_number: NULL callingpres: NULL mohinterpret: NULL mohsuggest: NULL hasvoicemail: NULL subscribemwi: NULL vmexten: NULL rtpkeepalive: NULL directrtpsetup: yes dtlsenable: yes dtlsverify: no dtlsprivatekey: /etc/asterisk/keys/asterisk.pem dtlssetup: actpass dtlscertfil...

...svn)******* [trunk_1] allow = all context = DID_trunk_1 dialformat = ${EXTEN:1} hasexten = no hasiax = yes hassip = no host = iax2.fwdnet.net port = 4569 registeriax = yes registersip = no secret = rycort4e trunkname = Custom - fwd trunkstyle = customvoip username = 788694 [6000] callwaiting = yes cid_number = 6000 fullname = proton hasagent = yes hasdirectory = no hasiax = no hasmanager = no hassip = yes hasvoicemail = yes host = dynamic mailbox = 6000 secret = proton threewaycalling = yes vmsecret = 1234 registeriax = no registersip = yes canreinvite = yes nat = no dtmfmode = inband disallow = all...

...timerb: NULL qualifyfreq: NULL constantssrc: NULL contactpermit: NULL contactdeny: NULL usereqphone: NULL textsupport: NULL faxdetect: NULL buggymwi: NULL auth: NULL fullname: NULL trunkname: NULL cid_number: NULL callingpres: NULL mohinterpret: NULL mohsuggest: NULL parkinglot: NULL hasvoicemail: NULL subscribemwi: NULL vmexten: NULL autoframing: NULL rtpkeepalive: NULL call-limit: NULL g726nonstandard: NULL ignoresdpversi...

...", "TOUCH_MONITOR=20070827-224353_0031247110570-247110358") in new stack -- Executing NoOp("Local/247110358 at DefaultOutgoingRule-aa84,2", "CID_NAME : Katie") in new stack -- Executing NoOp("Local/247110358 at DefaultOutgoingRule-aa84,2", "CID_NUMBER: 0031247110460") in new stack -- Executing NoOp("Local/247110358 at DefaultOutgoingRule-aa84,2", "CID_CLIR : 0") in new stack -- Executing NoOp("Local/247110358 at DefaultOutgoingRule-aa84,2", "TRUNK : SIP/31247110460") in new stack --...

Hello everyone, I have previously asked this question on the asterisk-video list, but I got directed here. I have a setup consisting of asterisknow beta4 (not sure if that is crucial) and a few clients all running X-Lite 3.0 (not eyebeam) on the local network. My computer has a USB-Camera installed, and now I would like to do some video calling with it, at least, so that the other user can

...y = no reportholdtime = yes musicclass = default member => Agent/60010 member => Agent/60011 member => Agent/60014 but not register into agent.conf is emply extension.conf exten = 66666,1,Answer() exten = 66666,2,Queue(${EXTEN}) and users.conf with users.conf [60011] callwaiting = yes cid_number = 60011 context = numberplan-custom-2 fullname = Roberto Bolivar Casa hasagent = yes hasdirectory = no hasiax = no hasmanager = no hassip = yes hasvoicemail = yes deletevoicemail = no host = dynamic mailbox = 60011 secret = 123654 threewaycalling = yes vmsecret = 1234 registeriax = no registersip...

Hello, I'm having an issue with caller ID in voicemail that I'd appreciate any input on. I have two sip peers defined as extension 100 and 101 each with separate voicemail accounts. Each sip peer has its own DID number, which is established via cid_number = 6021231234. When a call is placed from SIP peer #100 to SIP peer #101, and SIP peer #101 wants to reply to #100's voicemail via the option #3 advanced options menu, * responds with an error that #100 does not have a voicemailbox. Of course * thinks the voicemailbox = the caller ID...

...https://wiki.asterisk.org/wiki/display/AST/SIP+Realtime,+MySQL+table+structure But it seems that it is not as per the Asterisk 1.8 SIP options. i.e. it contains 'call-limit' which is deprecated in 1.8 and not the 'callcounter' as one of the fields. Pardon my ignorance, but are 'cid_number','trunkname','fullname' from given link sip parameters to be set? sip.conf has no such entries. I also looked at .../contrib/realtime/mysql, and didn't find 'callcounter' in sipfriends.sql. I also couldn't find tables for queue and queue members in it. Yes, I...

Can someone tell me how to setup a Aastra 75i phone? I have been trying to set it up and have pointed it to our asterisk server and selected http for download. What is the path? I have created two extension in asterisk for testing. I can't even get the phones to call each other. _________________________________________________________________ Lauren found her dream laptop. Find the PC that?s

...:A6:0B:E7:50] model = symmetric host = 192.168.1.103 inkey = asreg outkey = asnow include = priv ;all permit = priv qualify = yes order = primary SIP.CONF ---------------- [priv] type=user dbsecret=dundi/secret context=dundi-priv-local USERS.CONF ----------------------- [6000] callwaiting = yes cid_number = 6000 context = email = tverscheure@gmail.com fullname = Tim group = hasagent = yes hasdirectory = yes hasiax = no hasmanager = no hassip = yes hasvoicemail = yes host = dynamic mailbox = 6000 secret = 1234 threewaycalling = yes vmsecret = 12 zapchan = registeriax = no registersip = yes [6001]...

...gt; n,Set(LOCATION=${CUT(CHANNEL,/,2)}) same => n,Set(LOCATION=${CUT(LOCATION,-,1)}) same => n,Set(WHO=${HOTDESK_PHONE_STATUS(${LOCATION})}) same => n,GotoIf($[${ISNULL(${WHO})}]?internal,${EXTEN},1) same => n,Set(${WHO}_CID_NAME=${HOTDESK_INFO(cid_name,${WHO})}) same => n,Set(${WHO}_CID_NUMBER=${HOTDESK_INFO(cid_number,${WHO})}) same => n,Set(${WHO}_OUTBOUND_PERMISSION=${HOTDESK_INFO(permissions,${WHO})}) same => n,Gosub(blf-begincall,s,1(${WHO},INUSE)) same => n,Set(CALLERID(name)=${${WHO}_CID_NAME}) same => n,Set(CALLERID(num)=${${WHO}_CID_NUMBER}) same => n,Goto(users...

...ost imapfolder = INBOX authuser = asterisk authpassword = xxxxxxx maxgreet = 360 operator = yes maxmessage = 300 minmessage = 4 saycid = no sayduration = no envelope = no review = yes users.conf (a typical user): [02] username = 02 transfer = yes mailbox = 02 call-limit = 100 fullname = Test User cid_number = 02 context = DLPN_MainUsers hasvoicemail = yes vmsecret = xxxxxxx email = imapuser = allison hassip = yes hasiax = no host = dynamic nat = no hasdirectory = yes dtmfmode = rfc2833 threewaycalling = no callwaiting = no hasmanager = no hasagent = no canreinvite = no insecure = no pickupgroup = au...