search for: cd0

...config 1, EHCI root hub(0x0000), NEC(0x0000), rev 1.00 port 1 powered port 2 addr 2: high speed, self powered, config 1, USB TO IDE(0x0701), vendor 0x05e3(0x05e3), rev 0.33 Mar 22 13:17:12 tarkhil kernel: umass0: vendor 0x05e3 USB TO IDE, rev 2.00/0.33, addr 2 Mar 22 13:17:14 tarkhil kernel: cd0 at umass-sim0 bus 0 target 0 lun 0 Mar 22 13:17:14 tarkhil kernel: cd0: <_NEC CDRW/DVD CB1100B NS00> Removable CD-ROM SCSI-0 device Mar 22 13:17:14 tarkhil kernel: cd0: 40.000MB/s transfers Mar 22 13:17:14 tarkhil kernel: cd0: Attempt to query device size failed: NOT READY, Medium not prese...

Is there anyone out there who has installed FreeBSD on the above Sony laptop ? Both ''cat filename > /dev/dsp0.0'' or ''vlc cdda:///dev/acd0@1 are OK. If I run ''cdcontrol -f /dev/acd0 play'', there is no sound. But the output of ''cdcontrol -f /dev/acd0 status audio'' is alright. (same behaviour for cd0 instead of acd0) And the output of ''mplayer cdda://1//dev/acd0'' is: Playing cdda:...

Hello, I've an SCSI version of the IOMEGA REV drive (35 GB, like ZIP drive). How can I access this drive. FreeBSD detects the drive as CDROM: cd0 at ahc0 bus 0 target 4 lun 0 cd0: <Iomega RRD 89.B> Removable CD-ROM SCSI-4 device cd0: 20.000MB/s transfers (10.000MHz, offset 8, 16bit) cd0: cd present [17090880 x 2048 byte records] I'm using FreeBSD 6.1-RC. Kind regards, Thomas.

...ed from 9.2-STABLE to 10.0-PRERELEASE #0 r259144 last night and I am now getting this every 2 seconds in /var/log/messages: Dec 10 07:54:31 Shop kernel: ata1: FAILURE - zero length DMA transfer attempted Dec 10 07:54:31 Shop kernel: ata1: setting up DMA failed cat /var/log/messages | grep ata1: cd0 at ata1 bus 0 scbus3 target 0 lun 0 cd0: <TSSTcorp DVD-ROM TS-H352C DE02> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed cd1 at ata1 bus 0 scbus3 target 1 lun...

Hi, just noticed that I can't mount anything anymore on the cd[01]a devices anymore. The cd[01]c devices work correctly, as does the acd[01]a device. These are an ATAPI dvd writer (cd0) and a dvd player(cd1) trough cam(4). This applies to both dvd and cd media. Remaking the device through MAKEDEV has no influence. Nothing reported by dmesg. root@ghost ~ # mount_cd9660 /dev/cd1a /mnt mount_cd9660: /dev/cd1a: Invalid argument root@ghost ~ # mount_cd9660 /dev/acd1a /mnt...

...w), I'm getting the message buffer filled by errors. This is my dvd-rw $ sysctl dev.acd.0.%desc dev.acd.0.%desc: PIONEER DVD-RW DVR-109/1.58 attached to $ sysctl dev.atapci.1.%desc dev.atapci.1.%desc: VIA 8237A UDMA133 controller And the followings are some examples of the error: g_vfs_done():cd0[READ(offset=3533693165190270976, length=2048)]error = 5 g_vfs_done():cd0[READ(offset=8751655366962446336, length=2048)]error = 5 g_vfs_done():cd0[READ(offset=8751655370713257984, length=2048)]error = 5 g_vfs_done():acd0[READ(offset=3533693165190270976, length=2048)]error = 5 g_vfs_done():acd0[READ...

...rs: 255H 63S/T 2231C) da1 at ahc0 bus 0 target 6 lun 0 da1: <IBM DDYS-T09170N S80D> Fixed Direct Access SCSI-3 device da1: 80.000MB/s transfers (40.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) Mounting root from ufs:/dev/da0s1a (cd0:ahc0:0:3:0): SCB 0x9 - timed out >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<< ahc0: Dumping Card State in Data-in phase, at SEQADDR 0x1b1 Card was paused ACCUM = 0x40, SINDEX =...

When ever I try try to mount any burned CD/DVD media I get the error below. mount_cd9660 -v /dev/cd0 /mnt using starting sector 0 mount_cd9660: /dev/cd0: Input/output error Exit 1 Which in dmesg results in... g_vfs_done():cd0[READ(offset=-2207623839744, length=2048)]error = 5 This is odd because if I unplug the USB CD drive and plug it into my netbook running a old RELENG 7.0-STABLE it works. O...

...0 intpin 2 IPsec: Initialized Security Association Processing. Waiting 15 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! sa0 at ahc2 bus 0 target 6 lun 0 sa0: <HP HP35470A T603> Removable Sequential Access SCSI-2 device sa0: 3.300MB/s transfers Mounting root from ufs:/dev/da0s1a cd0 at ahc2 bus 0 target 4 lun 0 cd0: <PLEXTOR CD-ROM PX-40TS 1.13> Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed da0 at ahc0 bus 0 target 0 lun 0 da0: <WDIGTL WDE9180 ULTRA2 1.30> Fixed Direct...

My backup script split filesystem dumps to files with size of 4,37 GB (4 588 544 kB). It's just an optimal size to fill out DVDs. At this moment I have to burn them from windows via smb-link becuase I didn't manage to do this task from FreeBSD console due to 2GB/4GB filesize restrictions (growisofs). I'm using freeware CDBurnerXP to burn my backups (ISO9660/UDF/Joliet), and they

...sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fdc0: No FDOUT register! Timecounters tick every 10.000 msec xenbusb_front0: <Xen Frontend Devices> on xenstore0 cd0 at ata1 bus 0 scbus1 target 0 lun 0 cd0: <QEMU QEMU DVD-ROM 0.10> Removable CD-ROM SCSI-0 device cd0: 16.700MB/s transfers (WDMA2, ATAPI 12bytes, PIO 65534bytes) cd0: cd present [360385 x 2048 byte records] xn0: <Virtual Network Interface> at device/vif/0 on xenbusb_front0 xn0: Ethernet...

...; irq 17 at device 28.4 on pci0 pci2: <ACPI PCI bus> on pcib2 atapci0: <JMicron JMB368 UDMA133 controller> port 0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f irq 16 at device 0.0 on pci2 atapci0: [ITHREAD] ata2: <ATA channel 0> on atapci0 ata2: [ITHREAD] acd0: DVDR <HL-DT-STDVD-RAM GH22LP20/1.02> at ata2-master UDMA66 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 cd0 at ata2 bus 0 target 0 lun 0 cd0: <HL-DT-ST DVD-RAM GH22LP20 1.02> Removable CD-ROM SCSI-0 device cd0:...

...ddr 2> on uhub0 ums0: 3 buttons and Z dir. Timecounter "TSC" frequency 1694512861 Hz quality 800 Timecounters tick every 1.000 msec firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) ad0: 57231MB <HTE726060M9AT00 MH4OA6AA> at ata0-master UDMA100 acd0: DVDR <QSI DVD+/-RW SDW-082/LX32> at ata1-master UDMA33 acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 cd0 at ata1 bus 0 target 0 lun 0 cd0: <QSI DVD+-RW SDW-082 LX32> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: Attempt to query device size failed: NOT RE...

...ed1: Ethernet address: 00:e0:29:7d:84:0b ed1: type RTL8019 (16 bit) Timecounter "TSC" frequency 119752915 Hz quality 800 Timecounters tick every 10.000 msec ad0: 408MB <Seagate ST3491A 07.07.01> at ata0-master WDMA1 ad2: 76351MB <SAMSUNG SP0802N TK100-24> at ata1-master WDMA2 acd0: CDROM <MATSHITA CR-588/LS13> at ata1-slave PIO4 Waiting 5 seconds for SCSI devices to settle da0 at ahc0 bus 0 target 0 lun 0 da0: <CONNER CFP1080S 4649> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled da0: 1030MB (2110812 512...

Hi, whenever I want to mount a DVD-RAM, I have a little problem because the corresponding device entry (eg cd0a, acd0a) does not exist. This will be created after trying to mount /dev/cd0 instead of /dev/cd0a, but I am not sure if this is the correct behaviour ;-) # ls /dev/acd* /dev/acd0 /dev/acd1 # mount /dev/acd0 /home/hk/mnt/ mount: /dev/acd0 on /usr/home/hk/mnt: incorrect super block ls /dev/...

Hello, I am creating a domU with Ubuntu12.04, I need to provide dom0''s certain ioports(0xcd0-0xcdb) to domU. I have added *ioports = [ "cd0-cdb" ] *and tried it in the domU, its been not mapped on domU. On host I am using xen-4.2 and tool stack xl. Let me know if I have to add anymore information to config file to grant access to domU _____________________________________...

i trust i am still new in freebsd, after go through all mail and book, = now seem to be more close, i got 3 server and a notebook to play with, = install no problem. cvsup not problem.make buildworld not problem. make = build kernel become,every machine i got different error code 1,=20 1-one got system full=20 2-one showing this sometime=20 > anyone know the best way to be one time success,not

...sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0% ad0: 9671MB <IBM-DTTA-351010> [19650/16/63] at ata0-master UDMA33 acd0: CD-RW <PLEXTOR CD-R PX-W1210A> at ata1-master WDMA2 Mounting root from ufs:/dev/ad0s1a cd0 at ata1 bus 0 target 0 lun 0 cd0: <PLEXTOR CD-R PX-W1210A 1.08> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: cd present [87508 x 2048 byte records]

....00, addr 2 uhub5: 3 ports with 2 removable, bus powered ukbd0: Chicony PFU-65 USB Keyboard, rev 1.10/1.00, addr 3, iclass 3/1 kbd2 at ukbd0 ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 4, iclass 3/1 ums0: 5 buttons and Z dir. Timecounters tick every 1.000 msec acd0: DVDR <PLEXTOR DVDR PX-740A/1.01> at ata0-master UDMA33 ad4: 286168MB <Seagate ST3300622AS 3.AAE> at ata2-master SATA150 ad6: 286168MB <Seagate ST3300622AS 3.AAE> at ata3-master SATA150 GEOM_MIRROR: Device gm0s1 created (id=3185843744). GEOM_MIRROR: Device gm0s1: provider ad4s1 de...

...MB/s transfers (20.000MHz, offset 31, 16bit) ch0 at sym1 bus 0 target 5 lun 1 ch0: <HP C5713A H910> Removable Changer SCSI-2 device ch0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit) ch0: 6 slots, 1 drive, 0 pickers, 0 portals SMP: AP CPU #1 Launched! Mounting root from ufs:/dev/amrd0s1a cd0 at sym0 bus 0 target 3 lun 0 cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device cd0: 20.000MB/s transfers (20.000MHz, offset 16) cd0: Attempt to query device size failed: NOT READY, Medium not present ======================== KERNEL config file ======================== machine...