search for: cat6

...split the data in 2 parts, 1 and 2. Each part has data belonging to 6 different categories, and each category has 2 different classes, these classes being the same for each category. The classes are called "land" and "water" and each category is labeled "cat1" to "cat6". I am using the command (function) table to tabulate each class for each category, but since i split the data in 2 parts, one part has only some of the 6 categories, and the other some other of the 6 categories (and not necessarily exclusive). So let's built some results after i used the...

...ext few days, i'm wondering this: Is it over-engineering to seek out 550mhz rated cables over the typical Cat 6 250mhz rated cables? I've been advised (if you can a salesperson's words advice, heh.) that 250mhz is enough to handle traffic up to 10GB's. Should I just be happy with Cat6 for my GB switches or is is worth getting more into the details and seeking 550mhz-rated cable? Just curious what your experience is in migrating away from the typical 10/100 cables of yore to the spiffier world of gb rated traffic. -karlski __________________________________________________ D...

...ill having network problems b) if all of your dovecot tests is on one host ... disconnect it from the network and see if dovecot's auth finishes its tasks c) to clean up your network ... - use switches ... not hubs .... even inexpensive netgear switches is good enuff - use good 3-6' cat6e cables ... we'll assume the bldg's wiring is done to bldg specs - my guess, you're probably having cabling problems ) - separate slow devices from faster devices eg. separate printers onto its own network with a switch in between printers and everybody else - separate 10/100 d...

...s". At that point, ping from the destination box to the router fails. I then deactivate the net interface on the destination box and then activate it. Ping is then successful, and the transfer is completed. The transferred file is correct, as verified with sha1sum. All connections are via cat6 wire. So what do you think? Should I try changing the net card? Any tests to run? Any other suggestions? Thanks for your help. Mike.

please can someone send to me his files like zaptel & zapta if he si using TE110P thank you

Hello, on an x64 ubuntu 15.10 desktop tinc 1.0.26 sometimes crashes on startup of the machine. eth0 (via good old cat6 cable, no wireless) is configured to use dhcp. The crash does not happen often, I have seen it in total maybe 2 or 3 times since installing 15.10 while it was still in alpha ( July 2015 ) until today. The desktop is not shut down very often, maybe once a week or every two weeks or even in longer in...

I have to provision several dozen * users to a seperate building on our campus in the same subnet. Ordinarily, I'd just run a gigabit cat6 cable to another switch if it doesn't violate the 100 metre rule, but this building is several hundred metres away from my backbone. My only option for cabling to the remote building is copper. My plan is to provision them with a Linux bridge with 4 NIC's: 1 gigabit to the backbone, and thr...

Thanks for your tip regarding the busy network. I am using a one year old Cisco Catalyst 2960S (WS-C2960S-48TD-L) with cat6e cables and my network should not be overloaded as far as I know. My mailbox and mail proxy servers are on two different virtual machines on two different servers. It could be possible that it is something with the virtualization but my other VMs do not have any connection time outs or anything. I...

I've been tasked with fitting out an appartment building with a phone system. The entire appartment is getting broadband, with Cat6 Cables into each appartment and fibre down the trunk. I was hoping to have PSTN in the basement connecting to the IP system. Today I found out however that one of the services will be paid TV - and it will need a PSTN backchannel - ie a modem. The set top devices don't support IP, they hav...

...to use the standard MTU of 1514/1500. I see the same behavior even if I take the switch out of the system and connect the Windows XP and Linux machines directly to each other (crossover cable not required for computer-to-computer connection with these NICs -- and by the way all of my cables are CAT6). On the Linux side, I am using Samba 3.0.0 on Mandrake Linux 9.2 with all of Mandrake's current updates -- kernel = 2.4.22-21enterprisemdk. The Linux machine is a P4-3.06 Ghz with 1 GB of RAM -- running in hyperthreading mode. I am wondering if any of the Samba socket options settings li...

I've got a Dell Precision Workstation 490 with 64-bit Centos 5, fully updated, with an on-board Broadcom 57xx gigabit Ethernet controller, updated BIOS, 1 GB switch, and /var/log/messages and dmesg both claim the link is 100 Mb, not 1 GB. I tried setting eth0 to mtu 9000 but got an error in going so. What do I need to do to have the card see 1 gb? Thanks. Scott

Hi All, Need some information on getting the right storage array to buy for my cluster configuration can anyone help me with this my Setup so far 2 Athlon 2800 Sempron System 1 Wti Network power switch 1 24 Port 10/100 Cat5 switch 2 Adaptec 39160 scsi host adapter pci cards installed in the systems. I need to know what is the best storage solution with this configuration Thanks

Hi all, I have two prodction servers with FreeBSD 5.4 (all security patches are applied). They running some services like dns, ssh, http, ftp, etc. But I woukd like to encrypt some services for some hosts with ipsec when it is accessed. For example: - DNS resolution: not encrypted. - DNS replication master-slave: encrypted by ipsec. - Telnet: encrypted by ipsec for some hosts. Deny

On Fri, Jan 22, 2016 at 01:32:08PM +0100, Maximilian H. wrote: > on an x64 ubuntu 15.10 desktop tinc 1.0.26 sometimes crashes on startup > of the machine. eth0 (via good old cat6 cable, no wireless) is > configured to use dhcp. The crash does not happen often, I have seen it > in total maybe 2 or 3 times since installing 15.10 while it was still in > alpha ( July 2015 ) until today. The desktop is not shut down very > often, maybe once a week or every two weeks...

In the next few months I'll be moving and will have a room specifically for my office. As part of this move, I'll be putting in cat5e or cat6 throughout the new location and extra phone pairs. I'll want to replace my Talkworks/WinfaxPro based voicemail system with an Asterisk system, so what do I need to do cabling wise to make best use of Asterisk? I'll have at 2 phone lines coming into, one personal and one business, and...

...ving transfer performance issues from various clients to my new file server : Server config is : Athlon 3200+ on Nforce 2 Yukon Gb NIC Gentoo with 2.6.9 samba 3.0.7-r1 ebuild 3Ware Escalade 9500S-12 x 2 Clients are XP SP2,2K3 on similar hardware and G5s with OS X 10.3, all with Gb NICs on Cat6, and all of which are transferring like dogs ;( smbmount from server to 2003Server transfers ok, but one directory with ~2500 files appears as empty! Also, my old G4 w/Os X 10.2 is transferring ok also... go figure. # hdapram -t /dev/sda1 /dev/sda1: Timing buffered disk reads: 268 MB i...

Hi, I have a dataset with 6 categorical variables. I have used this following code to make the variables u1-u6 ordered factors and this works well. cat1cat2 cat3 cat4 cat5 cat6 ? 0 ? ?? 1 ? ? 1????? 0 ??? 0? ?? 1 ? 1 ? ?? 1 ? ? 0 ? ?? 0 ? ? 0 ? ? 0 ....... .... ############ data<-read,table("example.txt") data <- as.data.frame(lapply(data, ordered)) ############ Now, suppose I have bigger dataset where some variables are categorical (cat) and others...

anyone know how to force network cards talk at gig speeds when all it wants to do is establish a connection at 100mbits root at host1 [/backup/cpbackup/daily]# mii-tool eth0: negotiated 100baseTx-FD, link ok eth1: negotiated 100baseTx-FD flow-control, link ok 01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express (rev 11) Subsystem: Broadcom

Hi all, i am trying to setup my first t1 in asterisk, i have been using asterisk for several years but ahve never needed a t1 line before. I have a sangoma card already in the server with 4fxo ports. Now i ordered two single port t1 line cards from sangoma for the two servers i am connecting with the point 2 point t1. I am currently at the location trying to set things up but have some

I'm having issues with echo. My setup is Polycom IP501 phones connected to an Adit 600 via T100P. 13 Lines going to the Adit. All echo so far is on the local side (Employees hears own voice, but only on some calls). Watching the channel with ztmonitor, I notice that TXGAIN is pegged out most of the time. RXGAIN is anywhere between 45 and 60%. Is it safe to assume that playing around