search for: callref

...01 993251: Dec 16 14:53:12: ISDN Se7/0:1:23 Q931: Applying typeplan for sw-type 0x2 is 0x2 0x1, Calling num 5554444 993252: Dec 16 14:53:12: ISDN Se7/0:1:23 Q931: Applying typeplan for sw-type 0x2 is 0x2 0x1, Called num 3146519590 993253: Dec 16 14:53:12: ISDN Se7/0:1:23 Q931: TX -> SETUP pd = 8 callref = 0x00F3 Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98397 Exclusive, Channel 23 Net Specific...

...ent or fastbusy. Below is captured ISDN debug from Cisco. It's sending ALERT (progress indicator 8), but I am not sure why * is not relaying that signal to the ATA. I hope someone is out there to help me on this. Thanks in advance. Jan 15 22:53:24: ISDN Se1/0:23: TX -> SETUP pd = 8 callref = 0x0078 Jan 15 22:53:24: Sending Complete Jan 15 22:53:24: Bearer Capability i = 0x8090A2 Jan 15 22:53:24: Channel ID i = 0xA98397 Jan 15 22:53:24: Calling Party Number i = 0x0081, '6882332', Plan:Unknown, Type:Unknown Jan 15 22:53:24: Called Party N...

...x.xxx:1720 1:13.014 ThreadID=0x0004c013 H323 Attempt to use invalid URL "033283077731@xx.xxx.xx.xxx:1720" 1:13.014 ThreadID=0x0004c013 H323 Could not parse "033283077731@xx.xxx.xx.xxx:1720" 1:13.021 H225 Answer:80db018 H225 Reading PDUs: callRef=4422 1:13.026 ClearCallT...d:08127268 H225 Sending release complete PDU: callRef=4422 1:13.031 H225 Answer:80db018 H225 Read error (4): Interrupted system call 1:13.033 H225 Answer:80db018 H225 Signal channel closed. 1:13.046 H323 Cleaner H323...

Hello All, I am trying to setup a SIP to H323 system using SER, Asterisk And GnuGK. Following is the configuration: CISCO ATA (NAT) -> SER -> ASTERISK -> GNUGK My Cisco ATA is registered with SER and When I dial a number, SER forwards the call to Asterisk, and Asterisk forwards the call to the GateKeper. This is ok, call reaches the gatekeeper, however the gatekeeper drops the call

Hi, In our office, we're slowly migrating from a cisco call manager set up to asterisk. Problem is management doesn't want to buy any other hardware ?as they had already invested a lot in cisco. The main cause of this is asterisk's added features like unique FAX number for everyone in the company (which will be the same as phone DID), Voice mail, Auto Answer etc yet we need thousands

...H225 Caller:80f1490 LID Created codec: pt=G729, bytes=10, samples=80 2:21.336 H225 Caller:80f1490 H225 Built fastStart for G.729{hw} <1> 2:21.338 H225 Caller:80f1490 H225 Sending PDU: setup 2:21.338 H225 Caller:80f1490 H225 Reading PDUs: callRef=23866 2:21.398 H225 Caller:80f1490 H225 Receiving PDU: releaseComplete 2:21.398 H225 Caller:80f1490 H225 Handling PDU: ReleaseComplete callRef=23866 2:21.399 H225 Caller:80f1490 H225 Set protocol version to 4 and implying H.245 version 7 2:21.399...

...fifo cnt 31 02 FF 03 08 01 03 05 A1 04 03 80 90 A3 18 01 8A 70 09 C1 39 36 39 34 31 31 30 30 7D 02 91 81 29:45.87 Card1 <- PH_DATA: UI[0]C (sapi 0, tei 127) HEX: 02 FF 03 08 01 03 05 A1 04 03 80 90 A3 18 01 8A 70 09 C1 39 36 39 34 31 31 30 30 7D 02 91 81 29:45.87 frame network->user broadcast callref 3 caller size 28 message type SETUP Sending complete Bearer capability octet 3 10000000 octet 4 10010000 octet 5 10100011 Channel identification octet 3 10001010 Called party number octet 3 11000001 number digits 96941100 High layer compatibility octet 3 10...

...Caller:834f9d0 h323pdu.cxx(494) H245 Sending PDU: request masterSlaveDetermination { terminalType = 50 statusDeterminationNumber = 4068038 } 1:21:35.143 H225 Caller:834f9d0 h323pdu.cxx(494) H225 Sending PDU: { q931pdu = { protocolDiscriminator = 8 callReference = 8176 from = originator messageType = Setup IE: Bearer-Capability = { 80 90 a5 ... } IE: Display = { 75 6e 6b 6e 6f 77 6e 00 unknown. } IE: User-User = { 20...

...E[3777] chan_zap.c: PRI got event: HDLC Abort (6) on Primary D-channel of span 3 Oct 25 10:27:25 DEBUG[3777] chan_zap.c: Got event HDLC Abort (6) on D-channel for span 3 *The ISDN Messages on the IAD when the call is flashed* *Mar 3 15:47:58 EST: ISDN Se1/0:23 Q931: RX <- DISCONNECT pd = 8 callref = 0x0057 Cause i = 0x8190 - Normal call clearing *Mar 3 15:47:58 EST: %ISDN-6-DISCONNECT: Interface Serial1/0:0 disconnected from 6782363001 , call lasted 31 seconds *Mar 3 15:47:58 EST: ISDN Se1/0:23 Q931: TX -> RELEASE pd = 8 callref = 0x8057 *Mar 3 15:47:58 EST: ISDN Se1/0:23 Q931...

...ed incoming call thread 5:37.445 H225 Answer:9cc1250 transports.cxx(1127) H225 Awaiting first PDU 5:37.470 H225 Answer:9cc1250 h323pdu.cxx(517) H225 Receiving PDU: setup 5:37.471 H225 Answer:9cc1250 transports.cxx(1136) H225 Incoming call, first PDU: callReference=27042 5:37.471 H225 Answer:9cc1250 h323caps.cxx(1942) H323 Added capability: UserInput/hookflash <1> 5:37.472 H225 Answer:9cc1250 h323caps.cxx(1942) H323 Added capability: UserInput/RFC2833 <2> 5:37.472 H225 Answer:9cc1250 h323caps...

...Determination 0:16.993 H225 Caller:9fdc730 h323pdu.cxx(494) H245 Sending PDU: request masterSlaveDetermination 0:16.995 H225 Caller:9fdc730 h323pdu.cxx(494) H225 Sending PDU: setup 0:16.996 H225 Caller:9fdc730 h323.cxx(1591) H225 Reading PDUs: callRef=29016 0:17.159 H225 Caller:9fdc730 h323pdu.cxx(494) H225 Receiving PDU: callProceeding 0:17.160 H225 Caller:9fdc730 h323.cxx(1644) H225 Handling PDU: CallProceeding callRef=29016 0:17.161 H225 Caller:9fdc730 h323neg.cxx(334) H245 Stopping Mast...

...oming call thread 0:26.011 H225 Answer:40419ae0 transports.cxx(984) H225 Awaiting first PDU 0:26.029 H225 Answer:40419ae0 h323pdu.cxx(474) H225 Receiving PDU: setup 0:26.029 H225 Answer:40419ae0 transports.cxx(993) H225 Incoming call, first PDU: callReference=32 0:26.029 H225 Answer:40419ae0 h323caps.cxx(1626) H323 Added capability: SpeexNarrow-5.95k{sw} <1> 0:26.030 H225 Answer:40419ae0 h323caps.cxx(1626) H323 Added capability: SpeexNarrow-8k{sw} <2> 0:26.030 H225 Answer:40419ae0 h323c...

...; 0:06.044 H225 Caller:8131128 H225 Check for Fast start by local endpoint > 0:06.044 H225 Caller:8131128 H245 Default OnSelectLogicalChannels, FastStartDisabled > 0:06.046 H225 Caller:8131128 H225 Sending PDU: setup > 0:06.047 H225 Caller:8131128 H225 Reading PDUs: callRef=12098 > 0:06.288 H225 Caller:8131128 H225 Receiving PDU: callProceeding > 0:06.288 H225 Caller:8131128 H225 Handling PDU: CallProceeding callRef=12098 > 0:06.289 H225 Caller:8131128 H225 Set protocol version to 3 and implying H.245 version 5 > 0:06.289 H225 Calle...

...ending Setup PDU 1:17.740 H225 Caller:9e2d880 H225 Check for Fast start by local endpoint 1:17.740 H225 Caller:9e2d880 H245 Default OnSelectLogicalChannels, FastStartDisabled 1:17.740 H225 Caller:9e2d880 H225 Sending PDU: setup 1:17.741 H225 Caller:9e2d880 H225 Reading PDUs: callRef=18577 1:18.327 H225 Caller:9e2d880 H225 Receiving PDU: callProceeding 1:18.327 H225 Caller:9e2d880 H225 Handling PDU: CallProceeding callRef=18577 1:18.327 H225 Caller:9e2d880 H225 Set remote application name: "Cisco IOS 12.x 181/18" 1:18.327 H225 Caller:9e2d880 H2...

I just inherited a Cisco 2621 with a VWIC-1MFT-T1 card in it. Can I make this thing into MGCP gateway or even a SIP gateway for asterisk? Seems like it should bee useful for something! I'm perfectly happy to do my homework, but also don't feel thee need to reinvent the wheel! So, links with relevant info would be appreciated. If there is a config for a 2621 being used as a gateway

...rver>==[10.0.0.0/24]==<altigen phone{8810}> It seems that the altigen is sending a ReleaseComplete and dropping the call before it gets routed to the snom190. Here's an h.323 trace 9: 0:26.489 H225 Answer:9a33350 transports.cxx(1136) H225 Incoming call, first PDU: callReference=1471 0:26.492 H225 Answer:9a33350 h323caps.cxx(1942) H323 Added capability: G.711-uLaw-64k <1> 0:26.496 H225 Answer:9a33350 h323caps.cxx(1942) H323 Added capability: UserInput/hookflash <2> 0:26.499 H225 Answer:9a33350 h323cap...

...alEstablishedConnectionCheck: connectionState=AwaitingLocalAnswer fastStartState=FastStartDisabled 5:58.629 H225 Answer:41b3f3c8 H323 InternalEstablishedConnectionCheck: connectionState=AwaitingLocalAnswer fastStartState=FastStartDisabled 5:58.629 H225 Answer:41b3f3c8 H225 Reading PDUs: callRef=422 5:59.633 ThreadID=0x4cb6a1c0 H323 Answering call: AnswerCallNow 5:59.634 ThreadID=0x4cb6a1c0 H245 Started control channel 5:59.634 ThreadID=0x4cb6a1c0 H245 Sending TerminalCapabilitySet: outSeq=1 5:59.638 ThreadID=0x4cb6a1c0 H245 Sending PDU: request terminalCapabilitySet { sequen...

Hi Michael and Everyone I'm trying to connect Asterisk to a CISCO AS5350 using oh323 and I'm getting this error "reason 24 (Call ended with Q.931 cause)" I've checked the Asterisk wiki and several other resources. Please can anyone give me a hint on what the problem is I reach my wits end. Thanks Tola my config and debug Configuration of OpenH323 channel driver

...8.1.164 -- Called 114@192.168.1.164 16:41:11.345 H225 Caller:815b200 transports.cxx(1587) H323TCP Could not connect to 192.168.1.164:1720 (local port=0) - Connection timed out(110) 16:41:11.345 H225 Caller:815b200 h323.cxx(1445) H225 Sending release complete PDU: callRef=10466 16:41:11.347 H323 Cleaner h323.cxx(1542) H323 Connection ip$localhost/10466 terminated. == No one is available to answer at this time -- Executing Hangup("SIP/116-94e6", "") in new stack == Spawn extension (from-sip, 22, 2) exited non-zer...

...enh323, by editing the makefile as per the comments. Call setup and cleardown seems to work fine, but no audio is being passed in either direction. Doing an "h.323 trace 9", I noticed the following sequence at the end of the call setup: h323.cxx(1685) H225 Handling PDU: Connect callRef=13295 h323.cxx(1925) H225 Set protocol version to 4 h323.cxx(2152) H225 Set remote party name: "root [192.168.0.20]" h323.cxx(2160) H225 Set remote application name: "The NuFone Network's H.323 Channel Driver for Asterisk 1.0.0 (OpenH323 v1.13.5)...