search for: c_iflags

Asterisk as a phone system makes perfect sense in a condo. You can get all the DID's you want and eliminate costs for the owners. You can offer standard FXO for people who don't care and IP sets for people who want to "upgrade" to feature sets. Your door openner is a piece of cake. 1. Create an option in your dialplan only in the "from-access-door" context that reads

Well, I decided to get ROSH back out and try to get it functioning in Syslinux-4. As has been my habit, I first recompiled the Linux binary and tried it out. In the beginning of ROSH, it calls console_ansi_std(). When I was working on this in the past, using this function ensured both the Linux and the Syslinux/COM32 binaries function similarly. When using fgets() to get an input string in the

> From: "James Bean" <james@hdcs.com.au> > Has anyone every setup an external open/close relay, off say a serial > interface, and have an extension trigger the relay? The following will do the trick. Just add a 5vdc solid state relay ('cause you can't sink too much current out of the RS232C port). Substitute "2", "4" or "6" in the

Hello All, Doing a make distprep doesn't seem to work anymore: $ make -f Makefile.in distprep make: @SH@: Command not found make: *** [catman-do] Error 127 I've seen this on AIX & Redhat (gnu make) and Solaris (native make). I suspect this occurs on most platforms. Is this still the recommended way of autoreconf'ing CVS releases for building? -Daz.

Hi, on my system (Linux 2.6.18.8 - ia64), if a domain write on the xencons before xenconsole is initialized the domain gets back what it wrote. This patch fixes this issue by making raw the pty slave very early. (I suppose it doesn''t happen with linux as a guest because it takes a little bit of time before writing to xencons). Tristan. _______________________________________________

hello short description: ssh client sends a wrong all-zero terminal info when requesting forced pseudo-terminal allocation while stdin is not a terminal. sshd then sets the terminals ospeed to 0 because it receives this information from the client. on solaris this means that the pseudo-terminal is closed and output of any remote command is dropped. longer description: what we're doing is

...0 55160 2028 ? Ss Dec06 0:00 scp -f -- /yyy/zzz.sql # strace -fF -v -p 29297 Process 29297 attached - interrupt to quit --- SIGTTOU (Stopped (tty output)) @ 0 (0) --- rt_sigreturn(0x16) = -1 EINTR (Interrupted system call) ioctl(4, SNDCTL_TMR_CONTINUE or TCSETSF, {c_iflags=0x500, c_oflags=0x5, c_cflags=0xbf, c_lflags=0x8a3b, c_line=0, c_cc="\x03\x1c\x7f\x15\x04\x00\x01\x00\x11\x13\x1a\x00\x12\x0f\x17\x16\x00\x00\x00"}) = ? ERESTARTSYS (To be restarted) --- SIGTTOU (Stopped (tty output)) @ 0 (0) --- rt_sigreturn(0x16) = -1 EINTR (Interru...

I have an application that talks to hardware via the serial port. (Actually, it talks to a lot of hardware, banking peripherals). The app runs on both Win32 and OS/2. Of course, the main theme is porting the thing natively to linux (and I'm working on that). But just for fun I tried to get it to work with WINE, and while the "device emulation" works perfectly (much to my

http://bugzilla.mindrot.org/show_bug.cgi?id=282 Summary: ttymodes sent can be invalid Product: Portable OpenSSH Version: -current Platform: ix86 OS/Version: Linux Status: NEW Severity: normal Priority: P2 Component: Miscellaneous AssignedTo: openssh-unix-dev at mindrot.org ReportedBy: todd

This is about 90% of the core work. I omited a few files from the patch set since they are basicly small blocks of #ifndef HAVE_NEXT/#endif to get it to compile. Daimen, feel free to let me know what you applied and what your rejecting and why.. so I can work on cleaning things up. Andre, Only thing of note you may want to look into is NeXT does not use "ut_user" in it's lastlog.

We are in the process of migrating one of our embedded apps to use uart by default instead of sio in RELENG_7 in prep for the day when sio eventually disappears. Unfortunately, the application doesnt want to work with uart with puc backed devices, but still works with sio. Stranger still, the app works with the uart driver when uart attaches to the built in com port on the isa bus. However,

OpenStep, apparently, does not initialize new pty/tty modes to a sane default. I'm thinking this code snippet, added to tty_parse_modes() before the for(;;) loop should suffice: #ifdef HAVE_NEXT tio.c_oflag |= ONLCR; tio.c_lflag |= ECHO; #endif /* HAVE_NEXT */ Also, I've noticed that "ssh -t next_host stty" gives different output than an interactive session to the same

I'm not a ssh expert and I don't know if the log is good or bad, but I too am running OpenSHH under OpenServer. I find that after I connect, the return key has no effect unless I first type: stty sane <Ctrl>j If you've hit <ENTER> before that you must first press <Ctrl>j a couple of times to clean out the buffer. After I type the above command, everything

Without further adieu, I would like to announce that I've finally pushed ROSH, the Read-Only SHell, finally to the point of being reasonably usable. From: Gene Cumm <gene.cumm at gmail.com> Patch ROSH for Syslinux-4 and make it much more usable. Signed-off-by: Gene Cumm <gene.cumm at gmail.com> --- diff --git a/com32/rosh/rosh.c b/com32/rosh/rosh.c index 511fdff..bf1176f

Well, here's the read-only shell (rosh) that I've been working on. It's functional but still quite rough. My primary intention of posting it at this time is such that people have an easy way to demonstrate to themselves that the library calls I made work. This should apply as a patch to the head of the "dir" branch and the patch for c_cflag/c_lflag. The patch is only

2009/1/22 Spiros Ioannou <sivann at gmail.com> > Cher Arnaud, > Hi Spiros, > I send you a demo that reads info from an Emerson Liebert > GXT2-10000T230 through the RS-232 port. This uses the "ESP-II (ESP 2) > Protocol". > Current supported data includes: measurements (voltage, temperature, > etc) , ID strings (serial number, etc), status flags (inverter on,

the -rt patches change the console_semaphore to console_mutex. so a quite large chunk of the patches changes all acquire/release_console_sem() to acquire/release_console_mutex() this commit makes things use more neutral function names which dont make implications about the underlying lock. the only real change is the return value of console_trylock which is inverted from

the -rt patches change the console_semaphore to console_mutex. so a quite large chunk of the patches changes all acquire/release_console_sem() to acquire/release_console_mutex() this commit makes things use more neutral function names which dont make implications about the underlying lock. the only real change is the return value of console_trylock which is inverted from

the -rt patches change the console_semaphore to console_mutex. so a quite large chunk of the patches changes all acquire/release_console_sem() to acquire/release_console_mutex() this commit makes things use more neutral function names which dont make implications about the underlying lock. the only real change is the return value of console_trylock which is inverted from

Dear Ladies and Gentlemen, I have several old, yet functioning APC Smart-UPS (Model 600LS, Part AP600I, Firmware 6JI, no EEPROM, from 1991). They are not supported by Powerchute any more. I run NUT 2.6.5-4 on Windows XP SP3. I use COM1 port with cable 940-0024C. The connection fails with APC Smart protocol driver 3.0 (2.6.3-3534:3540M), APC command table version 3.0 or higher - it works with APC