Displaying 6 results from an estimated 6 matches for "c7000".
Did you mean:
7000
2012 Oct 27
2
Network issue - Windows works but CentOS does not
I am having an extremely strange issue with a BL460c1 (G1) blade on a
c7000 enclosure. I could not for the life of me get the machine to ping
the gateway or any other blade on the same enclosure (yes, the subnet
mask was correct & quadruple-checked); although pinging to the local IP
works. I was almost convinced that it was a network or hardware issue;
until I aske...
2014 Feb 27
0
snmp-ups sends status "OL OB" on HP R3000 UPS with AF465A management card [UPDATE]
...ation which is clearly inaccurate. Both UPSes are currently on
> grid power, as reported by their Web management interface.
>
> Both UPS management cards (HP P/N AF465A) are on the latest firmware
> version (v. 1.01.013).
>
> My system:
> OpenSUSE 13.1 64bit on HP BL460c in a C7000 enclosure
> nut-2.6.5-6.1.5.x86_64
> nut-drivers-net-2.6.5-6.1.5.x86_64
> net-snmp-5.7.2-9.1.2.x86_64
> (NUT installed from official OpenSUSE repository)
>
> UPSes:
> UPS Name : HP RT3000 G2 UPS
> UPS Part Number : AF468A
> UPS Firmware Revision : 01.02.0004
> Com...
2014 May 21
0
upssched timer configuration with redundant UPSes ?
Hello list,
I have the following hardware setup:
- HP C7000 enclosure, with 4 blade servers
- two power supply modules in the enclosure (one is enough to sustain
the 4 blades)
- two UPSes, each one feeding one of the enclosure power supplies
I would like to configure NUT to initiate an early shutdown of that
environment only if *both* UPSes are on battery....
2012 Nov 02
0
performance issues of gluster
hi, all:
I'v got a Gluster testing, and found some performance issuse pertain to Gluster
I built a ten-node Gluster enviroment, (3 X HP 380G5, 4 IBM 3650, 2 X HP C7000. 1 X DELL PE2950, all the network switch & NICs are all gigabit).
And set up three volumes:
a ten-brick distribute volume (ten-brick means this volumes resides on ten nodes, others are same),
a five-brick distribute volume,
a ten-brick distribute replica volume
And I copied a folder ( incl...
2014 Feb 27
2
snmp-ups sends status "OL OB" on HP R3000 UPS with AF465A management card
...ower_alarm_ob[]") -- an
information which is clearly inaccurate. Both UPSes are currently on
grid power, as reported by their Web management interface.
Both UPS management cards (HP P/N AF465A) are on the latest firmware
version (v. 1.01.013).
My system:
OpenSUSE 13.1 64bit on HP BL460c in a C7000 enclosure
nut-2.6.5-6.1.5.x86_64
nut-drivers-net-2.6.5-6.1.5.x86_64
net-snmp-5.7.2-9.1.2.x86_64
(NUT installed from official OpenSUSE repository)
UPSes:
UPS Name : HP RT3000 G2 UPS
UPS Part Number : AF468A
UPS Firmware Revision : 01.02.0004
Communication Board Firmware Revision : 01.06.0026
Ca...
2014 Mar 11
2
snmp-ups sends status "OL OB" on HP R3000 UPS with AF465A management card [UPDATE]
...ccurate. Both UPSes are currently on
>> grid power, as reported by their Web management interface.
>>
>> Both UPS management cards (HP P/N AF465A) are on the latest firmware
>> version (v. 1.01.013).
>>
>> My system:
>> OpenSUSE 13.1 64bit on HP BL460c in a C7000 enclosure
>> nut-2.6.5-6.1.5.x86_64
>> nut-drivers-net-2.6.5-6.1.5.x86_64
>> net-snmp-5.7.2-9.1.2.x86_64
>> (NUT installed from official OpenSUSE repository)
>>
>> UPSes:
>> UPS Name : HP RT3000 G2 UPS
>> UPS Part Number : AF468A
>> UPS Firmw...