search for: c400

...ot;If I only had time...damn this sleep thing" ideas, but I really wonder how hard/cost effective it would be to build an open source IP phone or phone adapter (ala ATA). In about 20 minutes of mulling and research, I figure you could do it for about $40 in parts plus coding time... 1 DS80C400 Ethernet enabled microcontroller with built in IPV4/V6 stack $10 1 DSP56K hardware DSP (you may even be able to dispense with this if the C400 is fast enough to do the codecing...then you just need a 8 or 16 bit DAC/ADC) $10 Misc parts/case/whatnot $20.

...isk, with an ISDN card with Cologne Chipset. Here is the lspci: 01:09.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) Subsystem: Cologne Chip Designs GmbH ISDN Board Flags: bus master, medium devsel, latency 16, IRQ 5 I/O ports at c400 [size=8] Memory at fdefd000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 1 I think i need the zaphfc module to make it work, but it is not included into the dahdi package, and i cant find it. The command dahdi_hardware says this: dahdi_hardware...

...at this point. The same disk image booting from floppy works fine, not abort/retry/ignore errors, and the lan starts up I can login and do whatever necessary. This problem ONLY exists on machines using the 3Com 3c9xx cards. (In this case I've tried on Dell GX150/240/260 desktops, and Dell C400 laptops). Our other range of machines usethe Intel E100Pro and its variants and have no problems with the pxe served boot disk and bootup and logon great. Just the 3coms give me trouble. Has anyone seen this? or know how to get around this issue? (using the floppy for all these machines is troubl...

Hi! I think it is a great idea. The DS80C400 needs external memory, and/or flash. It have the Ethernet integrated, but it is really slow (it is 8051 architecture), and yes, I know it can go up ti 75Mhz, but only gives 18MIPS max. I would use ATmega128 from atmel (16MIPS at only 16Mhz), take a look at: http://www.ethernut.de (project usi...

...install R. The basic installation appears to have worked, I can start and run R. When I try to start the HTML help system, I get the errors listed below. Any help solving my problem would be appreciated. Thanks John Sorkin R intalled using YUM under Red Hat Fedora Core 3. Computer: Dell Latitude C400. help.start()Making links in per-session dir .../usr/lib/R/share/sh/help-links.sh: line 9: /usr/lib/R/bin/mkinstalldirs: No such file or directory ln: creating symbolic link `/tmp/RtmpxI5110/.R/doc/manual' to `/usr/lib/R/doc/manual': No such file or directoryln: creating symbolic link `...

...a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0330-0331 : MPU401 UART 0376-0376 : ide1 0388-0389 : OPL2/3 (left) 038a-038b : OPL2/3 (right) 03c0-03df : vga+ 03f6-03f6 : ide0 0cf8-0cff : PCI conf1 5000-500f : 0000:00:1f.3 c000-c0ff : 0000:02:01.0 c000-c0ff : 8139too c400-c4ff : 0000:02:02.0 c400-c4ff : CMI8738 d000-d01f : 0000:00:1f.2 d000-d01f : uhci_hcd d800-d81f : 0000:00:1f.4 d800-d81f : uhci_hcd f000-f00f : 0000:00:1f.1 f000-f007 : ide0 f008-f00f : ide1 bash-2.05b$ cat /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a...

What is most effective amount of memory for a RedHat 6.0 box used as a file / print / mail server? I have 128MB in a Celeron 400 box running file/print/mail services & Gnome. It seems a little slow. Not sure if it's the RAM, video ( cheapo 2MB Cirrus Logic card) &/or hard drive Quantum IDE 6GB hard drive.

...: [Asterisk-Users] Re: Open source IP phone, maybe? Ubicom's Scenix IP2K. Sxdesign has an SIP phone platform using that chip http://www.sxdesign.com/index.php?page=solutions&submnu=voip Jose Ildefonso Camargo Tolosa wrote: > Hi! > > I think it is a great idea. > > The DS80C400 needs external memory, and/or flash. It have the > Ethernet integrated, but it is really slow (it is 8051 architecture), > and yes, I know it can go up ti 75Mhz, but only gives 18MIPS max. I > would use ATmega128 from atmel (16MIPS at only 16Mhz), take a look at: > http://www.ethe...

...od.R") The script I'm running (which obviously requires that the package 'rmetasim' be installed) follows. Beware that the script takes about 15 minutes to run on my old computer (the one on which it doesn't crash. For what it's worth, that computer is a Dell Latitude C400 running Windows XP Pro SP2, 866 MHz Pentium III processor, 512 MB of RAM). Any suggestions would be greatly appreciated. ############################################################################ #ArchI_burnin_NOdensdep-mod.R# habitats <- 1 carrycap <- 7500 stages <- 5 rland <- N...

...: dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 01f0-01f7 : ide0 0378-037a : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial 04d0-04d1 : pnp 00:0d 0cf8-0cff : PCI conf1 b800-b8ff : 0000:01:00.0 b800-b8ff : BusLogic BT-950 bc00-bc3f : 0000:01:08.0 bc00-bc3f : e100 c400-c41f : 0000:00:1f.3 c800-c81f : 0000:00:1d.0 cc00-cc1f : 0000:00:1d.1 d000-d01f : 0000:00:1d.2 d400-d41f : 0000:00:1d.3 d800-d80f : 0000:00:1f.2 dc00-dc03 : 0000:00:1f.2 e000-e007 : 0000:00:1f.2 e400-e403 : 0000:00:1f.2 e800-e807 : 0000:00:1f.2 ec00-ec07 : 0000:00:02.0 ffa0-ffaf : 0000:00:1f.1 000...

...I'm running (which obviously requires that the package >> 'rmetasim' be installed) follows. Beware that the script takes about 15 >> minutes to run on my old computer (the one on which it doesn't crash. >> For what it's worth, that computer is a Dell Latitude C400 running >> Windows XP Pro SP2, 866 MHz Pentium III processor, 512 MB of RAM). Any >> suggestions would be greatly appreciated. >> >> ########################################################################## >> ## >> #ArchI_burnin_NOdensdep-mod.R# >> >&...

...rface driver registered Registered tone zone 2 (France) ================= # lspci -v 00:0f.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface Subsystem: Unknown device b100:0003 Flags: bus master, medium devsel, latency 64, IRQ 12 I/O ports at c400 [size=256] Memory at dfffe000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 ================= # cat /etc/zaptel.conf fxsks=1 loadzone=fr defaultzone=fr ================= # ztcfg -vvvv Zaptel Version: 1.4.7 Echo Canceller: MG2 Configura...

Le 25/11/2019 ? 09:15, L.P.H. van Belle via samba a ?crit?: > I tested Friday also with a W7 pc. > Not working, im try to see what i can do today on this problem. > > Greetz, > > Louis Hi Louis, Thanks for your help. I'm still investigating on it, but sadly i cannot upgrade to 4.11 as those servers cannot reach external repositories for security reasons (those servers

I successfully installed Xen 2.0.4 from source on a Slackware 10 system. I installed grub, got that working and all. But when I boot the dom0 kernel, I get: cmd 0x5a timed out hdc: lost interrupt My hdc is my dvd burner... when I applied a kernel option of "hdc=ide-scsi" it seemed to have skipped over it but recieved the same error on hdd ... I''ve tried recompiling with

...refetchable) [size=32] I/O ports at d400 [size=32] 00:01.0 Network controller: Cologne Chip Designs GmbH ISDN network controller [HFC-PCI] (rev 02) Subsystem: Cologne Chip Designs GmbH ISDN Board Flags: bus master, medium devsel, latency 16, IRQ 18 I/O ports at c400 [disabled] [size=8] Memory at fd800000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 1 [root at odysseus install-asterisk]# ===== Output from /etc/init.d/misdn-init scan, config and start ===== [root at odysseus asterisk-1.4.8]# service mis...

...DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at cc00 [size=8] Region 1: I/O ports at c880 [size=4] Region 2: I/O ports at c800 [size=8] Region 3: I/O ports at c480 [size=4] Region 4: I/O ports at c400 [size=16] Region 5: I/O ports at c080 [size=16] Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [b0] PCIe advanced features <?> Kernel driver in use: ata_...

Here are patches to do offline deduplication for Btrfs. It works well for the cases it''s expected to, I''m looking for feedback on the ioctl interface and such, I''m well aware there are missing features for the userspace app (like being able to set a different blocksize). If this interface is acceptable I will flesh out the userspace app a little more, but I believe the