search for: c3d0s0

I''ve got knee deep into learning how to use Opensolaris and zfs, and I see now that my goal of home zfs server may have been better served if I had partitioned the install disk leaving some of the 60GB to be added to a zpool. First, how much space does a working OS need. I don''t mean bare minimum but to be comfortable and have some growing room (on the install disk)?

...this: 1. Created a new 20GB virtual disk. 2. Booted into the VM. 3. Created a Solaris partition covering the whole virtual disk. 4. Created a slice 0 covering cylinders 1 to 2607 (i.e. the whole disk but cylinder 0). 4. Attached the slice 0 to the root pool using "zpool attach rpool /dev/dsk/c3d0s0 /dev/dsk/c5t0d0s0". 5. Installed grub using "installgrub /boot/grub/stage1 /boot/grub/stage2 /dev/rdsk/c5t0d0s0". 6. detached the old 8GB virtual disk using "zpool detach rpool /dev/dsk/c3d0s0". 7. init 6. 8. reconfigured the VM BIOS to boot from the 2nd HDD first. When at...

...ol to increase my storage capacity without a raid controller? >From what I''ve found, the command should be "zpool add rpool <device>". Is that right? If so, how do I track down the device name? "zpool status" tells me my current device (hdd0) is named "c3d0s0". Where do I find the other device name? Thanks! -- This message posted from opensolaris.org

...t; 5 zpool-rpool 7770 <none> zpool status doesn''t show any problems: # zpool status rpool pool: rpool state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c3d0s0 ONLINE 0 0 0 Perhaps related to this or perhaps not, I discovered recently that time-sliderd was doing just a ton of "close" requests. I disabled time-sliderd while trying to solve my performance problem. I was also getting these error messages in the time-sliderd log...

.../ide at 0/cmdk at 0,0 1. c3d1 <drive unknown> /pci0,0/pci-ide at 1,1/ide at 0/cmdk at 1,0 # ls -lah /dev/dsk/c3d1s0 lrwxrwxrwx 1 root root 50 2009-01-13 14:16 /dev/dsk/c3d1s0 -> ../../devices pci at 0,0/pci-ide at 1,1/ide at 0/cmdk at 1,0:a # zpool attach -f rpool c3d0s0 c3d1s0 cannot open ''/dev/dsk/c3d1s0'': No such device or address # zpool attach -f rpool c3d0 c3d1 cannot label ''c3d1'': EFI labeled devices are not supported on root pools. any ideas? I really don''t know why format shows "drive unknown" Thank...

.../pci at 0,0/pci-ide at 1f,2/ide at 0/cmdk at 0,0 1. c4d0 <DEFAULT cyl 60797 alt 2 hd 255 sec 63> /pci at 0,0/pci-ide at 1f,2/ide at 1/cmdk at 0,0 Specify disk (enter its number): 0 selecting c3d0 No defect list found [disk formatted, no defect list found] /dev/dsk/c3d0s0 is part of active ZFS pool rpool. Please see zpool(1M). FORMAT MENU: disk - select a disk type - select (define) a disk type partition - select (define) a partition table current - describe the current disk format - format and analyze th...

...NLINE 0 0 0 c4d0s0 ONLINE 0 0 0 ** I run these commands to show the status of each drive from ZFS''s perspective. root at nas:~# zpool create test c3d0 invalid vdev specification use ''-f'' to override the following errors: /dev/dsk/c3d0s0 is part of exported or potentially active ZFS pool tank. Please see zpool(1M). root at nas:~# zpool create test c3d1 invalid vdev specification use ''-f'' to override the following errors: /dev/dsk/c3d1s0 is part of exported or potentially active ZFS pool rpool. Please see zpool(1M...

...panda:~$ zpool status -xv all pools are healthy rafal at panda:~$ zpool status pool: rpool state: ONLINE scrub: scrub completed after 2h51m with 0 errors on Mon Dec 29 02:58:19 2008 config: NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 c3d0s0 ONLINE 0 0 0 errors: No known data errors rafal at panda:~$ The next day I recovered the system meaning I have the grub menu and the system boots up fine automatically without any manual intervention. After that the update manager recognized that on pkg.opensolaris.org there is a...

I''ve got a CentOS 5.3 dom0 with Xen 3.4.1-rc5 (or so). I''ve tried the same stuff below with 3.4.0, no difference. I''m trying to install 2009.06 PV domU based on instructions from [1] and [2]. I can run the install fine, I can also get the kernel and boot archive (from [2]) after the install. But for the life of me I can''t get the installed domU to boot. If I

Machine is running x86 snv_94 after recent upgrade from opensolaris 2008.05. ZFS and zpool reported no troubles except suggesting upgrade for from ver.10 to ver.11. seemed like a good idea at the time. system up for several days after that point then took down for some unrelated maintenance. now will not boot the opensol, drops to grub prompt, no menus. zfs was mirrored on two disks c6d0s0 and

...39;disk' id=1 guid=7618479640615121644 path='/dev/dsk/c2d1s0' devid='id1,cmdk@AST3320620AS=____________3QF0YZEM/a' phys_path='/pci@0,0/pci10de,26f@10/pci-ide@8/ide@0/cmdk@1,0:a' whole_disk=1 children[2] type='disk' id=2 guid=1801493855297946488 path='/dev/dsk/c3d0s0' devid='id1,cmdk@AST3320620AS=____________3QF0PGBS/a' phys_path='/pci@0,0/pci10de,26f@10/pci-ide@8/ide@1/cmdk@0,0:a' whole_disk=1 children[3] type='disk' id=3 guid=15710901655082836445 path='/dev/dsk/c3d1s0' devid='id1,cmdk@AST3320620AS=____________3QF0VABG/a...

...#39;' | whole_disk=1 | DTL=31 | children[3] | type=''disk'' | id=3 | guid=7852006658048665355 | path=''/dev/dsk/c3d0s0'' | devid=''id1,cmdk at AST3400632NS=____________5NF1EEZ1/a'' | phys_path=''/pci at 0,0/pci-ide at 12/ide at 1/cmdk at 0,0:a'' | whole_disk=1 | DTL=30 I have foun...

Hi, I wanted to add a disk to the tank pool to create a mirror. I accidentally used zpool add ? instead of zpool attach ? and now the disk is added. Is there a way to remove the disk without loosing data? Or maybe change it to mirror? Thanks, Martijn -- This message posted from opensolaris.org

Hello all, It was often asked and discussed on the list about "how to change rpool HDDs from AHCI to IDE mode" and back, with the modern routine involving reconfiguration of the BIOS, bootup from separate live media, simple import and export of the rpool, and bootup from the rpool. The documented way is to reinstall the OS upon HW changes. Both are inconvenient to say the least.