search for: c1t10d0

.../sbus at 3,0/SUNW,fas at 3,8800000/sd at 2,0 1. c0t3d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /sbus at 3,0/SUNW,fas at 3,8800000/sd at 3,0 2. c0t4d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /sbus at 3,0/SUNW,fas at 3,8800000/sd at 4,0 3. c1t10d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /sbus at 3,0/QLGC,isp at 0,10000/sd at a,0 4. c1t11d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /sbus at 3,0/QLGC,isp at 0,10000/sd at b,0 5. c1t12d0 <SUN18G cyl 7506 alt 2 hd 19 sec 248> /sbus at 3...

...0.0 31.9? ? > 0.0???78.8???1 100 c1t7d0 > >???404.1? ? 0.0? ? > 1.9? ? 0.0? 0.0 34.0? ? > 0.0???84.1???1 100 c1t8d0 > >???407.1? ? 0.0? ? > 1.9? ? 0.0? 0.0 31.2? ? > 0.0???76.6???1 100 c1t9d0 > >???407.5? ? 0.0? ? > 2.0? ? 0.0? 0.0 33.2? ? > 0.0???81.4???1 100 c1t10d0 > >???402.8? ? 0.0? ? > 2.0? ? 0.0? 0.0 33.5? ? > 0.0???83.2???1 100 c1t11d0 > >???408.9? ? 0.0? ? > 2.0? ? 0.0? 0.0 32.8? ? > 0.0???80.3???1 100 c1t12d0 > >? > ???9.6???10.8? ? > 0.1? ? 0.9? 0.0? 0.4? ? > 0.0???20.1???0? 17 > c1t13d0 > >? > ???0.0...

...32.1 0.0 79.0 1 100 c1t6d0 404.3 0.0 1.9 0.0 0.0 31.9 0.0 78.8 1 100 c1t7d0 404.1 0.0 1.9 0.0 0.0 34.0 0.0 84.1 1 100 c1t8d0 407.1 0.0 1.9 0.0 0.0 31.2 0.0 76.6 1 100 c1t9d0 407.5 0.0 2.0 0.0 0.0 33.2 0.0 81.4 1 100 c1t10d0 402.8 0.0 2.0 0.0 0.0 33.5 0.0 83.2 1 100 c1t11d0 408.9 0.0 2.0 0.0 0.0 32.8 0.0 80.3 1 100 c1t12d0 9.6 10.8 0.1 0.9 0.0 0.4 0.0 20.1 0 17 c1t13d0 0.0 22.7 0.0 0.5 0.0 0.5 0.0 22.8 0 33 c1t14d0 Is this an indicator t...

this is off list on purpose ? > run zpool import, it will search all attached storage and give you a list > of availible pools. then run zpool import poolname or add a -f if you > didn''t export before the install/upgrade. assume worst case someone walks up to you and drops an array on you. They say "its ZFS an'' I need that der stuff ''k? " all

...out of 5.00T at 311M/s, 3h37m to go 82.0G resilvered, 22.42% done config: NAME STATE READ WRITE CKSUM data01 DEGRADED 0 0 0 raidz2-0 ONLINE 0 0 0 c1t8d0 ONLINE 0 0 0 c1t9d0 ONLINE 0 0 0 c1t10d0 ONLINE 0 0 0 c1t11d0 ONLINE 0 0 0 c1t12d0 ONLINE 0 0 0 c1t13d0 ONLINE 0 0 0 c1t14d0 ONLINE 0 0 0 raidz2-1 DEGRADED 0 0 0 c1t22d0 ONLINE 0 0 0 c1t15d...

...1 0.1 1.1 1 5 c1t4d0 1.8 78.2 107.4 209.2 0.0 0.1 0.1 1.1 1 5 c1t5d0 0.5 53.7 32.0 106.7 0.0 0.1 0.1 1.6 0 3 c1t8d0 0.5 51.8 32.0 106.7 0.0 0.1 0.1 1.7 0 3 c1t9d0 0.2 52.5 10.7 106.9 0.0 0.1 0.1 1.3 0 3 c1t10d0 0.3 51.3 21.3 107.5 0.0 0.1 0.1 1.5 0 3 c1t11d0 0.3 52.3 21.3 107.6 0.0 0.1 0.1 1.7 0 3 c1t12d0 $ zpool iostat -v 6 capacity operations bandwidth pool used avail read write read write ----------- ----- ----- --...

...NLINE scrub: none requested config: NAME STATE READ WRITE CKSUM tol-pool ONLINE 0 0 0 raidz1 ONLINE 0 0 0 c1t8d0 ONLINE 0 0 0 c1t9d0 ONLINE 0 0 0 c1t10d0 ONLINE 0 0 0 spare ONLINE 0 0 0 c1t11d0 ONLINE 0 0 0 c2t13d0 ONLINE 0 0 0 c1t12d0 ONLINE 0 0 0 c1t13d0 ONLINE 0 0 0 raidz1...

I physically removed a disk (c3t8d0 used by ZFS ''pool01'') from a 3310 JBOD connected to a V210 running s10u3 (11/06) and ''zpool status'' reported this: # zpool status pool: pool01 state: DEGRADED status: One or more devices could not be opened. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Attach the

I currently have a 7x1.5tb raidz1. I want to add "phase 2" which is another 7x1.5tb raidz1 Can I add the second phase to the first phase and basically have two raid5''s striped (in raid terms?) Yes, I probably should upgrade the zpool format too. Currently running snv_104. Also should upgrade to 110. If that is possible, would anyone happen to have the simple command lines to