search for: c0t1d0s0

This is a hypothetical question that could actually happen: Suppose a root pool is a mirror of c0t0d0s0 and c0t1d0s0 and for some reason c0t0d0s0 goes off line, but comes back on line after a shutdown. The primary boot disk would then be c0t0d0s0 which would have much older data than c0t1d0s0. Under normal circumstances ZFS would know that c0t0d0s0 needs to be resilvered. But in this case c0t0d0s0 is the boot di...

Hello, I recently installed SunOS 5.11 snv_91 onto a Ultra 60 UPA/PCI with OpenBoot 3.31 and two 300GB SCSI disks. The root file system is UFS on c0t0d0s0. Following the steps in ZFS Admin I have attempted to convert root to ZFS utilizing c0t1d0s0. However, upon "init 6" I am always presented with: Bad magic number in disk label can''t open disk label package My Steps: 1) format 1 -> Partition -> Modify -> Free hog -> All available to slice 0 -> label > quit 2) zpool create pool c0t1d0s0 3) lucreate -c...

Here is what I have configured: T2000 with OBP 4.28.6 2008/05/23 12:07 with 2 - 72 GB disks as the root disks OpenSolaris Nevada Build 91 Solaris Express Community Edition snv_91 SPARC Copyright 2008 Sun Microsystems, Inc. All Rights Reserved. Use is subject to license terms. Assembled 03 June 2008

hello, all I am have constraint disk space (only 8GB) while running os inside vm. Now i want to add more. It is easy to add for vm but how can i update fs in os? I cannot use autoexpand because it doesn''t implemented in my system: $ uname -a SunOS sopen 5.11 snv_111b i86pc i386 i86pc If it was 171 it would be grate, right? Doing following: o added new virtual HDD (it becomes

Zpool split is a wonderful feature and it seems to work well, and the choice of which disk got which name was perfect! But there seems to be an odd anomaly (at least with b132) . Started with c0t1d0s0 running b132 (root pool is called rpool) Attached c0t0d0s0 and waited for it to resilver Rebooted from c0t0d0s0 zpool split rpool spool Rebooted from c0t0d0s0, both rpool and spool were mounted Rebooted from c0t1d0s0, only rpool was mounted It seems to me for consistency rpool should not have bee...

...le. -d gives the exported file or block device. ----- Examples: vdiskadm export -x vdi:sparse -d test_export.vdi xxx vdiskadm export -x vmdk -d test_export.vmdk xxx vdiskadm export -x raw -d test_export root-172-20-24-161 vdiskadm export -x raw -d test_export zzz vdiskadm export -x raw -d /dev/dsk/c0t1d0s0 xxx vdiskadm export -x raw -d root.raw root-172-20-24-161 vdiskadm export -x raw -d /dev/zvol/dsk/testpool/export_test root-172-20-24-161

I understand that currently, at least under Solaris 10u6, it is not possible to jumpstart a new system with a zfs root using a flash archive as a source. Can anyone comment as to whether this restriction will pass in the near term, or if this is a while out (6+ months) before this will be possible? Thanks, Jerry

With the release of the Nevada build 90 binaries, it is now possible to install SXCE directly onto a ZFS root filesystem, and also put ZFS swap onto a ZFS filesystem without worrying about having it deadlock. ZFS now also supports crash dumps! To install SXCE to a ZFS root, simply use the text-based installer, after choosing "Solaris Express" from the boot menu on the DVD. DVD download

...(5.9 GB) d10: Submirror of d0 State: Okay Size: 12289725 blocks (5.9 GB) Stripe 0: Device Start Block Dbase State Reloc Hot Spare c0t0d0s0 0 No Okay Yes d20: Submirror of d0 State: Needs maintenance Invoke: metareplace d0 c0t1d0s0 <new device> Size: 12289725 blocks (5.9 GB) Stripe 0: Device Start Block Dbase State Reloc Hot Spare c0t1d0s0 0 No Maintenance Yes d30: Submirror of d0 State: Okay Size: 12289725 blocks (5.9 GB) Stripe 0: Device...

Greetings all- I have a new X4200 that I''m getting ready to deploy. It has four 146 GB SAS drives. I''d like to setup the box for maximum redundancy on the data stored on these drives. Unfortunately, it looks like ZFS boot/root aren''t really options at this time. The LSI Logic controller in this box only supports either a RAID0 array with all four disks, or a RAID 1

...pool can be imported using its name or numeric identifier. config: rpool ONLINE mirror ONLINE c0t2d0s0 ONLINE c0t3d0s0 ONLINE pool: tank id: 12861119534757646169 state: ONLINE action: The pool can be imported using its name or numeric identifier. config: tank ONLINE mirror ONLINE c0t0d0s0 ONLINE c0t1d0s0 ONLINE # zpool import tank cannot import ''tank'': pool may be in use from other system use ''-f'' to import anyway I installed Solaris 11 Express USB via Hiroshi-san''s Windows tool. Unfortunately it also panics trying to import the pool although zpool...

All, The attached script is causing the following error message ... bash-3.00# ./zmon_bug.d dtrace: error on enabled probe ID 2 (ID 4394: fbt:genunix:copen:entry): invalid address (0xfd91747f) in predicate at DIF offset 120 dtrace: error on enabled probe ID 2 (ID 4394: fbt:genunix:copen:entry): invalid address (0xfef81a3f) in predicate at DIF offset 120 Any ideas? thxs Joe --

...or more devices are missing from the system. action: The pool cannot be imported. Attach the missing devices and try again. see: http://www.sun.com/msg/ZFS-8000-6X config: syspool UNAVAIL missing device mirror-0 ONLINE c0t0d0s0 ONLINE c0t1d0s0 ONLINE Additional devices are known to be part of this pool, though their exact configuration cannot be determined. =========== I thought the purpose of the export was to remove concerns about which devices are in the pool so it could be reassembled on the other side. But, like...

Is ZFS efficient at handling huge populations of tiny-to-small files - for example, 20 million TIFF images in a collection, each between 5 and 500k in size? I am asking because I could have sworn that I read somewhere that it isn''t, but I can''t find the reference. Thanks, Brian -- - Brian Gupta http://opensolaris.org/os/project/nycosug/

...2009.06 from SXCE snv_98. I can''t use AI Installer because OpenPROM is version 3.27. So I built IPS from source, then created a zpool on a spare drive and installed OS 2006.06 on it To make the disk bootable I used: installboot -F zfs /usr/platform/`uname -i`/lib/fs/zfs/bootblk /dev/rdsk/c0t1d0s0 using the executable from my new rpool. But when I boot my new disk, I get the error "no pool_props" and the booting process returns to prompt with "Fast Device MMU miss". I read OpenPROM 4.x was needed because of AI ? Did I miss something ? Can you enlighten me ? Thanks you...

...phys_path: ''/pci at 0,0/pci8086,244e at 1e/pci11ab,11ab at 2/disk at 0,0:a'' whole_disk: 1 DTL: 27 children[1]: type: ''disk'' id: 1 guid: 13323938879160252094 path: ''/dev/dsk/c0t1d0s0'' devid: ''id1,sd at SATA_____ST31500341AS________________9VS25DAN/a'' phys_path: ''/pci at 0,0/pci8086,244e at 1e/pci11ab,11ab at 2/disk at 1,0:a'' whole_disk: 1 DTL: 181 children[2]: type:...

Hi, I am using FreeBSD 8.2 and went to add 4 new disks today to expand my offsite storage. All was working fine for about 20min and then the new drive cage started to fail. Silly me for assuming new hardware would be fine :( The new drive cage started to fail, it hung the server and the box rebooted. After it rebooted, the entire pool is gone and in the state below. I had only written a few

...6339482 Title: ''df -F zfs <dataset> return the wrong result That I believe to be related to this issue. Has anyone seen this before and do you have a workaround and information and advice to share. # df -k Filesystem kbytes used avail capacity Mounted on /dev/dsk/c0t1d0s0 13283479 10825523 2325122 83% / /devices 0 0 0 0% /devices ctfs 0 0 0 0% /system/contract proc 0 0 0 0% /proc mnttab 0 0 0 0% /etc/m...

...ool2 408G 123G 285G 30% ONLINE - # zpool status pool: pool1 state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM pool1 ONLINE 0 0 0 raidz ONLINE 0 0 0 c0t1d0s0 ONLINE 0 0 0 c0t2d0s0 ONLINE 0 0 0 c0t3d0s0 ONLINE 0 0 0 c0t4d0s0 ONLINE 0 0 0 c0t5d0s0 ONLINE 0 0 0 pool: pool2 state: ONLINE scrub: none requested config: NAME...

Hi, in preparation to try zfs boot on sparc I installed all recent patches incl. feature patches comming from s10s_u3wos_10 and after reboot finally 137137-09 (still having everything on UFS). Now it doesn''t boot at anymore: ############################### Sun Fire V240, No Keyboard Copyright 2006 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.22.23, 2048 MB memory installed,