search for: bus0

...roken in 2.4.5 ? I had no problems mounting without ext3. WCHAN shows __wait_on_buffer I just rebooted, after trying without success to use SysRq and avoid fsck. I'd wait and build 2.4.6, but my load average... Any umount -> D. Parallelizing fsck version 1.22 (22-Jun-2001) /dev/ide/host0/bus0/target0/lun0/part1 was not cleanly unmounted, check forced. /dev/ide/host0/bus0/target0/lun0/part1: Deleted inode 97249 has zero dtime. FIXED. /dev/ide/host0/bus0/target0/lun0/part1: Deleted inode 97304 has zero dtime. FIXED. /dev/ide/host0/bus0/target0/lun0/part1: Deleted inode 97513 has zero dt...

...unt file systems in fstab mount -v -n -a My shutdown script uses: umount -v -n -r -a mount -v -n -o remount,ro / I received the following messages: INIT: version 2.83 booting Started device management daemon for /dev fsck 1.25 (20-Sep-2001) [/sbin/fsck.ext3 -- /] fsck.ext3 -a -C0 /dev/ide/host0/bus0/target0/lun0/part1 ext2fs_check_if_mount: No such file or directory while determining whether /dev/ide/host0/bus0/target0/lun0/part1 is mounted. /dev/ide/host0/bus0/target0/lun0/part1: clean, 22842/2560864 files, 178366/2560351 blocks EXT3 FS 2.4-0.9.12, 10 Oct 2001 on ide0(3,1), internal journal /...

...odev,usrquota,grpquota) /dev/md/6 on /home type ext3 (rw,nosuid,nodev,usrquota,grpquota) /dev/md/7 on /tmp type ext3 (rw,nosuid,nodev,usrquota,grpquota) hdn@aurora:~$ cat /proc/mdstat Personalities : [raid5] read_ahead 1024 sectors md1 : active raid5 ide/host2/bus1/target0/lun0/part1[2] ide/host2/bus0/target0/lun0/part1[3] ide/host0/bus1/target0/lun0/part1[0] ide/host0/bus0/target0/lun0/part1[1] 1023744 blocks level 5, 128k chunk, algorithm 2 [3/3] [UUU] md3 : active raid5 ide/host2/bus1/target0/lun0/part3[2] ide/host2/bus0/target0/lun0/part3[1] ide/host0/bus1/target0/lun0/part3[3] ide...

Is there an updated version of the fileutils df that will show mounted ext3 partitions? I'm using fileutils-4.1. -- Curtis Hogg [buckminst@inconnu.isu.edu] ---------------------------------------------- T-shirt Of The Day: I'm the person your mother warned you about. ---------------------------------------------- Email 1 - buckminst@inconnu.isu.edu Email 2 - buckminst@hotmail.com WWW -

...0% 31463 0% 0 0% 11339977 0% Output of iostat: Linux 2.4.27-3-686-smp (data.clm.net4all.ch) 21. 07. 06 cpu-moy: %user %nice %sys %iowait %idle 0,16 0,00 1,65 0,00 98,19 Device: tps Blk_lus/s Blk_?crits/s Blk_lus Blk_?crits scsi/host0/bus0/target0/lun0/disc 165,50 310,46 617,07 1800983948 3579692632 scsi/host0/bus0/target0/lun0/part1 165,48 309,32 617,06 1794404866 3579616544 scsi/host0/bus0/target0/lun0/part5 0,02 1,13 0,01 6579064 7608...

...ec_len=16396, name_len=2 All symlinks pointing to the affected directory were broken, so I noticed it was empty. I unmounted /usr/local/src, ran fsck, and this time it reported no errors, what wasn't the case with ext2 (although I didn't see any changes by fsck): # fsck -v /dev/ide/host0/bus0/target0/lun0/part3 Parallelizing fsck version 1.21 (15-Jun-2001) e2fsck 1.21, 15-Jun-2001 for EXT2 FS 0.5b, 95/08/09 /dev/ide/host0/bus0/target0/lun0/part3: clean, 180665/512512 files, 476613/512071 blocks I mounted the partition and everything was there. Jun 22 02:41:32 pervalidus kernel: Journa...

...lflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid bogomips : 4797.23 [root@wally /]# uptime 10:02:55 up 23 days, 23:48, 4 users, load average: 0.00, 0.00, 0.00 [root@wally /]# uname -a Linux wally 2.4.23 #1 Tue Dec 23 09:44:22 CET 2003 i686 unknown [root@wally /]# mount /dev/ide/host0/bus0/target0/lun0/part1 on / type ext3 (rw,errors=remount-ro) proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw) /dev/ide/host0/bus0/target0/lun0/part5 on /media type vfat (rw,noexec,nodev,gid=2000,umask=002) usbdevfs on /proc/bus/usb type usbdevfs (rw) automount(pid1324) on /data/net type...

...[ 8.655120] input: bcm5974 as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/input/input8 [ 8.672846] usbcore: registered new interface driver bcm5974 [ 8.681031] random: crng init done [ 8.701855] bcma-pci-bridge 0000:03:00.0: enabling device (0000 -> 0002) [ 8.702343] bcma: bus0: Found chip with id 0x4360, rev 0x03 and package 0x00 [ 8.702389] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x2B, class 0x0) [ 8.702415] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x2A, class 0x0) [ 8.702460] bcma: bus0: Core 2 found: ARM CR4 (...

...oot-info-table /root/CDroot and created a CD. Booting works, the external USB hard drive is recognized - I believe, but just when the boot process shall continue to use my USB drive, mounting of devfs fails (see the attached image too): ... sda: assuming drive cache: write ... /dev/scsi/host2/bus0/target0/lun0:<7>usb-storage: .... p1 p2 Attached scsi disk sda at scsi2, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0 ReiserFS: sda2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on sda2 kjournald starting. Commit interval 5 se...

Hi, I'm encountering a strange situation. I'm writing to an ext3 filesystem mounted like this: /dev/scsi/host2/bus0/target0/lun0/part3 on /tmp/volumes/md0 type ext3 (rw,noatime,data=ordered) with the physical device being a FC-connected RAID (IBM DF4000) no software raid personality is used I'm using 2.4.18-19.7 My test program writes files in a loop, with the essential system calls being: [pid 13335] mkd...

...7.437216] thunderbolt 0000:07:00.0: Upstream Port Number: 5 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 255ms [ 7.438664] thunderbolt 0000:07:00.0: unknown1: 0x0 unknown4: 0x0 [ 7.447649] bcma-pci-bridge 0000:04:00.0: enabling device (0000 -> 0002) [ 7.448712] bcma: bus0: Found chip with id 0x4331, rev 0x02 and package 0x09 [ 7.450140] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 7.451518] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0) [ 7.453039] bcma: bus0: Core 2 found: PCIe (man...

...ff] [ 5.053954] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff] [ 5.060845] pci_bus 0000:00: root bus resource [bus 00-ff] [ 5.066361] pci 0000:00:02.0: [11ab:6828] type 01 class 0x060400 [ 5.066459] pci 0000:00:03.0: [11ab:6828] type 01 class 0x060400 [ 5.066542] PCI: bus0: Fast back to back transfers disabled [ 5.071642] usb 4-1: new high-speed USB device number 2 using xhci-hcd [ 5.078696] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.086726] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [...

...k [ 5.032397] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00 [ 5.038333] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 5.044625] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff] [ 5.051516] pci_bus 0000:00: root bus resource [bus 00-ff] [ 5.057214] PCI: bus0: Fast back to back transfers disabled [ 5.062318] usb 4-1: new high-speed USB device number 2 using xhci-hcd [ 5.069368] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 5.077397] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [...

Hello! At first, i want to run the latest HandBrake (version 0.93) on a Mac with Mac OS 10.4 (Tiger). The problem is, that Handbrake is developed for Mac OS 10.5 (XCode SDK is not compatible to Mac OS 10.4 one). So i decided to try it with wine/darwine. Because wine is better supported on Linux and you can get easier newer version (apt-get), i decided to run HandBrakeCLI.exe on Debian Etch

Hi list this is actually a problem on a debian system but I thought you might be interested to hear of it and perhaps can offer some help. I have a woody box (dell pe750, dual cpu) running a kernel from backports.org (debian 'testing' packages built on a 'stable' box). The kernel version is 2.6.7-1.backports.org.1. This host is hooked up to an Apple Xserve RAID with a 2.3Tbyte

On Monday 14 March 2005 06:29 pm, Mark Williamson wrote: > > I don''t know if this is the right place to post, but I can''t find any > > info about my problem on the net. > > Yes, this is the right place. > > > title Xen2610 > > kernel /boot/xen.gz dom0_mem=131072 console=vga > > module /boot/vmlinuz-2.6.10-xen0 root=/dev/hde1 ro console=tty0

Hi Ben, Thanks for your reply. My replies follow in between. Luís On Thu, Jan 25, 2018 at 5:40 AM, Ben Skeggs <skeggsb at gmail.com> wrote: > On 24 January 2018 at 06:19, Luís Mendes <luis.p.mendes at gmail.com> wrote: >> Hi Arnd, >> >> Sorry for sending this email directly to you, but maybe you can help >> me, or guide me where to look for. >>

The Geforce 9800GT also shows different behaviour without nvidiafb in the kernel. I get lengthy messages from nouveau, like the ones found in the email attachment. It also eventually gets into the lightdm login graphical screen, but with this card the screen is highly distorted, despite the mouse cursor being properly displayed and moving around properly. Luis On Thu, Jan 25, 2018 at 1:14 PM,

...) [ 4.952279] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00 [ 4.958215] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff] [ 4.964583] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff] [ 4.971474] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.977177] PCI: bus0: Fast back to back transfers disabled [ 4.982770] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 4.990794] pci 0000:00:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 4.999054] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=...

...otplug controller"); + pr_err("could not register cPCI hotplug controller\n"); goto init_hc_error; } - dbg("registered controller"); + dbg("registered controller\n"); /* Look for first device matching cPCI bus's bridge vendor and device IDs */ if(!(bus0_dev = pci_get_device(PCI_VENDOR_ID_DEC, @@ -248,24 +248,24 @@ static int zt5550_hc_init_one (struct pci_dev *pdev, const struct pci_device_id status = cpci_hp_register_bus(bus0, 0x0a, 0x0f); if(status != 0) { - err("could not register cPCI hotplug bus"); + pr_err("could not r...