search for: btrfs_block_group_data

...YSTEM, BTRFS_FIRST_CHUNK_TREE_OBJECTID, 0, BTRFS_MKFS_SYSTEM_GROUP_SIZE); - BUG_ON(ret); + if (ret) + goto err; if (mixed) { ret = btrfs_alloc_chunk(trans, root->fs_info->extent_root, &chunk_start, &chunk_size, BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA); - BUG_ON(ret); + if (ret) + goto err; ret = btrfs_make_block_group(trans, root, 0, BTRFS_BLOCK_GROUP_METADATA | BTRFS_BLOCK_GROUP_DATA, BTRFS_FIRST_CHUNK_TREE_OBJECTID, chunk_start, chunk_size); - BUG_ON(ret); + if (ret) + goto err; printf...

...rfs_statfs(struct dentry *dentry, struct kstatfs *buf) rcu_read_lock(); list_for_each_entry_rcu(found, head, list) { - if (found->flags & (BTRFS_BLOCK_GROUP_METADATA | - BTRFS_BLOCK_GROUP_SYSTEM)) - total_used_data += found->disk_total; - else + if (found->flags & BTRFS_BLOCK_GROUP_DATA) total_used_data += found->disk_used; + else + total_used_data += found->disk_total; total_used += found->disk_used; } rcu_read_unlock(); -- 1.7.2.3 -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger...

Here are 3 patches to avoid undesired aborts of mkfs.btrfs. These are based on top of Chris''s btrfs-progs.git: git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-progs.git Thanks, H.Seto Hidetoshi Seto (3): btrfs-progs: error if device for mkfs is too small btrfs-progs: error if device have no space to make primary chunks btrfs-progs: calculate available

...64 extra_flags = flags & (BTRFS_BLOCK_GROUP_RAID0 | BTRFS_BLOCK_GROUP_RAID1 | - BTRFS_BLOCK_GROUP_RAID5 | - BTRFS_BLOCK_GROUP_RAID6 | + BTRFS_BLOCK_GROUP_RAID56 | BTRFS_BLOCK_GROUP_RAID10 | BTRFS_BLOCK_GROUP_DUP); if (extra_flags) { if (flags & BTRFS_BLOCK_GROUP_DATA) - fs_info->avail_data_alloc_bits |= extra_flags; - if (flags & BTRFS_BLOCK_GROUP_METADATA) - fs_info->avail_metadata_alloc_bits |= extra_flags; - if (flags & BTRFS_BLOCK_GROUP_SYSTEM) - fs_info->avail_system_alloc_bits |= extra_flags; + avail = &fs_info->avail_dat...

...- ins->objectid < exclude_start + exclude_nr)) { - search_start = exclude_start + exclude_nr; - goto new_group; + block_group = list_entry(cur, struct btrfs_block_group_cache, + list); + search_start = block_group->key.objectid; + cur = cur->next; } - if (!(data & BTRFS_BLOCK_GROUP_DATA)) - trans->block_group = block_group; + /* we found what we needed */ + if (ins->objectid) { + if (!(data & BTRFS_BLOCK_GROUP_DATA)) + trans->block_group = block_group; - ins->offset = num_bytes; - if (last_ptr) { - *last_ptr = ins->objectid + ins->offset; - if (*last_...

...rfs_statfs(struct dentry *dentry, struct kstatfs *buf) rcu_read_lock(); list_for_each_entry_rcu(found, head, list) { - if (found->flags & (BTRFS_BLOCK_GROUP_METADATA | - BTRFS_BLOCK_GROUP_SYSTEM)) - total_used_data += found->disk_total; - else + if (found->flags & BTRFS_BLOCK_GROUP_DATA) total_used_data += found->disk_used; + else + total_used_data += found->disk_total; total_used += found->disk_used; } rcu_read_unlock(); -- 1.7.0.1 -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger...

...rfs_statfs(struct dentry *dentry, struct kstatfs *buf) rcu_read_lock(); list_for_each_entry_rcu(found, head, list) { - if (found->flags & (BTRFS_BLOCK_GROUP_METADATA | - BTRFS_BLOCK_GROUP_SYSTEM)) - total_used_data += found->disk_total; - else + if (found->flags & BTRFS_BLOCK_GROUP_DATA) total_used_data += found->disk_used; + else + total_used_data += found->disk_total; total_used += found->disk_used; } rcu_read_unlock(); -- 1.7.0.1 -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majordomo@vger...

Hello, This patch series adds an initial implementation of restriper (it''s a clever name for relocation framework that allows to do selective profile changing and selective balancing with some goodies like pausing/resuming and reporting progress to the user. Profile changing is global (per-FS) so far, per-subvolume profiles require some discussion and can be implemented in future.

...;= ~BTRFS_BLOCK_GROUP_RAID1; + flags |= BTRFS_BLOCK_GROUP_DUP; + } else if (flags & BTRFS_BLOCK_GROUP_RAID0) { + flags &= ~BTRFS_BLOCK_GROUP_RAID0; + } else + flags = ULLONG_MAX; + + return flags; +} + static u64 get_alloc_profile(struct btrfs_root *root, u64 flags) { if (flags & BTRFS_BLOCK_GROUP_DATA) @@ -3356,8 +3380,23 @@ again: } ret = btrfs_alloc_chunk(trans, extent_root, flags); - if (ret < 0 && ret != -ENOSPC) - goto out; + if (ret < 0) { + if (ret != -ENOSPC) + goto out; + + /* + * Degenerate the alloc profile: + * RAID10 -> RAID1 -> DUP + * RAID0...

In a multi device setup, the chunk allocator currently always allocates chunks on the devices in the same order. This leads to a very uneven distribution, especially with RAID1 or RAID10 and an uneven number of devices. This patch always sorts the devices before allocating, and allocates the stripes on the devices with the most available space, as long as there is enough space available. In a low

In a multi device setup, the chunk allocator currently always allocates chunks on the devices in the same order. This leads to a very uneven distribution, especially with RAID1 or RAID10 and an uneven number of devices. This patch always sorts the devices before allocating, and allocates the stripes on the devices with the most available space, as long as there is enough space available. In a low

...->reservation_progress++; - spin_unlock(&cache->space_info->lock); - } goto out; } pin: @@ -5180,8 +5193,8 @@ checks: search_start - offset); BUG_ON(offset > search_start); - ret = btrfs_update_reserved_bytes(block_group, num_bytes, 1, - (data & BTRFS_BLOCK_GROUP_DATA)); + ret = btrfs_update_reserved_bytes(block_group, num_bytes, + RESERVE_ALLOC); if (ret == -EAGAIN) { btrfs_add_free_space(block_group, offset, num_bytes); goto loop; @@ -5405,7 +5418,7 @@ int btrfs_free_reserved_extent(struct btrfs_root *root, u64 start, u64 len) ret = btrfs...

...->reservation_progress++; - spin_unlock(&cache->space_info->lock); - } goto out; } pin: @@ -5180,8 +5192,8 @@ checks: search_start - offset); BUG_ON(offset > search_start); - ret = btrfs_update_reserved_bytes(block_group, num_bytes, 1, - (data & BTRFS_BLOCK_GROUP_DATA)); + ret = btrfs_update_reserved_bytes(block_group, num_bytes, + RESERVE_ALLOC); if (ret == -EAGAIN) { btrfs_add_free_space(block_group, offset, num_bytes); goto loop; @@ -5405,7 +5417,7 @@ int btrfs_free_reserved_extent(struct btrfs_root *root, u64 start, u64 len) ret = btrfs...

...nlock(&fs_info->csum_root->accounting_lock); + + spin_lock(&fs_info->tree_root->accounting_lock); + num_bytes += btrfs_root_used(&fs_info->tree_root->root_item); + spin_unlock(&fs_info->tree_root->accounting_lock); +#endif + sinfo = __find_space_info(fs_info, BTRFS_BLOCK_GROUP_DATA); + spin_lock(&sinfo->lock); + data_used = sinfo->bytes_used; + spin_unlock(&sinfo->lock); + + sinfo = __find_space_info(fs_info, BTRFS_BLOCK_GROUP_METADATA); + spin_lock(&sinfo->lock); + meta_used = sinfo->bytes_used; + spin_unlock(&sinfo->lock); + + num_bytes = (...

Hello, This is the userspace part of restriper, rebased onto the new progs infrastructure. Restriper commands are located under ''balance'' prefix, which is now the top level command group. However to not confuse existing users ''balance'' prefix is also available under ''filesystem'': btrfs [filesystem] balance start btrfs [filesystem] balance

...in_unlock(&data_sinfo->lock); - return btrfs_check_metadata_free_space(root); + return 0; } /* @@ -3019,7 +3005,7 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans, * we keep a reasonable number of metadata chunks allocated in the * FS as well. */ - if (flags & BTRFS_BLOCK_GROUP_DATA) { + if (flags & BTRFS_BLOCK_GROUP_DATA && fs_info->metadata_ratio) { fs_info->data_chunk_allocations++; if (!(fs_info->data_chunk_allocations % fs_info->metadata_ratio)) @@ -3737,7 +3723,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *tra...

Hi Chris, this serie of patches updated the command "btrfs filesystem df". I update this command because it is not so easy to get the information about the disk usage from the command "fi df" and "fi show". This patch was the result of some discussions on the btrfs mailing list. Many thanks to all the contributors. From the man page (see 2nd patch): [...] The

The goal is to detect when drives start to get an increased error rate, when drives should be replaced soon. Therefore statistic counters are added that count IO errors (read, write and flush). Additionally, the software detected errors like checksum errors and corrupted blocks are counted. An ioctl interface is added to get the device statistic counters. A second ioctl is added to atomically get

If we have particularly full nodes, we could call btrfs_node_blockptr up to 32 times, which is 32 pairs of kmap/kunmap, which _sucks_. So go ahead and map the extent buffer while we look for readahead targets. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> --- fs/btrfs/ctree.c | 23 +++++++++++++++++++++-- 1 files changed, 21 insertions(+), 2 deletions(-) diff --git

Changes v1-v2: - Remove restriction that BTRFS_IOC_GET_DEVICE_STATS is a privileged operation - Cast u64 to unsigned long long for printf() Changes v2-v3: - Rebased on Chris'' current master Changes v3-v4: - Add padding at end of ioctl structure Changes v4-v5: - The statistic members in the ioctl are now organized as an array of 64 bit values. Symbolic names for the array indexes