search for: broadcoms

Does anyone have some tips for setting up Broadcom's 802.3AD support or just getting their driver compiled / installed? First off, I noticed redhat claims the broadcom bcm5708 driver has been added to the rhel4 kernel. But I don't see /proc/net/nicinfo which broadcom claims the driver creates when it's successfully initialized. So, I'm trying to build the driver based on the

I have a Broadcom 802.11b/g hardware on my dual-boot laptop. Note first that in the WinXP partition, the wifi makes DHCP connections to my router with no problem. Since this was not working in my new CentOS 6 partition, and remembering that there was a driver problem with the old Fedora partition it replaced, I followed instructions founs at:

Hi, I''m having problems using Xen (2.0.7 and 3.0.0) on newer IBM HS-20 blades, which uses Broadcom network card (tg3 kernel module). Here''s the relevant entry from lspci : 05:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704S Gigabit Ethernet (rev 10) 05:01.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704S Gigabit Ethernet (rev 10) If xend is

Hi all, I'm testing on debian/unstable SR-IOV feature with Broadcom BCM57810 cards and KVM hypervisor: Compiled against library: libvirt 1.2.1 Using library: libvirt 1.2.1 Using API: QEMU 1.2.1 Running hypervisor: QEMU 1.7.0 bnx2x -> firmware 7.8.17 -> driver from kernel 3.12.7 8 VFs are created on the first PF. For each VF, a specific mac address is set manually using "ip

Hello all. We recently purchased HP Proliant DL380 G7 server and also a HP Lefthand P4500 G2 24TB iSCSI box. The server itself has Quad Ethernet based on the BCM5709 Chipset from Broadcom (NetXtreme II). My main question is about iSCSI offload mechanism, as iSCSI itself is pretty new to me but I have gotten a good hold on it tho. I have managed to setup and configured our Lefthand box into

On 02/04/2014 05:10 PM, Yoann Juet wrote: > Hi all, > > I'm testing on debian/unstable SR-IOV feature with Broadcom BCM57810 > cards and KVM hypervisor: > > Compiled against library: libvirt 1.2.1 > Using library: libvirt 1.2.1 > Using API: QEMU 1.2.1 > Running hypervisor: QEMU 1.7.0 > > bnx2x > -> firmware 7.8.17 > -> driver from kernel 3.12.7 >

In this thread: http://syslinux.zytor.com/archives/2007-February/008014.html I reported that IBM Opteron servers with Broadcom BCM5780 chipsets would freeze randomly in the PXE menus from the SYSLINUX 3.35 tools vesamenu.c32 and menu.c32. There did not seem to be any reason for this nor systematics in when the servers would lock up. The solution is now available: Upgrade your IBM servers to

Hello, I''ve this strange problem. When Xen kernel start and it try to start eth devices, network doesn''t work. It seems to be a problem with NICs firmware. Anyone had this problem? Do you know where I can download firmware upgrade? (on DELL''s site I''ve just searched...) Thanks, Carlo No virus found in this outgoing message. Checked by AVG Free Edition.

Hello David, In brief, I've solved this problem on my Dell Inspiron 1525 (with Broadcom 4312 wireless card), so I figured letting You know would be nice, 'cause it didn't seem like the issue is resolved. Visit this link: http://jomcode.com/fadhil/?p=59 and in addition check out the comment on the same page by Andre Kiepe to have the modules load on boot. Best Regards, Milos.

Hi all, I'm a complete newbie in Linux and am trying to get my Broadcom BCM4313 working in my Lenovo S10-3t netbook (CentOS 6.3 installed from LiveCD). I followed the steps in the wiki, which lead me to ELRepo: wl-kmod. I followed the instructions there until Step 2: $ mkdir -p ~/rpmbuild/{BUILD,RPMS,SPECS,SOURCES,SRPMS} $ echo -e "%_topdir $(echo $HOME)/rpmbuild\n%dist .el$(lsb_release

Been experimenting with CentOS 5.4 some more. In order to get my wireless card to work (Broadcom BCM4311) I need Broadcom's wl.ko driver (http:// www.broadcom.com/support/802.11/linux_sta.php). It compiles fine after the necessary modification in typedef.h, loads and wireless works. However, as soon as I put some load on that interface (scp something from another machine, download

Everyone, I just purchased a new wfi card?that is identified as using lspci as : Broadcom Limited BCM4360 802.11ac Wireless Network Adapter (rev 03) I have not been able to get it to work Centos 7.4 machine. Some of the centos user posts had indicated the nux repsitory had a Centos 7 kmod- wl, but it is not present when I tried to search or or install it at this time. Has anyone had any

How do I back out of these directions?<br/><br/>"yum install iwl4965-firmware<br/><br/>rmmod iwl4965; modprobe iwl4965<br/><br/>Your wireless device should be working now. Enable NetworkManager to use it. <br/>Starting from CentOS 5.3 (kernel 2.6.18-128) the kernel includes the iwlagn kernel module. If you are running an older kernel, please look at

Hi, I just installed CentOS 6.6 on my HP Pavilion DM1 laptop. The wireless card is only poorly supported in the default setup, so I decided to write an installation script for the Linux-STA driver, which works perfectly. https://github.com/kikinovak/centos/blob/master/6.x/broadcom-sta/broadcom-sta.sh Grab the files: # git clone https://github.com/kikinovak/centos Run the script: # cd

Hello, Starting version PXELINUX 3.83 2009-10-05, i am not able to boot anymore using "localboot 0" entry. It show "" Booting from local disk... """ Then loop on the network boot of the interface then after a few try show the message: """ It appears your computer has less than 268K of low ("DOS") ... Boot failed: press a key to

> From: Edward Ned Harvey [mailto:shill at nedharvey.com] > > I have a Dell R710 which has been flaky for some time.? It crashes about once > per week.? I have literally replaced every piece of hardware in it, and > reinstalled Sol 10u9 fresh and clean. It has been over 3 weeks now, with no crashes, and me doing everything I can to get it to crash again. So I''m going to

Hi Folks I'm trying to get my internal WiFi working and I'm following the instructions here: https://wiki.centos.org/HowTos/Laptops/Wireless/Broadcom My adaptor is: [gary at gary ~]$ lspci|grep Broad 08:00.0 Network controller: Broadcom Limited BCM4352 802.11ac Wireless Network Adapter (rev 03) [gary at gary ~]$ However, I've failed at step 2 as I cannot find any Linux / STA /

Hi, I''ve run into the same issue as: http://lists.xensource.com/archives/html/xen-users/2006-07/msg00599.html In that, running the network bridge script kills networking completely, trying to ping the gateway gives me destination host unreachable. The card is: 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 11) Using the bnx2 module:

Hello all. Again I call upon the greats of this mailing list to help me with an issue related to MEMDISK - notably when paired with various Dell OptiPlex and Latitude systems. The issue presented itself sometime ago and I best dealt with it by remaining with version 3.83 of the SYSLINUX package. But valuing the improved changes fostered by newer versions, I would prefer to move forward with

From: Marc Carino <marc.ceeeee@gmail.com> Let Xen recognize the Broadcom Brahma-B15 CPU by adding the appropriate MIDR mask to the initialization phase. Further, ensure that the console output properly reports the CPU manufacturer as "Broadcom Corporation". Signed-off-by: Marc Carino <marc.ceeeee@gmail.com> --- xen/arch/arm/arm32/proc-v7.S | 8 ++++++++