search for: brkint

...line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc -ixany -imaxbel -iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke another query i had was on hidin...

...; line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; -parenb -parodd cs8 hupcl -cstopb cread clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr -icrnl -ixon -ixoff -iuclc -ixany -imaxbel -iutf8 -opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 -isig -icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke $ sudo cat /dev/ttyS0 $GPGLL,...

Hi, on my system (Linux 2.6.18.8 - ia64), if a domain write on the xencons before xenconsole is initialized the domain gets back what it wrote. This patch fixes this issue by making raw the pty slave very early. (I suppose it doesn''t happen with linux as a guest because it takes a little bit of time before writing to xencons). Tristan. _______________________________________________

...1 root nut 4, 64 Nov 23 14:13 /dev/ttyS0 # setserial -gav /dev/ttyS0 /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal skip_test # stty -F /dev/ttyS0 speed 2400 baud; line = 0; min = 1; time = 0; -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 665 bytes Desc: OpenPGP digital signature URL: <http://lists.alioth.de...

I setup a ssh chroot jail following this[1] guide. It works for my user to login, use ls and use scp which is all I really want. I do have a problem I cannot solve: when connected and navigating the filesystem, the backspace key actually moves the cursor forward and does not delete what I type. I may have found a hint from some googling that readline will read in /etc/inputrc on login but if

...line = 0; intr = ^C; quit = ^\; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; parenb parodd cs7 hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk inpck istrip -inlcr -igncr icrnl ixon ixoff -iuclc -ixany -imaxbel -iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon -iexten -echo echoe echok -echonl -noflsh -xcase -tostop -echoprt -echoctl echoke According to APC, the baud rate...

Hi. I spawned a thread last week about the failure of bridged networking and I have gotten a little further. Turns out that I _do_ have network connectivity from inside the domains, but I cannot get the network to come up when I boot. I have to login and start up the network manually. E.g. after installing Debian Sarge according to the debootstrap method outlined in the users manual, I created a

...[~]>stty -a -f /dev/cuaU0 speed 9600 baud; 0 rows; 0 columns; lflags: icanon isig iexten echo echoe -echok echoke -echonl echoctl -echoprt -altwerase -noflsh -tostop -flusho -pendin -nokerninfo -extproc iflags: -istrip icrnl -inlcr -igncr ixon -ixoff ixany imaxbel -ignbrk brkint -inpck -ignpar -parmrk oflags: opost onlcr -ocrnl tab0 -onocr -onlret cflags: cread cs8 -parenb -parodd hupcl clocal -cstopb -crtscts -dsrflow -dtrflow -mdmbuf cchars: discard = ^O; dsusp = ^Y; eof = ^D; eol = <undef>; eol2 = <undef>; erase = ^?; erase2 = ^H; intr = ^C;...

When running R from the terminal on Linux (Ubuntu 16.04), it core dumps whenever / wherever I press Ctrl-4 or Ctrl-\. You get thrown back to the terminal with "Quit (core dump)" being the only message. Grepping the R source code, it doesn't look like that message is generated by R itself. Over on Twitter, it has been confirmed to also happen on macOS. $ R -d valgrind --vanilla

...; t.c_lflag &= ~(ICANON | ISIG | IEXTEN | ECHO | ECHOE | ECHOK | ECHOKE | ECHONL | ECHOCTL | ECHOPRT | ALTWERASE | NOFLSH | TOSTOP | FLUSHO | PENDIN | NOKERNINFO | EXTPROC); t.c_iflag &= ~(ISTRIP | ICRNL | INLCR | IGNCR | IXON | IXOFF | IXANY | IMAXBEL | IGNBRK | BRKINT | INPCK | IGNPAR | PARM RK); t.c_oflag &= ~(OPOST | ONLCR | OCRNL | OXTABS | ONOEOT | ONOCR | ONLRET); t.c_cflag &= ~(CSIZE | CSTOPB | PARENB | CCTS_OFLOW | CRTS_IFLOW | CDTR_IFLOW | CDSR_OFLOW | CCAR_OFLOW); t.c_cflag |= (CS8); t.c_cc[V...

...; intr = ^c; quit = ^|; erase = ^h; kill = ^u; eof = ^d; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^q; stop = ^s; susp = ^z; dsusp = <undef>; rprnt = ^r; flush = ^o; werase = ^w; lnext = ^v; -parenb -parodd cs8 -cstopb hupcl cread -clocal -loblk -parext -ignbrk brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl -iuclc ixon -ixany -ixoff -imaxbel isig icanon -xcase echo echoe echok -echonl -noflsh -tostop echoctl -echoprt echoke -defecho -flusho -pendin iexten opost -olcuc onlcr -ocrnl -onocr -onlret -ofill -ofdel tab3 I have confirmed that these same p...

...ro 750. // THIS is is a trail of my tests on a SECOND computer - so this shows what you see if all DOES work well. // added user to dialout group and logged out and back in $ setserial -g /dev/ttyS0 /dev/ttyS0, UART: 16550A, Port: 0x03f8, IRQ: 4 $ stty -F /dev/ttyS0 speed 9600 baud; line = 0; -brkint -imaxbel $ sudo apt-get install nut Paketlisten werden gelesen... Fertig Abh?ngigkeitsbaum wird aufgebaut. Statusinformationen werden eingelesen.... Fertig Die folgenden zus?tzlichen Pakete werden installiert: libupsclient3 nut-client nut-server Vorgeschlagene Pakete: nut-monitor nut-cg...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Has anyone used nut with a XPCC UPS, in particular one of the XVRT units? Their supplied monitoring tool "works", but I'd really prefer to use nut if possible. I've systematically gone through each of the drivers in /lib/nut and none seem to talk with the unit properly. I'll be talking with a XPCC support person tomorrow, though

Hey, I''ve installed Xen 3.0 on a freshly installed Debian Sarge. dom0 is working nicely (kernel 2.6.12.6-xen0). Then I created a domU, again with Debian Sarge, booting Xen''s vmlinuz-2.6.12-xenU. Unfortunately ctrl-c does not work in the domU''s console, neither if I create the domU with "xm create -c ..." nor if I attach to it later. It doesn''t matter

Hello everyone, recently I've found something I consider a bug. Correct me if I'm wrong, but I always thought that Linux' EOL is 0x0A. Imagine my surprise when I saw that all messages that are being output on to the stderr (on any Linux I've tested - Fedora and Ubuntu) are terminated with 0x0D, 0x0A. Maybe that's standard behaviour of all stderr messages in all Linux

...quit = <undef>; erase = ^?; kill = ^U; eof = ^D; eol = <undef>; eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R; werase = ^W; lnext = ^V; discard = ^O; min = 1; time = 0; -parenb -parodd -cmspar cs8 -hupcl -cstopb cread -clocal -crtscts -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff -iuclc -ixany -imaxbel iutf8 opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0 isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt echoctl echoke -flusho -extproc This will prevent...

Turns out another user reported the same issue with a slightly different model: https://github.com/networkupstools/nut/issues/231 <https://github.com/networkupstools/nut/issues/231> The "stty -f /dev/cuaU0 raw" trick should help, but I am confused as to why FreeBSD has different "raw" settings than what is set up at the same time as the baud rate:

...+ + t->c_ispeed = t->c_ospeed = speed; +} + +/* + * Make a pre-existing termios structure into "raw" mode: character-at-a-time + * mode with no characters interpreted, 8-bit data path. + */ +void +cfmakeraw(t) + struct termios *t; +{ + + t->c_iflag &= +~(IMAXBEL|IXOFF|INPCK|BRKINT|PARMRK|ISTRIP|INLCR|IGNCR|ICRNL|IXON|IGNPAR); + t->c_iflag |= IGNBRK; + t->c_oflag &= ~OPOST; + t->c_lflag &= +~(ECHO|ECHOE|ECHOK|ECHONL|ICANON|ISIG|IEXTEN|NOFLSH|TOSTOP|PENDIN); + t->c_cflag &= ~(CSIZE|PARENB); + t->c_cflag |= CS8|CREAD; + t->c_cc[VMIN] = 1; + t->...

...; kill = ^U; eof = ^D; eol =<undef>; >> eol2 =<undef>; swtch =<undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = >> ^R; >> werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0; >> -parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts >> -ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon >> -ixoff >> -iuclc -ixany -imaxbel -iutf8 >> opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 >> vt0 >> ff0 >> isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop >&...

Im trying to run this program called Thinkboxx and wen it tryes to comunicate over the comm port it hangs. Here are som output to read. earlier on i get: Call kernel32.VirtualAlloc(43050000,00001000,00001000,00000004) ret=0058557c Ret kernel32.VirtualAlloc() retval=43050000 ret=0058557c thats from vhere the com port gets an virtual memory space, i think. and in the end i have: Call