search for: bri_te

Displaying 6 results from an estimated 6 matches for "bri_te".

Did you mean: bite
2008 Dec 30
5
Xorcom BRI state NOTOPEN
...never seen during my previous installations. I have a Xorcom device with 4 BRI and 8 FXS ports. I use ubuntu Linux and asterisk 1.4.22. Everything works fine but after some time zap channels disappear in asterisk. root at pbx1:~# cat /proc/zaptel/* Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" AMI/CCS NOTOPEN 1 XPP_BRI_TE/00/00/0 Clear NOTOPEN 2 XPP_BRI_TE/00/00/1 Clear NOTOPEN 3 XPP_BRI_TE/00/00/2 HDLCFCS (In use) NOTOPEN Span 2: XBUS-00/XPD-01 "Xorcom XPD #00/01: BRI_TE" AMI/CCS NOTOPEN 4 XPP_BRI_TE/00/01/0 Clear NOTOPEN 5 XPP_BRI_TE/00/01/1 Clear...
2007 Jun 25
1
Xorcom Bri 4 Port USB
...ny pointers you can give would be greatly appreciated. We are running Fedora 7. Kernel "Linux 2.6.21-1.3194.fc7 #1 SMP i686 i686 i386 GNU/Linux" (Standard Kernel with install) Device has jumpers all set to TE mode. /etc/init.d/zaptel.conf # Span 1: XBUS-00/XPD-00 "Xorcom XPD #0/0: BRI_TE" span=1,1,1,ccs,ami # termtype: te bchan=1-2 dchan=3 # Span 2: XBUS-00/XPD-08 "Xorcom XPD #0/8: BRI_TE" span=2,2,1,ccs,ami # termtype: te bchan=4-5 dchan=6 # Span 3: XBUS-00/XPD-10 "Xorcom XPD #0/16: BRI_TE" span=3,3,1,ccs,ami # termtype: te bchan=7-8 dchan=9 # Span 4: X...
2007 Jun 27
1
Zap dialling issues
...or internal users to transfer callers to exten => _5XX,1,MeetMe(${EXTEN},cMd) exten => _5XX,n,Hangup exten => 6000,1,Dial(zap/0418608609) /etc/asterisk/zapata.conf [channels] ;echocancel = yes ;transfer = yes callgroup=1 pickupgroup=1 ; Span 1: XBUS-00/XPD-00 "Xorcom XPD #0/0: BRI_TE" group=0,11 context=zapin switchtype = euroisdn signalling = bri_cpe channel => 1-2 ; Span 2: XBUS-00/XPD-08 "Xorcom XPD #0/8: BRI_TE" group=0,12 context=zapin switchtype = euroisdn signalling = bri_cpe channel => 4-5 ; Span 3: XBUS-00/XPD-10 "Xorcom XPD #0/16: BRI_...
2007 Jul 12
0
No subject
...init_card_3_30' Dec 30 21:42:09 wedekindpbx1 init_card_3_30: XBUS-01/UNIT-0: init_xhfc(0) Dec 30 21:42:15 wedekindpbx1 init_card_3_30: XBUS-01/UNIT-0: Ending '/usr/s= hare/zaptel/init_card_3_30' Dec 30 21:42:15 wedekindpbx1 kernel: [ 3753.955210] INFO-xpp: XBUS-01/XPD-0= 0: Initialized: BRI_TE Dec 30 21:42:15 wedekindpbx1 kernel: [ 3753.955220] INFO-xpp: XBUS-01/XPD-0= 1: Initialized: BRI_TE Dec 30 21:42:15 wedekindpbx1 kernel: [ 3753.955227] INFO-xpp: XBUS-01/XPD-0= 2: Initialized: BRI_TE Dec 30 21:42:15 wedekindpbx1 kernel: [ 3753.955233] INFO-xpp: XBUS-01/XPD-0= 3: Initialized: BRI_TE...
2011 Jun 01
10
busy hangup HDLC Bad FCS (8) on Primary D-channel
...4) seems the only one that seem to work anybody has a clue? much appreciated some gory details below, HARDWARE: D201GLY2 motherboard usb:001/002 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware DAHDI CONFIG: dahdi-channels.conf ; Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" (MASTER) group=0,11 context=from-pstn switchtype = euroisdn signalling = bri_cpe_ptmp channel => 1-2 context = default group = 63 ; Span 2: XBUS-00/XPD-01 "Xorcom XPD #00/01: BRI_TE" group=0,12 context=from-pstn switchtype = euroisdn signalling = bri_cpe_ptmp channel => 4-5 c...
2009 Nov 30
1
DAHDI - BRI - Astribank
...d by /usr/sbin/dahdi_genconf on Mon Nov 30 18:37:14 2009 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" (MASTER) AMI/CCS span=1,1,0,ccs,ami # termtype: te bchan=1-2 hardhdlc=3 echocanceller=mg2,1-2 # Span 2: XBUS-00/XPD-01 "Xorcom XPD #00/01: BRI_TE" AMI/CCS span=2,2,0,ccs,ami # termtype: te bchan=4-5 hardhdlc=6 echocanceller=mg2,4-5 # Global data loadzone = it defaultzone = it ***...