search for: brezinsky

I've noticed that Asterisk AGI scripts don't terminate when a call is answered. Does anyone know how to do this? I would think that this would be a very big problem, if the scripts stayed in memory, doing nothing, until the call terminates. Not only do you have to have a process for routing each call, but all the previous calls, that are still in progress, also have scripts running. It

...ng said. GBLX setup a tap and said we were not sending them any audio at all so we're fairly certain this problem is on our end and not theirs. We're at a loss here and can't really figure out what's wrong. Can someone provide some insight into this problem? Thanks -- ~Andy Brezinsky

Come on you carriers on the list... Give up the dibs what are you using and why? About to sledgehammer these SELECT * FROM GARBAGE WHERE SBC = 'nCite' Don't bother shooting me off Newport Networks stuff... Too pricey -- ==================================================== J. Oquendo http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x1383A743 echo infiltrated.net|sed

Hey all. We have a DS3 circuit with GBLX split off into 7 systems with a 4 port sangoma card (A104D) in the first 2 systems, and digium T410P cards in the other 5. GBLX numbers their spans from 0 to 3 instead of 1-4 and we have a NFAS configuration with the d-channel on chan 96. All of our systems are running 1.0.7 for stability reasons (and no good time for maintaince, the entire platform

Hello everyone, We have recently turned up a new T1 from McLeod (Midwestern CLEC). It is configured like so: /etc/zaptel.conf: loadzone=us defaultzone=us span=1,0,0,esf,b8zs ;(also tried 1,1,0,esf,b8zs) bchan=13-23 nethdlc=1-12 dchan=24 /etc/zapata.conf: switchtype=national context=pri-in signalling=pri_cpe group=1 channel => 13-23 I can get hdlc0 (and pvc0) up just fine after the