Displaying 6 results from an estimated 6 matches for "br_stp_recalculate_bridge_id".
2007 Apr 18
1
[Bridge] [BRIDGE] Unaligned access on IA64 when comparing ethernet addresses
From: Evgeny Kravtsunov <emkravts@openvz.org>
compare_ether_addr() implicitly requires that the addresses
passed are 2-bytes aligned in memory.
This is not true for br_stp_change_bridge_id() and
br_stp_recalculate_bridge_id() in which one of the addresses
is unsigned char *, and thus may not be 2-bytes aligned.
Signed-off-by: Evgeny Kravtsunov <emkravts@openvz.org>
Signed-off-by: Kirill Korotaev <dev@openvz.org>
Signed-off-by: Pavel Emelianov <xemul@openvz.org>
---
--- a/net/bridge/br_stp_if.c 200...
2007 Apr 18
5
[Bridge] Bridge MAC address
Sorry, if this question has been answered before, but I could not find
out with a brief look.
How can I set the MAC address for a bridge? The MAC address given for
the bridge device seems to be the one it sends network packets with if
the bridge device has an IP address set. Apparently the bridge starts
with a zero MAC address and when the first interface is attached to
it, it takes its MAC
2009 Aug 13
4
[Bridge] [PATCH] net/bridge: Add 'hairpin' port forwarding mode
This patch adds a 'hairpin' (also called 'reflective relay') mode
port configuration to the Linux Ethernet bridge kernel module.
A bridge supporting hairpin forwarding mode can send frames back
out through the port the frame was received on.
Hairpin mode is required to support basic VEPA (Virtual
Ethernet Port Aggregator) capabilities.
You can find additional information on VEPA
2009 Aug 13
4
[Bridge] [PATCH] net/bridge: Add 'hairpin' port forwarding mode
This patch adds a 'hairpin' (also called 'reflective relay') mode
port configuration to the Linux Ethernet bridge kernel module.
A bridge supporting hairpin forwarding mode can send frames back
out through the port the frame was received on.
Hairpin mode is required to support basic VEPA (Virtual
Ethernet Port Aggregator) capabilities.
You can find additional information on VEPA
2009 Aug 13
4
[Bridge] [PATCH] net/bridge: Add 'hairpin' port forwarding mode
This patch adds a 'hairpin' (also called 'reflective relay') mode
port configuration to the Linux Ethernet bridge kernel module.
A bridge supporting hairpin forwarding mode can send frames back
out through the port the frame was received on.
Hairpin mode is required to support basic VEPA (Virtual
Ethernet Port Aggregator) capabilities.
You can find additional information on VEPA
2007 Apr 18
7
[Bridge] (no subject)
Dear Sir,
I was trying to install bridge as we are installing
scps gateway in our testbed.This requires us to
install the bridge.
Our Linux version is 2.4.18 ~3 and we are using redhat
7.2
Please let me know which is the bridge I should
install and how to configure it.
Before configuring the bridge what I should check in
my configuration.
Thanks for your time,
Sincerely
Rama
=====
I hear