Displaying 20 results from an estimated 21 matches for "br100".
Did you mean:
r100
2009 Aug 11
9
can''t add vlans successfully
Hi,
I want to add 2 vlans by the following steps:
1. add the vlan interfaces:
vconfig add eth0 100 --vlan100
vconfig add eth0 101 --vlan101
2. modify the network-bridge script by the websit,
http://wiki.xensource.com/xenwiki/XenNetworking#head-04ebcc1760dbc4678e83b116afa310dc0612dc39
Comment each time ifup or ifdown commands are executed.The reason
is that ifdown ends with
2007 Apr 18
2
[Bridge] bridge-utils + Linksys WET11
...s are able to talk to each other.
When the WET11 is plugged in is when things start acting up. Every
client (including those behind the WET11) are able to connect out to the
internet, but clients cannot talk to each other. If Client A(port 1)
tries to connect to Client B(port 2), `brctl showmacs br100` shows that
Client B moved to port 4(port 4 is where the WET11 is plugged in. If I
change the WET11 port, the port Client B moves to is also changed), and
the router can no longer ping Client B.
[root@deadbeef root]# brctl showmacs br100
port no mac addr is local? ageing time...
2014 Apr 30
3
virsh update-device: need to clear network filters
Hi,
Can anyone please help with the following: I have a running instance with
interface
<interface type='bridge'>
<mac address='fa:16:3e:ba:a4:67'/>
<source bridge='br100/>
<target dev='vnet0'/>
<model type='virtio'/>
<filterref filter='nova-instance-instance-00000001-fa163ebaa467'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00' s...
2006 Oct 29
0
Native VLAN and bridging
Hi all,
Is it possible to have native VLAN (802.1q) and a VLAN x at the same time
in DOMU''s?
This is what I have configured on my DOM0 (xen2):
Eth0 (connected by a 801.1q trunk to Cisco 2950 switch)
Created vlan100 : vconfig eth0 100
Created bridge : brctl addbr br100
Attach switchport: brctl addif br100 eth0.100
Attach a DOMU : brctl addif br100 vif2.0
I now have bridge br100 with vlan 100 attached to a DOMU working fine.
However, when I want to use native VLAN, I just can''t put switchport eth0
in a bridge and do the same setup as listed before. T...
2010 Mar 10
9
Error starting stubdom HVM on Xen-3.4.3-rc4-pre
...: Wed Mar 10 08:46:50 EST 2010
xend_config_format : 4
AND the configuration file
kernel = "/usr/lib/xen/boot/hvmloader"
builder=''hvm''
memory = 1024
name = "router"
vcpus=1
pae=1
acpi=1
apic=1
vif = [ ''type=ioemu, mac=00:16:3e:11:11:01, bridge=br100'',
''type=ioemu, mac=00:16:3e:11:11:02, bridge=br101'',
''type=ioemu, mac=00:16:3e:11:11:03, bridge=br200'',
''type=ioemu, mac=00:16:3e:11:11:04, bridge=br300'',
''type=ioemu, mac=00:16:3e:11:11:05, brid...
2010 Mar 10
9
Error starting stubdom HVM on Xen-3.4.3-rc4-pre
...: Wed Mar 10 08:46:50 EST 2010
xend_config_format : 4
AND the configuration file
kernel = "/usr/lib/xen/boot/hvmloader"
builder=''hvm''
memory = 1024
name = "router"
vcpus=1
pae=1
acpi=1
apic=1
vif = [ ''type=ioemu, mac=00:16:3e:11:11:01, bridge=br100'',
''type=ioemu, mac=00:16:3e:11:11:02, bridge=br101'',
''type=ioemu, mac=00:16:3e:11:11:03, bridge=br200'',
''type=ioemu, mac=00:16:3e:11:11:04, bridge=br300'',
''type=ioemu, mac=00:16:3e:11:11:05, brid...
2014 May 01
0
Re: virsh update-device: need to clear network filters
...n 04/30/2014 05:01 PM, Oleg Bondarev wrote:
> Hi,
>
> Can anyone please help with the following: I have a running instance
> with interface
>
> <interface type='bridge'>
> <mac address='fa:16:3e:ba:a4:67'/>
> <source bridge='br100/>
> <target dev='vnet0'/>
> <model type='virtio'/>
> <filterref filter='nova-instance-instance-00000001-fa163ebaa467'/>
> <alias name='net0'/>
> <address type='pci' domain='0x0000&...
2015 Jun 11
2
Bridges, VLANs, Bonding on CentOS 7
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Hi,
some months ago I ran into a hassle with following, quite simple
config that works on CentOS 6 and CentOS 5 extremeley well, for years.
However, I have problems getting it running on CentOS 7.
,-- bond0.100 -- brbond0.100 -> (VMs)
eth0 (eno1 on C7) --. |
|--- bond0 ----|--
2008 Sep 24
1
[Bridge] bridge is not forwarding the packet
...an
understand it
properly.
>
> I am having setup of Linux box. In that box I am having one
Ethernet
interface eth0 and one wireless interface ath0. I have also
configured one vlan
port as eth0.100 with the
help of vconfig (vconfig add eth 100). Now I have
created two bridges br1 and br100. I have added eth0 into br1 so
br1 is having
only one interface. I have added ath0 and eth0.100 into br100.
Physically eth0
is connected to a switch which is configured to handle vlan 100.
DHCP server is
also running into that switch to provide IP address to wireless
stations. This
is all about...
2013 Jul 30
2
lxc-enter-namespace error: security model cannot be entered.
...<source dir='/opt/stack/data/nova/instances/f1ce5360-bb5e-4cfc-b5ef-d05f8db52618/rootfs'/>
<target dir='/'/>
</filesystem>
<interface type='bridge'>
<mac address='fa:16:3e:3a:c6:11'/>
<source bridge='br100'/>
<target dev='veth0'/>
<filterref filter='nova-instance-instance-00000007-fa163e3ac611'/>
</interface>
<console type='pty' tty='/dev/pts/1'>
<source path='/dev/pts/1'/>
<target type=...
2012 Mar 07
1
libvirt for spice
...<source
- Ignored:
file='/opt/stack/nova/nova/..//instances/instance-00000011/disk.local'/>
<target dev='vdb' bus='ide'/>
</disk>
<interface type='bridge'>
<source bridge='br100'/>
<mac address='02:16:3e:44:a1:dd'/>
<filterref
filter="nova-instance-instance-00000011-02163e44a1dd">
<parameter name="IP" value="10.0.0.2" />
<parameter name=&...
2012 Jul 24
1
How can I make sVirt work with LXC (libvirt-0.9.13)?
.../local/nova/instances/instance-0000001f/rootfs"/>
?? ? ?<target dir="/"/>
?? ?</filesystem>
?? ?<interface type="bridge">
?? ? ?<mac address="fa:16:3e:1e:33:f4"/>
?? ? ?<model type="virtio"/>
?? ? ?<source bridge="br100"/>
?? ? ?<filterref filter="nova-instance-instance-0000001f-fa163e1e33f4">
?? ? ? ?<parameter name="IP" value="10.0.0.4"/>
?? ? ? ?<parameter name="DHCPSERVER" value="10.0.0.3"/>
?? ? ? ?<parameter name="PROJNET&quo...
2015 Jun 11
0
Bridges, VLANs, Bonding on CentOS 7
...-- brbond0.101 -> (VMs)
> eth1 (eno2 on C7) --? |
> `-- bond0.n ---- brbond0.102 -> (VMs)
>
> Any idea, what's the difference between C5/C6 and CentOS 7?
>
wild guess, can you try naming the bridge without using '.' (br100)
else send you config file to the list
> Best,
>
> Timo
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2
>
> iF4EAREIAAYFAlV5UHYACgkQuSPmkPhAW0qvSgD/aSybtfIG6Uy1da+zdJNNK7Ol
> fH2XG6We/FjakF102yUA/Ahbqk525/kP0kiq1/u9C2O5prnpjY9wIrYYUt/LU9nG
> =lcgL
> -----END...
2013 Jul 30
0
Re: lxc-enter-namespace error: security model cannot be entered.
.../opt/stack/data/nova/instances/f1ce5360-bb5e-4cfc-b5ef-d05f8db52618/rootfs'/>
> <target dir='/'/>
> </filesystem>
> <interface type='bridge'>
> <mac address='fa:16:3e:3a:c6:11'/>
> <source bridge='br100'/>
> <target dev='veth0'/>
> <filterref filter='nova-instance-instance-00000007-fa163e3ac611'/>
> </interface>
> <console type='pty' tty='/dev/pts/1'>
> <source path='/dev/pts/1'/>...
2012 Nov 07
1
libvirt with lxc: internal error The 'cpuacct', 'devices' & 'memory' cgroups controllers must be mounted
...t;>
<source
dir="/home/stack/nova_state/instances/instance-00000032/rootfs"/>
<target dir="/"/>
</filesystem>
<interface type="bridge">
<mac address="fa:16:3e:73:67:54"/>
<source bridge="br100"/>
<filterref filter="nova-instance-instance-00000032-fa163e736754">
<parameter name="IP" value="10.0.0.8"/>
<parameter name="DHCPSERVER" value="10.0.0.1"/>
<parameter name="PROJNET&quo...
2013 Apr 25
0
libvirt_lxc start problem when selinux enbale
...'>
<source dir='/home/stack/nova_state/instances/instance-00004bd6/rootfs'/>
<target dir='/'/>
</filesystem>
<interface type='bridge'>
<mac address='fa:16:3e:09:00:a2'/>
<source bridge='br100'/>
<filterref filter='nova-instance-instance-00004bd6-fa163e0900a2'>
<parameter name='DHCPSERVER' value='10.0.0.1'/>
<parameter name='IP' value='10.0.0.11'/>
<parameter name='PROJMASK' valu...
2013 Apr 25
0
答复: libvirt_lxc start problem when selinux enbale
...'>
<source dir='/home/stack/nova_state/instances/instance-00004bd6/rootfs'/>
<target dir='/'/>
</filesystem>
<interface type='bridge'>
<mac address='fa:16:3e:09:00:a2'/>
<source bridge='br100'/>
<filterref filter='nova-instance-instance-00004bd6-fa163e0900a2'>
<parameter name='DHCPSERVER' value='10.0.0.1'/>
<parameter name='IP' value='10.0.0.11'/>
<parameter name='PROJMASK' valu...
2013 Jul 15
2
Re: Hotplug of disk devices in LXC failed with libvirt of version 1.0.2
Hi, Gao Feng
I've tried what you said, but still exists the problem:
ubuntu@lxc:~$ vir attach-disk instance-0000002c /dev/dm-0 sdb
error: Failed to attach disk
error: Unable to create device /proc/10366/root/dev/sdb: Permission denied
I think finding what it means by saying 'Unable to create device /proc/10366/root/dev/sdb: Permission denied' is the key.
But anyway, thanks for
2013 Jul 16
2
Re: Hotplug of disk devices in LXC failed with libvirt of version 1.0.2
...lt;source
dir='/opt/stack/data/nova/instances/cf76c280-ac9c-44a6-94e3-237b46a7a68b/rootfs'/>
<target dir='/'/>
</filesystem>
<interface type='bridge'>
<mac address='fa:16:3e:7a:1b:c8'/>
<source bridge='br100'/>
<target dev='veth0'/>
<filterref filter='nova-instance-instance-0000002b-fa163e7a1bc8'/>
</interface>
<console type='pty' tty='/dev/pts/2'>
<source path='/dev/pts/2'/>
<target ty...
2012 Nov 08
1
OpenStack+libvirt+lxc: lxcContainerGetSubtree:1199 : Failed to read /proc/mounts
...hrough'>
<source
dir='/home/stack/nova_state/instances/instance-00000077/rootfs'/>
<target dir='/'/>
</filesystem>
<interface type='bridge'>
<mac address='fa:16:3e:40:ec:11'/>
<source bridge='br100'/>
<filterref filter='nova-instance-instance-00000077-fa163e40ec11'>
<parameter name='DHCPSERVER' value='10.48.253.1'/>
<parameter name='IP' value='10.48.253.2'/>
<parameter name='PROJMASK' val...