Displaying 20 results from an estimated 50 matches for "bootpc".
Did you mean:
bootp
2017 Jul 19
1
Re: SSH from host to domain using hostname
...y understanding this confirms DHCP request of guest / domain:
ld4004:~ # tcpdump -r /tmp/virbr0.pcap
reading from file /tmp/virbr0.pcap, link-type EN10MB (Ethernet)
17:10:31.433263 IP6 :: > ff02::16: HBH ICMP6, multicast listener report v2, 1 group record(s), length 28
17:10:31.434772 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 52:54:00:31:dd:59 (oui Unknown), length 300
17:10:31.435007 IP 192.168.100.1.bootps > 192.168.100.52.bootpc: BOOTP/DHCP, Reply, length 313
17:10:31.513284 IP6 :: > ff02::16: HBH ICMP6, multicast listener report v2, 2 group record(s), lengt...
2010 Apr 30
1
PXE boot from KVM VM is very slow
...0.0.5.187
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on virbr1, link-type EN10MB (Ethernet), capture size 96 bytes
17:57:29.809278 IP 10.0.5.50 > 10.0.5.187: ICMP echo request, id 189,
seq 0, length 28
17:57:30.181841 IP 10.0.5.50.bootps > 10.0.5.187.bootpc: BOOTP/DHCP,
Reply, length: 300
17:57:32.744740 IP 10.0.5.187.bootpc > 255.255.255.255.bootps:
BOOTP/DHCP, Request from 00:95:12:7e:ee:71 (oui Unknown), length: 548
17:57:32.755528 IP 10.0.5.50.bootps > 10.0.5.187.bootpc: BOOTP/DHCP,
Reply, length: 300
17:57:32.782129 arp who-has 10.0.5.25 te...
2007 Apr 18
1
[Bridge] Strange DHCP behaviour with bridging
...idge works perfecly (so I think the problem is not
OpenVPN-related). If I start a DHCPd on the server and I configure the remote
client to get the IP from it, something strange happens: if I "sniff" on the
br0 interface, I can see the DHCP requests coming from the client (from
0.0.0.0.bootpc to 255.255.255.bootps) and the DHCPd answers going back from
ip.of.the.server.bootps to 255.255.255.255.bootpc; also sniffing on eth0
gives the same result, but if I sniff on the tap0 interface, I don't see the
replies! So the client never get its own IP. What I'm doing wrong? To add
so...
2014 Mar 05
3
Cannot chain to another PXE server on the same subnet
----- Original Message -----
From: Gene Cumm <gene.cumm at gmail.com>
> It's been a while since I used Yahoo but I didn't think I had
> that issue.? GMail does default to top-posting
Doing it manually... didn't find that option.
> Perhaps also try -o 43.x=01:04:0a:d7:90:3c:ff (which will set the
> mtftp option) in addition to -W.
Tried it but still the same error.
2003 Feb 03
1
Problems booting PXE-Client
...,linux,Linux install
# tftpd base dir
tftpdbase=/tftpboot
# domain name
domain=robonet.at
And under /home/clients is installed a full distribution.
The boot process is as follows:
Client: DHCP Discover
Server: DHCP Offer
Client: DHCP Request
Server: DHCP ACK
Client: ARP
Server: ARP
Client: UDP bootpc->4011 (PXE - The packet seems to be ok.)
Server: UDP 4011->bootpc (PXE - The packet seems to be ok.)
And just here the boot process hangs. The client repeats the pxe-requests 2
times then it repeats the dhcp-requests and then it repeats the
pxe-requests...
What's wrong with my configu...
2014 Mar 05
3
Cannot chain to another PXE server on the same subnet
This is what I'm seeing on my DHCP server:
# tcpdump -i eth0 -vvv -s 1500 '(port 67 or port 68)'
tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 1500 bytes
13:24:05.679950 IP (tos 0x0, ttl? 20, id 0, offset 0, flags [none], proto: UDP (17), length: 576) 0.0.0.0.bootpc > 255.255.255.255.bootps: [udp sum ok] BOOTP/DHCP, Request from 00:24:54:d9:d4:2f (oui Unknown), length 548, xid 0x55d9d42f, secs 4, Flags [ Broadcast ] (0x8000)
????????? Client-Ethernet-Address 00:24:54:d9:d4:2f (oui Unknown)
????????? Vendor-rfc1048 Extensions
??????????? Magic Cookie 0x63825...
2004 Nov 11
2
PXELINUX - no boot file found
...96 Nov 11 15:15 pxelinux.cfg
/tftpboot/pxelinux.cfg/default
# Perform local boot by default
default local
# Always prompt
prompt 1
# Display boot message
display pxeboot.msg
# Boot after 30 seconds
timeout 300
label local
kernel linux
localboot 0
tcpdump -i eth0
16:05:14.643828 0.0.0.0.bootpc > 255.255.255.255.bootps: xid:0x4c34d1a
secs:4 flags:0x8000 vend-rfc1048 DHCP:DISCOVER
PR:SM+DG+DG+IEN+NS+RL+HN+BS+DN+SS+RP+EP+VO+SID+VC+BF+T-128+T-127+T-126+T-125
+T-124+T-123+T-122+T-121 MSZ:1260
GUID:0.153.126.147.29.61.6.213.17.168.0.172.205.241.234.57.29 ARCH:0
NDI:1.2.1
VC:80.88.69.67.108...
2003 Jun 15
6
pxelinux bootup problems on EPIA-M
...ch type of linux).
I'm trying to boot the system from the network and it seems to
be getting to downloading pxelinux.0 but then nothing happens
after that....
I'm using ISC dhcpd V3.0pl2, tftp-hpa 0.34 and pxelinux 2.04.
Here is a tcpdump of what's happening:
21:59:14.792397 0.0.0.0.bootpc > 255.255.255.255.bootps: xid:0x64c4edbb
secs:4
flags:0x8000 [|bootp]
21:59:14.793743 sole2.bootps > 255.255.255.255.bootpc: xid:0x64c4edbb
secs:4 fl
ags:0x8000 Y:musica S:sole2 [|bootp] [tos 0x10]
21:59:16.795384 0.0.0.0.bootpc > 255.255.255.255.bootps: xid:0x64c4edbb
secs:4
flags:0x80...
2005 Feb 06
0
dhcrelay on router
...lso connects to adept the DHCP (172.16.1.7). This net (172.16.1.0) shall be
connected to 172.16.2.0 using the other NIC 172.16.2.1 (eth0, not in DNS).
Attached to it is my WLAN access point (ymir, 172.16.2.12). And this is what
happens:
#> dhcrelay -i eth0 adept.mgr
#> tcpdump -i any port bootpc or port bootps
09:42:09.996479 172.16.1.12.bootpc > 255.255.255.255.bootps: xid:0x960f0000
flags:0x8000 [|bootp]
09:42:09.997009 surtur.mgr.bootps > adept.mgr.bootps: (request) xid:0x960f0000
flags:0x8000 G:172.16.2.1 ether 0:9:5b:68:19:fb [|bootp] (DF)
09:42:09.997603 adept.mgr.bootps &g...
2008 Apr 04
8
DHCP and DomUs: not working
...ere''s no general networking problem.
I use the xen 3.2 packages for CentOS on CentOS 5.1.
There was a public IP address on eth0 and a private IP address on eth0:0.
I changed that around after I discovered with tcpdump that dhcpd was
replying on eth0 like publicip.bootps -> privateip.bootpc. This isn''t a
problem for all other packets, but apparently for DHCP.
Bridging is setup with the standard Xen 3.2 network-bridge script by xend
like this:
bridge name bridge id STP enabled interfaces
eth0 8000.000c6e101f84 no vif3.0...
2003 Apr 13
2
Problem in getting tftp transfer to succeed
...d it works.
Now when I try to load pxelinux.0 with the Acer PXE client I get the
following error: Missing mode.
Here is the packet trace ...
[xserve:/usr/libexec] yves% sudo tcpdump -i en0 -s 0 -X host
192.168.1.10
tcpdump: listening on en0
10:42:49.273193 192.168.1.1.bootps > 192.168.1.10.bootpc:
xid:0x40ab183f flags:0x8000 Y:192.168.1.10 S:192.168.1.1 sname "xserve"
vend-rfc1048 DHCP:OFFER SID:192.168.1.1 LT:3564 SM:255.255.255.0
DG:192.168.1.1 NS:192.168.1.1 DN:"" BF:"/private/tftpboot/pxelinux.0"
0x0000 4500 014e e4d4 0000 ff11 526e c0a8 0101...
2020 Feb 27
1
Problem with PXE/UEFI
Hi Guys,
i have a problem with PXE/UEFI Boot.
Legacy PXE Boot is working fine.
I use Dnsmasq with integrated tftp.
As Mentioned above, legacy pxe boot is working fine, tcpdump shows:
--- start tcpdump legacy pxe boot ---
13:44:16.589197 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from f8:ca:b8:06:7d:ed (oui Unknown), length 548
13:44:20.543910 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from f8:ca:b8:06:7d:ed (oui Unknown), length 548
13:44:20.570008 ARP, Request who-has dhcp.localdomain tell 172.22.135...
2020 Sep 04
2
Re: network config not working on newer libvirt
Greetings Laine,
> You haven't said which distro, nor what is the libvirt exact libvirt
> version (probably won't matter in this case, but in general "libvirt
> x.y.z" is more useful than "latest stable libvirt").
you are correct, the previous os was debian 10 with libvirt 3, the new os is gentoo with libvirt 6.2.0
>
> If you have full connectivity
2009 Jul 19
5
How to disable checksum offloading for OSOL DomU via kmdb at initial boot ?
Adding -kd to extra line drops me to kmdb :-
root@ServerJaunty:/home/boris/nevada# xm create -c osol.install
Using config file "./osol.install".
Started domain osol.install (id=4)
Loading kmdb...
Welcome to kmdb
Loaded modules: [ unix krtld genunix ]
[0]>
I want patch kernel like it happens when adding to /etc/system:-
set xnf:xnf_cksum_offload = 0
2015 Sep 11
2
pxelinux tries to load ldlinux.c32 from DHCP server, instead of next-server
...on the current master everything is working
fine. This was with tested against 26d37f75aff50879795692728dbeb8ca57a8a226.
We're not using uefi for this test. (The machine is actually a KVM
instance in OpenStack.)
I've captured the following DHCP ACK:
10.141.20.1.bootps > 10.141.20.2.bootpc: [udp sum ok] BOOTP/DHCP, Reply,
length 399, xid 0xf0eb955a, secs 14, Flags [none] (0x0000)
Your-IP 10.141.20.2
Server-IP 10.141.255.254
Client-Ethernet-Address fa:16:3e:08:31:b9
Vendor-rfc1048 Extensions
Magic Cookie 0x63825363...
2020 Sep 04
0
Re: network config not working on newer libvirt
...e
> > DHCP server). Once you find the point that the packet is blocked, you'll
> > be better able to determine why.
> >
> >
>
> alright, I'll try that, thanks.
>
I've ran tcpdump on the vm's tap device, here is what I see:
01:42:15.404754 IP 0.0.0.0.bootpc > 255.255.255.255.bootps: BOOTP/DHCP, Request from 52:54:00:5a:4c:8c (oui Unknown), length 548
01:42:15.405075 IP Broadcom.Home.bootps > 10.0.0.40.bootpc: BOOTP/DHCP, Reply, length 300
01:42:15.735893 STP 802.1d, Config, Flags [none], bridge-id 8000.52:54:00:6b:1b:92.8003, length 35
01:42:17....
2013 Feb 12
0
A workaround to dhclient problems
Summary: if you have C5 guests with dhclient "bad udp checksum" issues
then this entry on the host will fix it:
iptables -A POSTROUTING -t mangle -p udp --dport bootpc -j CHECKSUM --checksum-fill
Detail:
If anyone else is seeing this...
Feb 11 19:22:11 mercury dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67 (xid=0x63be132a)
Feb 11 19:22:56 mercury last message repeated 3 times
Feb 11 19:23:12 mercury dhclient: DHCPREQUEST on eth0 to 255.255.255.255 po...
2015 Sep 12
2
pxelinux tries to load ldlinux.c32 from DHCP server, instead of next-server
On 2015-09-12 04:58, Gene Cumm wrote:
>> I've captured the following DHCP ACK:
>>
>> 10.141.20.1.bootps > 10.141.20.2.bootpc: [udp sum ok] BOOTP/DHCP, Reply,
>> length 399, xid 0xf0eb955a, secs 14, Flags [none] (0x0000)
>> Your-IP 10.141.20.2
>> Server-IP 10.141.255.254
>> Client-Ethernet-Address fa:16:3e:08:31:b9
>> Vendor-rfc1048 Extensions
>&...
2005 Mar 18
2
Trouble getting a DHCP address when booting.
Hi.
I spawned a thread last week about the failure of bridged networking and
I have gotten a little further. Turns out that I _do_ have network
connectivity from inside the domains, but I cannot get the network to
come up when I boot. I have to login and start up the network manually.
E.g. after installing Debian Sarge according to the debootstrap method
outlined in the users manual, I created a
2010 Dec 31
2
centos as a firewall help
...DROP)
target???? prot opt source?????????????? destination????????
ACCEPT???? all? --? anywhere???????????? anywhere??????????? state RELATED,ESTABLISHED
In_RULE_0? all? --? anywhere???????????? 172.16.2.14????????
In_RULE_2? udp? --? 192.168.57.1???????? anywhere??????????? udp multiport dports bootpc,bootps state NEW
Chain FORWARD (policy DROP)
target???? prot opt source?????????????? destination????????
ACCEPT???? all? --? anywhere???????????? anywhere??????????? state RELATED,ESTABLISHED
Chain OUTPUT (policy DROP)
target???? prot opt source?????????????? destination????????
ACCEPT???? a...