search for: bootopt

I use xen 4.0(dom0 is suse11.sp1,2.6.32 x86_64) on Dell R710 with PERC H700 RAID adapter. --Intel(R) Xeon(R) CPU E5620 @ 2.40GHz --8 CPU cores. --Memory 64G --RAID5 4.5T When I dedicated (pin) a CPU core only for dom0 use. (I specify "dom0_max_vcpus=1 dom0_vcpus_pin" options for Xen) I got dom0 kernel panic error(pin-1-5.30.bmp) When I pin 2 core to dom0, the dom0 system can boot up,

greetings does the list at this url cover *all* options or are there some hidden or newer ones by chance? http://www.centos.org/docs/4/html/rhel-ig-x8664-multi-en-4/ap-bootopts.html i am playing with CentOS 4 on some Compaq dual PIII hardware. The first unit is an 1850R with dual 500Mhz. If you need more info please let me know. it is a basic unit with raid controller and a Gig of DRAM etc. may i ask what others are putting in their "additional boot options"...

Hi all, I am testing new kernel on a mips machine (64 bits for kernel, 32 bits userland) and I found a problem when mounting the root file system. It is an ext3 file system that is correctly mounted as read only. While booting the system remount the file system as read/write and keep starting all daemons. Moving from 2.6.26 to 2.6.30 kernel, I get this error while remounting the file system

...dumpsys(); 317 318 /* Now that we're going to really halt the system... */ 319 EVENTHANDLER_INVOKE(shutdown_final, howto); 320 (kgdb) up #2 0xc0151020 in poweroff_wait (junk=0xc02794ec, howto=-1071149073) at /usr/src/sys/kern/kern_shutdown.c:595 595 boot(bootopt); (kgdb) list 590 591 #if defined(DDB) 592 if (debugger_on_panic) 593 Debugger ("panic"); 594 #endif 595 boot(bootopt); 596 } 597 598 /* 599 * Support for poweroff delay. (kgdb) up 1 #3 0xc0242283 in trap_fatal (frame=0xdf0...

...me=0 on the kernel boot for the installed system. PXE boot options: label c6inst-sda kernel /linux-boot/cent6-x64/vmlinuz append initrd=/linux-boot/cent6-x64/initrd.img ksdevice=bootif ip=dhcp ks=http://xx.xx.xx.xx/install/linux/ks/basic-cent6-sda.cfg ipappend 2 In kickstart: BOOTOPTS="biosdevname=0" Also in kickstart I do not specify the config for ANY network interfaces. I let anaconda pull in only the config for the boot interface from PXE. I manually configure everything else. The only thing I do to non-boot interfaces is set the DHCP and ONBOOT to no....

I did see your post. So, even though the sha256sum was perfect on the iso file and on the DVD, it failed to install. I then used a usb flash drive and booted the flash drive to do the install. It also failed. The screen image I took with my camera can be viewed at https://www.sendspace.com/file/4828ej The questions I have are: why VNC ??? VNC is a horribly insecure protocol. Why would I want

...display is :0 > > This is a horribly broken ISO spin. Looked at your image. It appears the graphical installation failed to start. Did you read the text? Did you try the suggestion? I'll retype it here: * if the graphical installation fails to start, try again with the inst.text bootoption to start text installation I suspect that for whatever reason, the graphical installer is failing on your laptop, probably because it doesn't support your video card. Try the text-based installer. Sadly, laptops are so varied its quite often that the video hardware simply isn't support...

Hi, I'm trying to get isolinux work with serial console; however, I fail. My means of testing is qemu -serial stdio -cdrom the.iso; when I use bootoption 'console=ttyS0', the linux kernel has no problems writing to serial and the serial output does appear in the terminal I've run qemu from, so I believe qemu is working alright in this regard. I've also had it working with _similar_ configuration, however, I failed to repeat such...

Hi all.... I had posted hte following on teh centos forums, and thought there might be additional people in here who do not browse those forum, so after 4 days I am posting over here as well (sorry for the double - but figured after 4 days it was safe to do so). Hi there.... I am trying to make a custom centos server cd that will essentially do the following: throw the disk in, boot the machine,

...t;> label c6inst-sda >> kernel /linux-boot/cent6-x64/vmlinuz >> append initrd=/linux-boot/cent6-x64/initrd.img ksdevice=bootif >> ip=dhcp ks=http://xx.xx.xx.xx/install/linux/ks/basic-cent6-sda.cfg >> ipappend 2 >> >> In kickstart: >> >> BOOTOPTS="biosdevname=0" >> >> Also in kickstart I do not specify the config for ANY network >> interfaces. >> I let anaconda pull in only the config for the boot interface from >> PXE. I >> manually configure everything else. The only thing I do to non-b...

...> > PXE boot options: > > label c6inst-sda > kernel /linux-boot/cent6-x64/vmlinuz > append initrd=/linux-boot/cent6-x64/initrd.img ksdevice=bootif > ip=dhcp ks=http://xx.xx.xx.xx/install/linux/ks/basic-cent6-sda.cfg > ipappend 2 > > In kickstart: > > BOOTOPTS="biosdevname=0" > > Also in kickstart I do not specify the config for ANY network interfaces. > I let anaconda pull in only the config for the boot interface from PXE. I > manually configure everything else. The only thing I do to non-boot > interfaces is set the DHCP an...

...a horribly broken ISO spin. > Looked at your image. > > It appears the graphical installation failed to start. Did you read > the text? Did you try the suggestion? I'll retype it here: > > * if the graphical installation fails to start, try again with the > inst.text bootoption to start text installation > > I suspect that for whatever reason, the graphical installer is failing > on your laptop, probably because it doesn't support your video card. > Try the text-based installer. Sadly, laptops are so varied its quite > often that the video hardware...

...kgdb) (kgdb) bt full #0 doadump () at pcpu.h:165 No locals. #1 0xc054d419 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:410 first_buf_printf = 1 #2 0xc054d7e6 in panic (fmt=0xc0736da9 "%s") at /usr/src/sys/kern/kern_shutdown.c:566 td = (struct thread *) 0xc6bf0300 bootopt = 260 newpanic = 0 ap = 0xc6bf0300 "`???????" buf = "page fault", '\0' <repeats 245 times> #3 0xc071822c in trap_fatal (frame=0xe5928bc0, eva=0) at /usr/src/sys/i386/i386/trap.c:838 code = 40 ss = 40 esp = 0 type = 12 softseg = {ssd_base = 0, ssd_...

...dumpsys () at /usr/src/sys/kern/kern_shutdown.c:487 error = 0 #1 0xc0171ddb in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:316 howto = 260 #2 0xc0172200 in poweroff_wait (junk=0xc032454c, howto=-1070448561) at /usr/src/sys/kern/kern_shutdown.c:595 fmt = 0xc032454c "%s" bootopt = 260 buf = "page fault", '\000' <repeats 245 times> #3 0xc02d0976 in trap_fatal (frame=0xc032d134, eva=48) at /usr/src/sys/i386/i386/trap.c:974 frame = (struct trapframe *) 0x104 code = -1070447284 type = 12 ss = -1070447284 esp = 0 softseg = {ssd_base = 0, ssd_limi...

Hi, I have been trying to install Centos 4.4 on my laptop with no success. I have just purchased a new Acer 5100 laptop with AMD Turion 64x2 1Gig ram 120Gig HD. I have tried the 64bit and the 32 bit versions but have the same problem with both of them. I can do the complete install but when the computer reboot it will hang on the hardware detection on the network right after where it says

..._ep = (struct eventhandler_entry *) 0x0 _el = (struct eventhandler_list *) 0xfffffe0004813880 first_buf_printf = 1 #2 0xffffffff8090dea7 in panic (fmt=0x1 <Address 0x1 out of bounds>) at /usr/src/sys/kern/kern_shutdown.c:637 td = (struct thread *) 0x1 bootopt = <value optimized out> newpanic = <value optimized out> ap = {{gp_offset = 16, fp_offset = 48, overflow_arg_area = 0xffffff80e7d402b0, reg_save_area = 0xffffff80e7d401d0}} panic_cpu = 0 buf = "privileged instruction fault", '\0' <rep...

...ow the output of bt full: (kgdb) bt full #0 doadump () at pcpu.h:165 No locals. #1 0xc068d10e in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:399 first_buf_printf = 1 #2 0xc068d680 in panic (fmt=0xc090c16a "sbdrop") at /usr/src/sys/kern/kern_shutdown.c:555 bootopt = 260 newpanic = 0 buf = "sbdrop", '\0' <repeats 249 times> #3 0xc06d266c in sbdrop_locked (sb=0xc20aca84, len=1) at /usr/src/sys/kern/uipc_socket2.c:1157 m = (struct mbuf *) 0x0 next = (struct mbuf *) 0x0 #4 0xc06d3d93 in sbdrop (sb=0xc...

...cent6-x64/vmlinuz >>>> append initrd=/linux-boot/cent6-x64/initrd.img ksdevice=bootif >>>> ip=dhcp ks=http://xx.xx.xx.xx/install/linux/ks/basic-cent6-sda.cfg >>>> ipappend 2 >>>> >>>> In kickstart: >>>> >>>> BOOTOPTS="biosdevname=0" >>>> >>>> Also in kickstart I do not specify the config for ANY network >>>> interfaces. >>>> I let anaconda pull in only the config for the boot interface from >>>> PXE. >>>> I >>>> m...

Xen 3.4 xen-unstable.hg from yesterday with debian etch on 64bit arch Intel/Lenovo Q35 Mainboard with VT-d enabled Bootoptions iommu=1 vtd=1 pci.backhide for a PCI-E nvidia graphiccard xm dmesg Error messages includes: [VT-D] iommu.c: 1694:d32767 iommu: mapping reserved region failed [VT-D] iommu.c: 1542:d0 intel_iommu_add_device: context mapping failed If i try to start my HVM by xm create win2k the system reboots...

<overly trimmed> On 02/25/2015 01:56 PM, Ashley M. Kirchner wrote: > Ok, so some of this now works, but I'm still having problems. With the > bootif option, the system now correctly configures and uses the same > interface to get its kickstart file. However, when the system is done and > boots up, the interfaces are still messed up. So this is what I have in the >