search for: bomontec

Hello, We have a quadBRI in NT mode with bri_cpe_ptmp signalling and when connect a ISDN telephone to this nothings happen. What can I do? My config files are this: Zaptel.conf: loadzone=es defaultzone=es # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,1,3,ccs,ami span=3,1,3,ccs,ami span=4,1,3,ccs,ami bchan=1,2 dchan=3

Users withing the office can dial a 3 digit extension and that will ring a phone. The problem I'm running into is you have to press xxx then press 'send or 'dial'. The pbx doesn't recognize a 3 digit number as an internal extension and automatically dial it the user has to initiate that call. Asterisk automatically initiates calls w/ 9+7 digits and LD calls,

Hi, We have a e405p with a external Euro-isdn PRI-ISDN net interface from Telco connected. We tried to send a fax to another machine with a TDM400P. We use IAX2 with G711-alaw codec. Both fax machines connect, but have error in transfer. We use asterisk CVS-02/01/04. Which can be the problem ?. What can I do to find the problem ? Thanks. Regards, Pedro

Hi, When have a incoming call from E1 to a extension FXS, and this extension is busy, the incoming call recive ring tone, and it is wrong. What can I do? Thanks in advance Pedro Here is the trace: asterisk-1*CLI> < Protocol Discriminator: Q.931 (8) len=41 < Call Ref: len= 2 (reference 66/0x42) (Originator) < Message type: SETUP (5) < Sending Complete (len= 4) < Bearer

Hi, We try ti hide the caller id at calls trought E1 in EuroISDN (Spain) using restrictcid=yes and doesn?t work. What can I do, thaks Pedro -----Mensaje original----- De: asterisk-users-admin@lists.digium.com [mailto:asterisk-users-admin@lists.digium.com]En nombre de asterisk-users-request@lists.digium.com Enviado el: mi?rcoles, 31 de marzo de 2004 12:00 Para: asterisk-users@lists.digium.com