search for: blackout

...we have an old file MS W2K (NTFS) server where due no admin was available to manage it, the server would get power off when the office closed, and auto power on again in the morning. That thing happened for years and it was fine ^^ Recently, I setup a Centos 5.5 file server with ext3 and got power blackout twice and I notice the filesystem got corrupted and also bad sectors. Is it just pure random luck, software or hardware issue? What's your experience? Thank you.

2. Recommendations? My use case is pretty typical. I have one Linux machine I want to protect, automated shutown is desirable, blackouts longer than a hour are very rare at my location (the last one I can remember was in 1993), brownouts are very rare and mild, but summer thunderstorms are common and can be severe. I'm a good match for your typical consmer-grade UPS. 2a. In 2009, what do you recommend in a consumer-grade GPS?...

...ssfully however this particular operator processes around 200 calls a hours and the GXP2000 for sure does not like the quick line shuffling and call volume. We get the following problems randomly: 1. menu stops working 2. transfer key stops working 3. Line 1 LED gets stuck 4. Voice 'gaps' (blackouts) for 4-5 seconds 5. The phone also completely locks up regularly 6. ping response goes from 8ms to 3000ms (after which the phone locks up) Wondering which operator phone would work best. I have the following choices: 1. Linksys SPA 932/962 with attendant console 2. Polycom 601/650 with attendant...

Hello again! I''ve another "what would you do in this situation" question. You''ve got 6 controllers, one named base. The other 5 controllers extend base. Currently they share one layout. Your layout displays navigation. However, there are two actions inside base for which you do not want navigation displayed (index, new). Do you... a) Add logic to your layout telling

Greetings NUT users, I am looking for a solution to monitor the power OUTSIDE my datacenter. (The on/blackout status of main building power). My small datacenter is covered by a UPS, an older Liebert 18Kva unit with no environmental or status monitoring outside of the LCD console and audible alarm. The Liebert UPS is backed by a 35KW diesel generator which usually kicks on within 10 seconds of a powe...

Has anyone else seen this? I patched my Red Hat box yesterday with the Red Hat 2.4.18-4 kernel patch. It was fine until I rebooted and then the new kernel failed. It still came up with the old kernel. No biggee, we were in a blackout time anyway since we are not allowed to stream certain national broadcasts, so I re-installed just to try out something new. I patched the kernel with all the updates, THEN installed icecast, lame and MuSE. No luck. No streaming. It took sndconfig a couple tries to find the card, but then it playe...

...ame time each day, something happens and the documents are not accessible and the access programs hang ... and the 'df' command also hangs at the out of the Samba mount 1) "img1" is the name of the Windows server and is identified by name in the /etc/hosts file 2) During the blackout, the Windows Server is up and all the other PC's on the network CAN STILL access the documents 3) Logs on Linux show nothing of value (that I know what to look for) 4) Event logs on Windows show nothing at that/those times 5) About 15-17 minutes after the hang/blackout occurs, the calls co...

Hi guys. Recently we've moved our old (and I mean _really_ old) mailserver to a new hardware. Since I had quite some time on my hands, I decided to switch from courier to dovecot. Transition went pretty smoothly and the users experienced just a few hours' blackout. Only trouble now is that, after re-configuring some IOS handsets and tablets, not all messages are displayed correctly. For example, I had a long existing mailbox (roughly 1600 emails in INBOX and about a dozen other folders) that showed up perfectly on my iphone. Now it's been synced to the...

Hi list I'm new here, but I've been using CentOS for about 2 years. I had some problems today, there was a blackout and I couldn't poweroff my machine on the right way, when I turn on the machine again everything when right until the dialogo Activating swap/fstab. the pc freezed there and didn't go on, my question is,what was going on and how can I resolve that without reinstalling the pc? forgive me a...

...] data is no longer stale And after that there are no other messages, until the power up messages ( so I must conclude that the server was suddenly powered off without doing a nice shut down ). There are two possibilities: the UPS suddenly shut itself down ( very unlikely as there was no power blackout ) or the nut driver mistakenly gave the UPS a power off command. Thanks in advance for helping me to diagnose the problem. Aldo Caruso More info: battery.charge: 0.0 battery.voltage: 13.30 battery.voltage.nominal: 11.5 driver.name: megatec driver.parameter.port: /dev/ttyS0 driver.version: 2.0....

...tra (Australia) CLID service, and I have ADSL on the same line (a line filter is installed.) The fact that clidtest works suggests that the card's getting the CLID fine, but there's a problem after that. Sorry for the repeat post - I managed to post the original during the recent list 'blackout', so I guess it didn't get to many people. Any ideas would be greatly appreciated. Cheers, Jon

Hello All, I'm trying to establish a MASTER SLAVE configuration of UPS using NUT Driver. I'm able to shutdown the master after UPS is on BATTERY ( POWER BLACKOUT) .However I'm trying to shutdown the other SLAVE MACHINES BEFORE MASTER. But at the remote side ( Slaves ) shutdown after UPS blackout does not happen. My configuration in Master are /usr/etc/upsd.users [ups_user] password = admin instcmds = a...

...date the UPS HOWTO, <http://tldp.org/HOWTO/UPS-HOWTO/introduction.html>. I have not yet selected a replacement UPS. There is no urgent need for me to do so; where I live (mid-Atlantic coast of the U.S.) it is the dead of winter and the absolutely least risky time of the year for events like blackouts and electrical storms. I have about three months before our summer storm season really threatens. Rather than buy a UPS instantly, I would prefer to do some research on the state of the market in 2009 and allow others to benefit from what I learn. Accordingly, I have at least three sets of ques...

...eam. Again thank you. > > For me OL is not an alternative. > > As reported in my previous message I'm not worried about how much time is > required to build the new (major/minor) release, it will be ready when it > will be. My major concern is about the "security update blackout" that take > long as the build process. > > I would ask to you: > > 1. Why all security fix are stopped when a new release building process is > started? There is a way or possibility to run the two process in parallel? So .. when a point release happens .. say 7.8 to 7.9...

For example, this station: http://radio.dyne.org:8000/ondarossa.mp3 has got a xspf file? I obtain a message: Could not parse XSLT file when i try to open it For the stations that I can't found in yp.xml (e.g. http://212.162.68.230/1.mp3 http://212.162.68.230/2.mp3 http://212.162.68.230/3.mp3 http://stream15.top-ix.org/ondequadre ) it means they aren't on an official

...ounted" for each subject.  The reason is that a rule has been set up, whereby a subject can only be "counted" once per 30 day period (the 30 day window includes the day the event of interest is counted).   The solution should count only the following events per subject(per the 30-day blackout rule):   ID Date  auto1 1/1/2010  auto2 2/12/2010  auto2 4/21/2011  auto3 3/1/2010  auto3 5/3/2010    I have created a multistep process to do this, but it is extremely clumsy (detailed below).  I have to believe that one of you has a much more elegant solution.  Thank you all in advance for any he...

...t parse XSLT file when i try to open it > Ah, you are talking about the /individual/ servers, not about > http://dir.xiph.org - that explains it! > > So let's deconstruct this: > This is the status page: http://radio.dyne.org:8000/ > It has a link to http://radio.dyne.org:8000/blackout.mp3.xspf > If you click that link it will show "Could not parse XSLT file". > This is a problem of /this/ particular server. > > I think in Icecast 2.3.x there was a problem that the make-file would > not install the xspf.xsl file properly and thus some distributions > c...

Hi, first of all, my name is Karsten and I am fairly new to xen. A former colleague of mine has set up a xen dom0 with 4 virtual machines runnig on it. A few months ago this colleague left the company. Last week our office Building has been hit by a lightning wich resulted in an power blackout. After the power went back again, the system booted and all but one of the virtual machines went back. The virtual machine that did not went back seems not to be able to boot, i see some kind of grub error. The console of this machine prints out: ===== Plex86/Bochs VGABios current-cvs 07 Jun 2...

...l status after "upsmon -c fsd" once mains power returns or if power was never actually off; whereas with "upsmon -c epo" then everything should power down and stay off even if mains power remains on and steady. For example I would have used "FSD" to shut down in power blackouts where I knew the power could not return before the batteries ran low, and thus I would have conserved battery charge for the inevitable short hiccups that occur after a long blackout, but still been able to enjoy automatic restart after the blackout in case power returns while I'm sleeping, et...

On 6/17/20 8:06 AM, Simon Matter via CentOS wrote: >> Hi, >> >> I just read this blog article from austrian Linux expert Michael Kofler. >> For >> those among you who don't know the guy, he's my home country's number one >> Linux >> expert (known as "der Kofler") and most notably the author of a series of >> excellent books