search for: benkamen

On 12/27/18 8:09 AM, Charles Lepple wrote: > [...] That's Ben's point - either it is actual Ethernet (usually found > on an add-on UPS SNMP monitoring card, where the jack typically has > two status LEDs, one on either side of the notch for the modular plug > tab) that needs to go to another Ethernet jack on a NIC or a switch, > or it is a proprietary APC cable that

> >> Maybe it's not a standard ethernet-to-UPS cable? > > That's Ben's point - either it is actual Ethernet (usually found on an add-on UPS SNMP monitoring card, where the jack typically has two status LEDs, one on either side of the notch for the modular plug tab) that needs to go to another Ethernet jack on a NIC or a switch, or it is a proprietary APC cable that

On 11/02/2017 01:52 AM, Jim Klimov wrote: > > I believe the main reason for a new set of .c/.h files here would be if the new MIB is defined in a separate subtree. The top-level mapping binds the vendor entry OIDs (often "hidden" so one has to know where to poke). It may also be higher in the list of snmp-ups.h, in case the device also serves the older MIB but you'd prefer the

...things. Does NUT support all that and should I make an effort to get all that in or should we skip for now and get UPS primary ingredients inserted and tested? just wondering, ?-Ben -- Ben Kamen - O.D.T., S.P. ---------------------------------------------------------------------- Email: ben AT benkamen DOT net http://www.benkamen.net Cell: 224.619.9006 http://www.linkedin.com/in/benkamen - - NOTICE: All legal disclaimers sent to benkamen.net or any of its affiliated domains are rendered null and voi...

...ldn't be hard. It's most definitely not Ethernet. LIke I said - I have a BackUPS 350... it has the 8p8c modular connector and came with a cable that plugs into USB.  -Ben -- Ben Kamen - O.D.T., S.P. ---------------------------------------------------------------------- Email: ben AT benkamen DOT net http://www.benkamen.net Cell: 224.619.9006 http://www.linkedin.com/in/benkamen - - NOTICE: All legal disclaimers sent to benkamen.net or any of its affiliated domains are rendered null and voi...

Lately I got (used) an APC Back UPS Pro 1000 and Back UPS NS 1080. I got an ethernet-to-USB cable from another UPS, but the Pro isn't detected (with usbhid-ups.) I haven't tried the NS yet but it seems to not be on the list though looks just like the Pro. Some months ago I was discussing setup of a Ferrups 700VA.  I got it to work only with a command in rc.local, but not automatically

Build from source, and done . . . wasting your time looking for a less out of date RPM is pointless. . . RPM, .deb, etc are almost always downrev. . . - Tim On June 10, 2017 2:06:42 PM CDT, Ben Kamen <ben at benkamen.net> wrote: >Hey all, > > I recently got an RMCARD205 for my Cyber UPS.... > >if I use no MIBS line in the config file, I get this: > > >> Network UPS Tools - UPS driver controller 2.6.5 >> Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) >> No matc...

I'm playing with a new CentOS 8 with a cyperpower OR500 (a smaller sibling to the OR700) plugged in via USB. GNOME sees the UPS... but NUT does not (even if I shut down gnome). > [root at delp ups]# upsdrvctl start > Network UPS Tools - UPS driver controller 2.7.4 > Network UPS Tools - Generic HID driver 0.41 (2.7.4) > USB communication driver 0.33 > No matching HID UPS found

On October 31, 2017 2:32:36 AM GMT+01:00, Ben Kamen <ben at benkamen.net> wrote: >Hey all, > > >?I'm feeling spunky... and want to update nut to handle the new v2.0 >MIB from CyberPower. > >I've looked at the cyberpower v0.1 .c/.h and being new to working on >nut to this level -- anything anyone has to offer on adding code >besi...

On November 2, 2017 5:31:42 AM GMT+01:00, Ben Kamen <ben at benkamen.net> wrote: >On 10/31/2017 01:13 AM, Jim Klimov wrote: >> If the new data is in a separate OID tree, it can quite be a new MIB. >Otherwise you can use the UNIQUE flag and set the preferred (e.g. >newer, more precise) source for a value first in the list of same-named >mappings...

...jammin.net http://www.benjammin.net Fortune says: Military secrets are the most fleeting of all. -- Spock, "The Enterprise Incident", stardate 5027.4 - - NOTICE: All legal disclaimers sent to benjammin.net/benkamen.net or any of it's affiliated domains are rendered null and void on receipt of communications and will be handled/considered as such.

On Mar 27, 2020, at 11:51 PM, Ben Kamen <ben at benkamen.net> wrote: > > I'm playing with a new CentOS 8 with a cyperpower OR500 (a smaller sibling to the OR700) plugged in via USB. > > GNOME sees the UPS... but NUT does not (even if I shut down gnome). > >> [root at delp ups]# upsdrvctl start >> Network UPS Tools - U...

....net http://www.benjammin.net Fortune says: Insults are effective only where emotion is present. -- Spock, "Who Mourns for Adonais?" stardate 3468.1 - - NOTICE: All legal disclaimers sent to benjammin.net/benkamen.net or any of it's affiliated domains are rendered null and void on receipt of communications and will be handled/considered as such.

...http://www.benjammin.net Fortune says: "Beauty is transitory." "Beauty survives." -- Spock and Kirk, "That Which Survives", stardate unknown - - NOTICE: All legal disclaimers sent to benjammin.net/benkamen.net or any of it's affiliated domains are rendered null and void on receipt of communications and will be handled/considered as such.

...wson at tpcsvc.com> wrote: >>Build from source, and done . . . wasting your time looking for a less >>out of date RPM is pointless. . . RPM, .deb, etc are almost always >>downrev. . . >> >>- Tim >> >>On June 10, 2017 2:06:42 PM CDT, Ben Kamen <ben at benkamen.net> wrote: >>>Hey all, >>> >>> I recently got an RMCARD205 for my Cyber UPS.... >>> >>>if I use no MIBS line in the config file, I get this: >>> >>> >>>> Network UPS Tools - UPS driver controller 2.6.5 >>>> N...

...47 EEST, Tim Dawson <tadawson at tpcsvc.com> wrote: >Build from source, and done . . . wasting your time looking for a less >out of date RPM is pointless. . . RPM, .deb, etc are almost always >downrev. . . > >- Tim > >On June 10, 2017 2:06:42 PM CDT, Ben Kamen <ben at benkamen.net> wrote: >>Hey all, >> >> I recently got an RMCARD205 for my Cyber UPS.... >> >>if I use no MIBS line in the config file, I get this: >> >> >>> Network UPS Tools - UPS driver controller 2.6.5 >>> Network UPS Tools - Generic SNMP UPS...

Hey there, I got a new UPS (CyberPower PR1500LCDRTXL2Ua) and found the serial drivers don't quite work... So I decided to jump in and make changes to the driver that would hopefully make it happier. I have it working (I really only changed powerp-txt.c) but still have a couple questions... Charles said I should mention them here to talk to anyone interest but specifically Arjen (one of

On Jan 19, 2016, at 9:37 AM, Ben Kamen <ben at benkamen.net> wrote: > > Hey there, > > I got a new UPS (CyberPower PR1500LCDRTXL2Ua) and found the serial drivers don't quite work... [...] > Essentially, I rewrote powpan_status so it better tolerates strings of different lengths (although I only have the 1 UPS right now, so I can...

Hey all, ?I'm feeling spunky... and want to update nut to handle the new v2.0 MIB from CyberPower. I've looked at the cyberpower v0.1 .c/.h and being new to working on nut to this level -- anything anyone has to offer on adding code besides the obvious? like: should the 0.1 and 2.0 coexist somehow? (maybe different files) (also, is there a list of all the parms I can match up from the

On 10/31/2017 01:13 AM, Jim Klimov wrote: > If the new data is in a separate OID tree, it can quite be a new MIB. Otherwise you can use the UNIQUE flag and set the preferred (e.g. newer, more precise) source for a value first in the list of same-named mappings in existing file - if there's a hit on an actual device, it will be used and not iterated onwards. The flag is not yet supported for