search for: behinding

Hi All; I succeeded to have a success call from Polycom behind NAT while Asterisk has public IP address, but I was not able to have a succeed call (it was established, but no voice running, and then the call disconnected) if Asterisk behind NAT and Polycom behind NAT. When Asterisk behind NAT and Polycom behind NAT, I forwarded the 5060 UDP to asterisk (at asterisk router) and to Polycom IP

Hi all It seems Mercurial doesn't work with "write behind" on. Any ideas? With write-behind -- root at dj1:~/mnt# gluster volume set conf performance.write-behind on Set volume successful root at dj1:~/mnt# hg clone http://projects.unbit.it/hg/uwsgi destination directory: uwsgi requesting all changes adding changesets transaction abort! rollback completed abort: integrity check

Hi, I have the following scenario. I have an Asterisk server running on an internal IP address behind a firewall, and I have a remote user trying to connect to my Asterisk box behind his firewall, but he can't seem to get a connection. I have opened up the port (5060) so that he can connect through my firewall, but it still doesn't appear to want to connect. I am pretty sure that the

I am having an issue with doing FTP auto provisioning of Polycom 501's when they are behind a NAT. If I put the phone on the same subnet as the provision server it loads the configs and changes fine but as soon as I put in behind a NAT it comes up with cannot contact boot server. I have tried behind and replicated this behind a PIX 501, a Linksys SOHO router and a Motorolla SOHO router.

Hi all, I've searched the wiki, and my basic assumption at this point is to run multiple IAX clients behind NAT I need to specifically code each client to use a different port and then setup that port to be forwarded from the NAT router to their private IP address. At the moment, I can't seem to get more than one IAX client registered behind NAT... am I correct in my above

I?ve been tearing my hair out trying to get a Polycom phone (behind a NAT) to register to an * box behind a Cisco SIP ALG. With known good credentials configured on the phone and in *, I get 403 Bad Auth when trying to register. If I put the phone onto the same LAN as * it works fine without changing any authentication parameters whatsoever. If I make the secret blank (null) on the phone and *,

I have some tinc nodes behind a nat router. Which ipaddress should i use in de host file for the tinc nodes behind a nat router. The internet ipaddress or the private ipaddress ? Perry

My Asterisk server is behind a NAT and I have set: ---------------------------------------------------------------------------- externhost="my.server.address" externrefresh=180 localnet=192.168.0.0/255.255.0.0 localnet=10.0.0.0/255.0.0.0 localnet=172.16.0.0/12 nat=yes --------------------------------------------------------------------------- in [general] section of sip.conf. I can

Hi, I have a tinc tunnel up and running. I connected 2 hosts with a net behind. Host A with static ip 1.2.3.4 with 192.168.1.0/24 Host B with dhcp connection with 192.168.2.0/24 the whole net is 192.168.0.0/16 I can reach at any time any host behind A from a host behind B. But I can reach a host behind B only, if traffic (keep alive like ping) from B goes continousliy from B to A. I am running

Hi, I have the following problem. I have 5 phones behind the same nat (canreinvite=yes). it works fine to receive calls and to make calls. sound quality is good, so everything works fine. The poblem is that the phone behind nat cant call each other. It works if canreinvite=no. But i want to do this. Does anyone have an idea? Regards, cjk.

Hi, I'm trying to configure Sipura 2000 (behind NAT) which connects to Asterisk (public IP, no NAT) and having interesting results. When Sipura is behind Linux/NAT firewall it works great and no special NAT settings on Sipura are necessary. The issue I'm having is when Sipura is behind Linksys broadband NAT router. Sipura gets registered with Asterisk just fine, but I can't hear

Hi To investigate the UNREACHABLE issue I'm having, I need to have confirmation that it's OK for the Asterisk server to be behind a NAT router, and also have clients elsewhere on the Net behind their own NAT router? I know that clients must use STUN to resolve their public IP and punch UDP holes in their firewall, but is there something special that must be done in the configuration

I was wondering if anyone can give me any pointers or insights of whether or not to have an asterisk server behind a firewall. I have always ran Asterisk on a public IP but was wondering if I should move it to a local IP behind a firewall. I am looking to set up a location with 300 SIP phones. Normally, I would put the Asterisk server on one public IP and let the SIP phones get DHCP from a

Hi people! I am not getting smart getting asterisk 1.6 behind a NAT to run. 1. I enabled IP forwarding on debian linux 2. told asterisk in "general" that he is behind NAT and mentioned him his external static IP Adress as well his domain in the outside world. If a client who is connected with a DSL modem calls me, a grandstream module in the LAN behind the router, in the same network

Hi All, I've an Asterisk Server behind a NAT. Using DNAT, I've opened port 5060 and all 10000:20000 udp. Sip configured with externalip and subnet. I've another site, also with NAT, where I map the rtp port (as defined in the client) to map to the local client (DNAT). Using Xlite, this configuration works, it requires using the quality=yes and NAT=yes/always in the sip ext

Hi Raghavendra, > On 20 Mar 2018, at 1:55 pm, Raghavendra Gowdappa <rgowdapp at redhat.com> wrote: > > Aggregating large number of small writes by write-behind into large writes has been merged on master: > https://github.com/gluster/glusterfs/issues/364 <https://github.com/gluster/glusterfs/issues/364> > > Would like to know whether it helps for this usecase.

Hi, I''ve configured mongrel_clusters behind an Apache 2.2 proxy using named virtual host. Session are saved as ActiveRecordSession. But the cookies created on client side doesn''t correspond to session data saved in database (keys are different). The RoR app react just like it doesn''t have a session at all. If I don''t use Apache as a proxy/load balancer

Hi R users, I have a question. How can I see the code behind the function. For example, > boxplot function (x, ...) UseMethod("boxplot") <environment: namespace:graphics> I really would like to see how people code this. Could someone please show me how to see the code behind the function? Many Thanks Tu -- View this message in context:

And the firewall is in between the phones and both servers or are you registering the phones on a local server and trunking to the other server through the firewall? In terms of nat and Cisco 7960s I've never had a issue registering two of them behind nat to a server on the other side, however, if you called one phone from the other, you'd end up with one way audio. -----Original

Hi, I've followed the guide at: http://blogs.operationaldynamics.com/andrew/software/research/using-tinc-vpn and have a working tinc VPN. Here's my topology: - CentralNode has a fixed public IP address that everyone connects to - Leaf1 and Leaf2 may have different IP addresses depending on where they are, and usually those will be behind NAT (think, two laptops going around and you get