search for: bce0

Hi, tuning my network fixing nic's speed and duplex (both on server and switch) i got this error with bce driver: # ifconfig bce0 bce0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=1bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4> ether 00:15:c5:fe:11:01 inet 192.168.1.13 netmask 0xffffff00 broadcast 192.168.1.255 media: Ethernet a...

Hello Try install FreeBSD 6.3-prerelease on Intel SBXD132 blade (same as IBM HS21 XM) ifconfig bce0 report: bce0: flags=8847<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=3b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU> inet 172.0.0.199 netmask 0xffffff00 broadcast 172.0.0.255 ether 00:1a:64:33:29:c7 media: Ethernet autoselect (none) status: no carrier We are looking f...

...85 and for older: procs memory page disk faults cpu r b w avm fre flt re pi po fr sr mf0 in sy cs us sy id 0 1 0 3694M 414M 236 0 0 0 199 17 0 286 317 386 1 1 97 bce-related part of dmesg for the newer system: bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9 miibus0: <MII bus> on bce0 bce0: Ethernet address: 00:15:c5:f1:56:f4 bce0: [ITHREAD] bce0: ASIC (0x57081020); Rev (B2); Bus (PCI-X, 64-bit, 133MHz); F/W (0x02090105); Flags( SPLT MFW...

Hi All, I have an asterisk box on my DMZ, and I'm using a PF for my firewall, I can make a call but some reasons I have a dead air. Any Ideas? below are my rules... ext_if = "bce0" int_if = "bce1" altitude = "172.16.1.0/24" #### machines #### vbox = "172.16.1.1" uci = "172.16.1.4" voices = "203.172.x.1" ipc = "203.172.x.2" #### default deny #### set block-policy return set loginterface $ext_if set skip on lo...

...> on pcib5 pcib6: <ACPI PCI-PCI bridge> irq 40 at device 18.0 on pci0 pci11: <ACPI PCI bus> on pcib6 pcib7: <ACPI PCI-PCI bridge> irq 41 at device 19.0 on pci0 pci3: <ACPI PCI bus> on pcib7 pcib8: <PCI-PCI bridge> at device 0.0 on pci3 pci4: <PCI bus> on pcib8 bce0: <HP NC373i Multifunction Gigabit Server Adapter (B2)> mem 0xf8000000-0xf9ffffff irq 41 at device 0.0 on pci4 bce0: /usr/src/sys/dev/bce/if_bce.c(1258): Management firmware enabled but not running! miibus0: <MII bus> on bce0 brgphy0: <BCM5708C 1000BASE-T media interface> PHY 1 on...

Hi, on 2 different servers, running 7.1-stable + zfs, I get this error rather frequently: Feb 5 17:01:03 warhol-00 kernel: impossible packet length (543383918) from nfs server sunfire:/dist Feb 5 17:01:03 warhol-00 kernel: impossible packet length (1936028704) from nfs server sunfire:/dist Feb 5 17:01:03 warhol-00 kernel: impossible packet length (1869363744) from nfs server sunfire:/dist

...ffff000008a79678 [35322.049489] bc80: ffff809e8fd7be00 ffff80beb512be00 ffff80beb512bcb0 ffff000008812f24 [35322.065321] bca0: ffff809e8fd7be00 000000000000004e ffff80beb512bd50 ffff0000088133f0 [35322.081165] bcc0: ffff809ece3e4900 0000000000011000 ffff80beb512bdd8 ffff80beb512be00 [35322.097001] bce0: 000000001d6c13a4 0000000000000015 0000000000000124 000000000000003f [35322.112866] bd00: ffff000008bc2000 ffff00000847b5ac 0000000000020000 ffff80be00080000 [35322.128701] bd20: 0022000000000001 ffff80bed7fc0010 ffff000008100c38 0000000000000000 [35322.144539] bd40: 0000000000000000 0000000000040b...

...ffff000008a79678 [35322.049489] bc80: ffff809e8fd7be00 ffff80beb512be00 ffff80beb512bcb0 ffff000008812f24 [35322.065321] bca0: ffff809e8fd7be00 000000000000004e ffff80beb512bd50 ffff0000088133f0 [35322.081165] bcc0: ffff809ece3e4900 0000000000011000 ffff80beb512bdd8 ffff80beb512be00 [35322.097001] bce0: 000000001d6c13a4 0000000000000015 0000000000000124 000000000000003f [35322.112866] bd00: ffff000008bc2000 ffff00000847b5ac 0000000000020000 ffff80be00080000 [35322.128701] bd20: 0022000000000001 ffff80bed7fc0010 ffff000008100c38 0000000000000000 [35322.144539] bd40: 0000000000000000 0000000000040b...

Hello, Since FreeBSD 9.1 I have strange problems with the distribution. Some servers are rebooting without any kernel panic, instanly. First i thought it's a problem with my KVM system, but one of my FreeBSD under a Dell R210 have the same problem. The servers concerned are now: - Monitoring server - LDAP test server - Some other servers, randomly (not in production). First i thought it's

Recently under amd64 and 9.1-STABLE I am seeing issues with the bce driver. Message is "Warning: bootcode thinks driver is absent". After this message, the box appears to be wedged. After rebooting, it got the same message during fsck. So we installed 9.2 pre-release using a snapshot iso from 7/13/13. Shortly after boot we got the same message. We are now in the process of

Hello ! I have joined my samba 3.0.32 samba server to a windows 2003 domain = controller. All works well and all users are mapped etc etc. Now is the server situated on a remote location. My question is can it handle domain logons for the remote location or = can this only be done by the 2003 server. the reason is that the connection between both locations is sometimes = out of order. =20

...t; [35322.049489] bc80: ffff809e8fd7be00 ffff80beb512be00 ffff80beb512bcb0 ffff000008812f24 > [35322.065321] bca0: ffff809e8fd7be00 000000000000004e ffff80beb512bd50 ffff0000088133f0 > [35322.081165] bcc0: ffff809ece3e4900 0000000000011000 ffff80beb512bdd8 ffff80beb512be00 > [35322.097001] bce0: 000000001d6c13a4 0000000000000015 0000000000000124 000000000000003f > [35322.112866] bd00: ffff000008bc2000 ffff00000847b5ac 0000000000020000 ffff80be00080000 > [35322.128701] bd20: 0022000000000001 ffff80bed7fc0010 ffff000008100c38 0000000000000000 > [35322.144539] bd40: 0000000000000000...

...<ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci4 pci5: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci5 pci6: <ACPI PCI bus> on pcib3 pcib4: <PCI-PCI bridge> at device 0.0 on pci6 pci7: <PCI bus> on pcib4 bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B2)> mem 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci7 miibus0: <MII bus> on bce0 brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bc...

...t; [35322.049489] bc80: ffff809e8fd7be00 ffff80beb512be00 ffff80beb512bcb0 ffff000008812f24 > [35322.065321] bca0: ffff809e8fd7be00 000000000000004e ffff80beb512bd50 ffff0000088133f0 > [35322.081165] bcc0: ffff809ece3e4900 0000000000011000 ffff80beb512bdd8 ffff80beb512be00 > [35322.097001] bce0: 000000001d6c13a4 0000000000000015 0000000000000124 000000000000003f > [35322.112866] bd00: ffff000008bc2000 ffff00000847b5ac 0000000000020000 ffff80be00080000 > [35322.128701] bd20: 0022000000000001 ffff80bed7fc0010 ffff000008100c38 0000000000000000 > [35322.144539] bd40: 0000000000000000...

...t; [35322.049489] bc80: ffff809e8fd7be00 ffff80beb512be00 ffff80beb512bcb0 ffff000008812f24 > [35322.065321] bca0: ffff809e8fd7be00 000000000000004e ffff80beb512bd50 ffff0000088133f0 > [35322.081165] bcc0: ffff809ece3e4900 0000000000011000 ffff80beb512bdd8 ffff80beb512be00 > [35322.097001] bce0: 000000001d6c13a4 0000000000000015 0000000000000124 000000000000003f > [35322.112866] bd00: ffff000008bc2000 ffff00000847b5ac 0000000000020000 ffff80be00080000 > [35322.128701] bd20: 0022000000000001 ffff80bed7fc0010 ffff000008100c38 0000000000000000 > [35322.144539] bd40: 0000000000000000...

My samba thinks its own groups don't exist. Background: I had a samba3 server operating as a NAS with some desktops joined to the domain. I'm migrating it to samba 4.0.9 as an AD domain. Users can log in and browse their home share -- but the other shares aren't working. They're per-project shares set up to allow that project's group access, and to forcibly make all files

Hi, I have a Dell T710 with 4 X 10G ethernet interfaces (2 X Dual port Intel 82599 cards). It is running FreeBSD RELENG_8 last updated on July 13. What I see is packet loss (0 - 40%) on IPv6 packets in vlans, when the machine is not the originator of the packets. Let me try to describe a little more. If a neigbouring machine ping6 it, there will be packet loss. If it act as a router for ipv6,

Sorry for the repost... I don't think the first one posted.. posted to freebsd.stable, freebsd-current, Freebsd-hardware I checked the hardware in the online documentation manual/hardware It only lists the bits and peices of the machine say the hard drive controller and so forth. but doesn't give you a particular system to look at as a working machine with FreeBSD 6.2 does anybody

...0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 10.33.0.7 f08n25 10.33.0.8 f08n33 10.33.0.30 f08n29 [root at f08n29glusterfs]# gluster pool list UUID Hostname State 05b203e0-6a2d-44bf-bce0-c1a5dbf2e81f 10.33.0.8 Connected c72285e0-b98d-4a50-afa7-677916d1b2bf 10.33.0.7 Connected a3de3c39-7574-4f6c-9429-de8ee24a97ee localhost Connected [root at f08n29glusterfs]# gluster volume create test_vol disperse 3 redundancy 1 BRICK_LIST_ON_THREE_NODE force [root at f08n29glusterfs]# glus...