search for: baud_base

...ete > Wondering if you've tried poking at them with 'setserial'? > Thanks for the suggestion. I looked at them with setserial, but I have no familiarity with the program to know what to change. setserial -ag /dev/ttyS* /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 ??? Baud_base: 115200, close_delay: 50, divisor: 0 ??? closing_wait: 3000 ??? Flags: spd_normal skip_test /dev/ttyS1, Line 1, UART: 16550A, Port: 0x8000, IRQ: 17 ??? Baud_base: 115200, close_delay: 50, divisor: 0 ??? closing_wait: none ??? Flags: spd_normal skip_test /dev/ttyS2, Line 2, UART: 16550A, Port...

...ng at them with 'setserial'? > > > Thanks for the suggestion. > > I looked at them with setserial, but I have no familiarity with the > program to know what to change. > > setserial -ag /dev/ttyS* > /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 > ??? Baud_base: 115200, close_delay: 50, divisor: 0 > ??? closing_wait: 3000 > ??? Flags: spd_normal skip_test > > /dev/ttyS1, Line 1, UART: 16550A, Port: 0x8000, IRQ: 17 > ??? Baud_base: 115200, close_delay: 50, divisor: 0 > ??? closing_wait: none > ??? Flags: spd_normal skip_test > &gt...

I'm upgrading from CentOS6 to CentOS 7. I run 2 weather stations on C6 and have one of them attached to ttyS0 which is on the motherboard, and the other to ttyS2 which in on an add-on PCI serial card. I'm migrating the weather stations another host running C7 which has a similar hardware configuration.? When I connect the weather station to ttyS0 everything works fine, but when I try

...instructions for Linux support for this card state that you should look for the string "serial port x" in the contents of /proc/pci, and then use that information with the setserial command to configure the port as follows: # setserial /dev/ttyS2 port 0xc000 uart 16550 irq 11 baud_base 115200 The problem is that I can't find the equivalent of the "0xc000" and the IRQ on my system in the contents of /proc/pci. Here is what the built-in, working serial port looks like: # setserial -a /dev/ttyS0 /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4...

...ght a 3rd pary shield. If you have a jumper wire handy, you can connect the PC's TxD to RxD, and check that characters are echoed in minicom. Then check the continuity to the serial port. > > # setserial -gav /dev/ttyS0 > /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 > Baud_base: 115200, close_delay: 50, divisor: 0 > closing_wait: 3000 > Flags: spd_normal skip_test Curious about the "skip_test" option... > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser at lists.alioth.debian.org > http://lists.al...

I am a 62 year old beginner in Ubuntu. Thanks for any help, guidance, suggestions on this problem! I have used commands like the following to be certain that I have an active com port: dmesg | grep ttyS rm com1 ln -s /dev/ttyS0 com1 So I suspect the solution lies somewhere in WINE. If all else fails I will get a USB to SERIAL converter cable and try that. My wife has an Abbott Labs Freestyle

...t 2177 Nov 23 14:04 upsd.users -rw-r----- 1 root nut 15233 Nov 23 14:04 upsmon.conf -rw-r----- 1 root nut 3887 M?r 20 2015 upssched.conf # ls -l /dev/ttyS0 crw-rw---- 1 root nut 4, 64 Nov 23 14:13 /dev/ttyS0 # setserial -gav /dev/ttyS0 /dev/ttyS0, Line 0, UART: 16550A, Port: 0x03f8, IRQ: 4 Baud_base: 115200, close_delay: 50, divisor: 0 closing_wait: 3000 Flags: spd_normal skip_test # stty -F /dev/ttyS0 speed 2400 baud; line = 0; min = 1; time = 0; -brkint -icrnl -imaxbel -opost -onlcr -isig -icanon -iexten -echo -echoe -echok -echoctl -echoke -------------- next part -------------- A...

...ith UPS" error. Same is when i type: mge-shut -u root -DDDDDDDDDD /dev/ttyS0 . I unplog and replog and after reboot my system for some times. I tried also to do a configuration of my serial port but without success. My setserial command output is: dev/ttyS0 uart 16550A port 0x03f8 irq 4 baud_base 115200 spd_normal skip_test auto_irq I'm use serial port on a fedora core 3 system. Please help! -- "Heureux ceux qui sont conscients de leur pauvret? spirituelle." - Mat 5:3(Les Saintes Ecritures - Traduction du monde nouveau). --------------------------------------------------...

...I/O 0x3f8 (irq = 4) is a 16550A root[drive_c]# ls -l /dev/ttyS0 lrwxrwxrwx 1 root root 5 2007-10-05 08:39 /dev/ttyS0 -> tts/0 root[drive_c]# ls -l /dev/tts/0 crwxrwx-w- 1 root tty 4, 64 2007-10-05 10:04 /dev/tts/0 root[drive_c]# setserial -abGv /dev/ttyS0 /dev/ttyS0 uart 16550A port 0x03f8 irq 4 baud_base 115200 spd_vhi skip_test low_latency ------------------------------------ root[drive_c]# lsmod | grep ser serial_cs 21252 0 8250 23828 4 serial_cs,8250_pnp serial_core 20032 1 8250 pcmcia 37548 2 serial_cs,parport_cs -------------------...

Unfortunately, almost all the Windows programs I want to run under Wine need to access the COM: ports, and I cannot get any of them to run. Typically, I get stuff like this ... fixme:comm:EscapeCommFunction16 no cid=0 found! fixme:comm:EscapeCommFunction16 no cid=0 found! err:comm:COMM16_ReadComplete async read failed 000003e3 fixme:comm:EscapeCommFunction16 no cid=3 found!

...; error_no_buffer: diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index b4ba79123d9d..f1201d4de297 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -848,11 +848,10 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base, dataout[DataCount++] = 0x04; break; default: kfree(dataout); return IUU_INVALID_PARAMETER; - break; } switch (parity & 0xF0) { case IUU_ONE_STOP_BIT: dataout[DataCount - 1] |= IUU_ONE_STOP_BIT; @@ -862,11 +861,10 @@ static int iuu_uart_baud(struct usb_serial_port *por...

...; error_no_buffer: diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index b4ba79123d9d..f1201d4de297 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -848,11 +848,10 @@ static int iuu_uart_baud(struct usb_serial_port *port, u32 baud_base, dataout[DataCount++] = 0x04; break; default: kfree(dataout); return IUU_INVALID_PARAMETER; - break; } switch (parity & 0xF0) { case IUU_ONE_STOP_BIT: dataout[DataCount - 1] |= IUU_ONE_STOP_BIT; @@ -862,11 +861,10 @@ static int iuu_uart_baud(struct usb_serial_port *por...