search for: balanc

...9:03:48] WARNING[30723]: chan_dahdi.c:2790 pri_find_dchan: No D-channels available! Using Primary channel 72 as D-channel anyway! Here is my PRI debug span: -- Timeout occured, restarting PRI q921.c:468 t200_expire: q921_state now is Q921_LINK_CONNECTION_RELEASED Sending Set Asynchronous Balanced Mode Extended q921.c:211 q921_send_sabme: q921_state now is Q921_AWAITING_ESTABLISH [Jun 22 09:03:48] WARNING[30723]: chan_dahdi.c:2790 pri_find_dchan: No D-channels available! Using Primary channel 72 as D-channel anyway! Sending Set Asynchronous Balanced Mode Extended Sending Set Asynchron...

Hello, This is the userspace part of restriper, rebased onto the new progs infrastructure. Restriper commands are located under ''balance'' prefix, which is now the top level command group. However to not confuse existing users ''balance'' prefix is also available under ''filesystem'': btrfs [filesystem] balance start btrfs [filesystem] balance pause btrfs [filesystem] balance cancel btrfs [...

Greetings! I''m testing raid6, and recently added two drives. I haven''t been able to properly resume a balance operation: the number of total chunks is always too low. It seems that the balance starts and pauses properly, but always resumes with ~7 chunks. Here''s an example: vendikar tim # uname -r 3.10.0-031000rc4-generic vendikar tim # btrfs fi sho Label: ''bank'' uuid: 6...

...nce. Our database loads are high, and if filesystem performance wasn''t good, MySQL replication wouldn''t be able to keep up and the slave latency would begin to climb. This though, is generally not happening, which is good. However, we recently tried running ''btrfs fi balance'' on the filesystem, and found this deteriorated performance significantly, and the MySQL replication latency did begin to climb. Several hours later, with the btrfs-cleaner thread apparently still busy, and our replication latency running to a couple of hours, and no sign of the balan...

...I ran into them enough that I quit using it that way. But, what I also found was that it was just a timing issue. If they weren't synchronized, I could wait a bit and they would get synched up. Obviously that doesn't work too great if you're sending clients to both nodes through a load balancer though. But, since it was just a timing issue, it also made me feel plenty comfortable using 2-way sync. I've been able to verify that whichever node is the "master" that the other node will be in sync soon thereafter. It just doesn't work great if you're logged into both at...

hi, for my multi-tenant pbx, i would like to approach prepaid like this: when a customer dials number, i have an AGI that will determine what country was dialed and retrieve the rate from the rate table, once the rate is retrieved, i will get the remaining balance of that customer nd compute how much time remaining based on the rte and the remaining balance. then i set that as an absolute timeout. after the call i update the balance depending on how much was used during the call. my prob is, there are multiple user behind one customer, so when 1 user c...

...callback on rails... As far as I can tell, when I define a after_update callback on a model, the attributes of the object have the same values that they had *before* Base.save was called. I''m probably wrong so here''s the code: UNIT TEST: def test_register_item_adjusts_account_balance account = accounts(:cams_credit_card) transaction = RegisterItem.new(:date => ''2006-10-31'', :description => ''Chinese food'', :amount => ''-13.44'') transact...

Hi dovecot users, I?ve found the -R parameter for dsync. Does this enable one-way syncing if enabled on the slave in replication_dsync_parameters? The documentation doesn?t mention much what happens if I enable this on the ?replciation slave?. Before you ask: Two way synchronisation causes issues in my installation (see the unanswered thread here:

...ng to learn about object oriented R, as it seems like it would be very useful. I'm going over an example from the documentation, and I'm very confused: http://www1.maths.lth.se/help/R/R.oo/ [assume you've called library (R.oo)] setConstructorS3("SavingsAccount", function(balance=0) { if (!is.numeric(balance) && length(balance) != 1) throw("Argument 'balance' must be a single numeric value: ", mode(balance)); if (balance < 0) throw("Trying to create an account with a negative balance."); extend(Object(), "Sa...

...devid 3 size 931.51GB used 0.00 path /dev/sdb devid 1 size 931.51GB used 889.15GB path /dev/sdc devid 2 size 931.51GB used 889.13GB path /dev/sdd Btrfs Btrfs v0.19 Sat Feb 05 03:22:29 root@X86-64:~# ---------------------------------------------------- So, I want to balance my data across these three devices, but I noticed an inconsistencybteween "man btrfs" and btrfs'' help... root@X86-64:~# man btrfs | grep balance btrfs device balance <path> device balance <path> Sat Feb 05 03:23:50 and Sat Feb 05 03:24:19 root@X86-6...

...I ran into them enough that I quit using it that way. But, what I also found was that it was just a timing issue. If they weren't synchronized, I could wait a bit and they would get synched up. Obviously that doesn't work too great if you're sending clients to both nodes through a load balancer though. But, since it was just a timing issue, it also made me feel plenty comfortable using 2-way sync. I've been able to verify that whichever node is the "master" that the other node will be in sync soon thereafter. It just doesn't work great if you're logged into both at...

..., We are developing several applications on a single server and I''m looking for a way to use mongrel with each of them. Right now, http://testapp.com/ is being served on that machine through apache and mongrel. Here''s what a part of my apache config looks like: <Proxy balancer balancer://testappcluster> BalancerMember http://127.0.0.1:8000 BalancerMember http://127.0.0.1:8001 BalancerMember http://127.0.0.1:8002 </Proxy> <VirtualHost testapp.com:80> ServerName testapp.com ServerAlias testapp.com ProxyPass / balancer://testappcluster/ ProxyPassReverse /...

I ive set up a working linux router with load balancing as per the lartc guide. Everything is working properly, except for the load balancing does not seem to be equally balance the load. The first line gets about 60% of the incoming load, the 2nd line gets about 40%, and the 3rd line hardly gets any of it at all. The outgoing load is evenly balanced...

Hello, I have a filesystem that has become unusable because of a balance I can''t stop. It is very close to full, and the balance is preventing me from growing it. It was started like this: sudo btrfs filesystem balance start -v -musage=60 -dusage=60 /srv/backups It has been stuck at 0% across reboots and kernel upgrades (currently on 3.8.1), and cancellin...

...would be better to allocate one processor to handle all of the IRQs and reserve the others for running processes. I have some concerns about retransmits if packet data is split across the CPUs and re-assembled in a different order than expected. I'm open to any suggestions on how to best balance Asterisk's load on an SMP system. ============================================================ List users, I have a server running Fedora Core 3 with the 2.6.12-1.1376_FC3smp kernel. It has four physical CPUs and I would like to balance the IRQs across them. It is a large scale VOIP serv...

I've read several other emails and pages on the wiki but none give any deffinate answers. if you have 20 asterisk servers each with 4 pri's, all running RealTime Extensions and RealTime SIPBuddies from the same MySQL server, what prevents you from putting all 20 servers behind a single load balancer? That way all of your UA's can use the same IP to register to; vs maintaining which customer is assigned to which machine. perhaps its just that i am not that familiar with load balancers. i was under the impression that a load balancer could/would send each recieved packet to a different se...

Had to make a couple of changes to the config from the mongrel site to get the load balancer manager working: changed # Redirect all non-static requests to cluster RewriteCond %{DOCUMENT_ROOT}/%{REQUEST_FILENAME} !-f RewriteRule ^/(.*)$ balancer://mongrel_cluster%{REQUEST_URI} [P,QSA,L] to # Redirect all non-static requests to cluster RewriteCond %{DOCUMENT_ROOT}/%{REQUEST_...

Now with the below kernel patch, the excl operations like dev add/replace/resize and balance returns the btrfs error code defined in btrfs.h, this patch will help btrfs-progs (and thus user) to know the error string on the terminal (instead of /var/log/messages as previously kernel did). This patch depends on the btrfs kernel patch: btrfs: return btrfs error code for dev excl ops err...

Hey all, Just did a btrfs balance on a single device. Before the balance operation here is the df result: inglor@tiamat ~$ btrfs fi df /home Data: total=19.19GB, used=9.34GB System, DUP: total=32.00MB, used=4.00KB Metadata, DUP: total=896.00MB, used=227.98MB Then I issues a balance operation relocating the chunks across a single...

Hi All, Can anyone help me hash out how best to load balance a website that is getting considerable traffic? In the past I only have experience with BigIP where you have a load balancing device that keeps track and send traffic to the best server possible at the time. This was a proprietary system that I think was something Dell rebranded. Right now, the...