search for: bakke

Hi What is the general state of btrfs RAID6 as of kernel 3.13-rc1 and the latest btrfs tools? More specifically: - Is it able to correct errors during scrubs? - Is it able to transparently handle disk failures without downtime? - Is it possible to convert btrfs RAID10 to RAID6 without recreating the fs? - Is it possible to add/remove drives to a RAID6 array? Regards, Hans-Kristian -- To

On 29/01/15 22:56, Hans-Kristian Bakke wrote: > Something went wrong and the message got sent before it was finished. > Here is the complete one: > > Ok, it's here: http://pastebin.com/JEnr5wUq > > The id_offset is that value because i initially didn't use rfc2307 > attributes, but instead had > > idma...

...another thread I suggested to set the rfc2307 info automatically when a > domain is provisioned with --use-rfc2307. Possibly by an additional > parameter. > This would make things easier in my eyes. > > Thanks > Tim > > Am 29. Januar 2015 22:02:14 MEZ, schrieb Hans-Kristian Bakke > <hkbakke at gmail.com>: >> >> It is actually rather easy to set the attributes via powershell, and >> that is probably the best way to add them in a Server 2012 R2 >> environment. >> >> I wrote a powershell script to do this automatically for users and...

I needed to install rmagick/GraphicsMagick on an IntelMac and did so from Darwinports. Some things work and others don''t work, like rendering fonts which needs X11 fonts and X server. The rmagick page at rubyforge points to .. http://developer.apple.com/opensource/tools/runningx11.html where X11 link to Apple is broken. X11User.pkg talked about on the page above no longer exists at

On 30/01/15 17:29, Hans-Kristian Bakke wrote: > On one of your DCs? As in you run Samba for your DCs? > > This thread was using Server 2012 R2 as DCs, and that was what my > response was aimed at. I am also using Server 2012 R2 for DCs. In this > case the Administrator is "just a user" seen from the linux boxes....

...and all calls terminated). I can not see any weird behaviour from asterisk. When RNR is received, it stops sending setup messages to the far end. Which is correct. We have managed to agree on a test session with the telco, but first I would like to know if anyone else has experienced this. Knut Bakke. __________________________________ Do you Yahoo!? Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus

On 30/01/15 16:55, Hans-Kristian Bakke wrote: > I still do not follow you. An additional reason for including > administrator in the first place, not including that I actually want > it to work against the linux boxes like every other domain user, was > because winbind returns the exact same mapping when using idmap > bac...

...nd ssh allowgroups and you are done. This works beatifully in several well tested and abused production systems, also with ACLs with administrator added. -- Hans-Kristian On 30 January 2015 at 11:01, Rowland Penny <rowlandpenny at googlemail.com> wrote: > On 29/01/15 22:56, Hans-Kristian Bakke wrote: >> >> Something went wrong and the message got sent before it was finished. >> Here is the complete one: >> >> Ok, it's here: http://pastebin.com/JEnr5wUq >> >> The id_offset is that value because i initially didn't use rfc2307 >> attri...

On 30/01/15 16:20, Hans-Kristian Bakke wrote: > I do not understand the point about issues with administrator beeing > mapped to a "random" rfc2307 UID. You need to explain the details > surrounding that part to me as my experience is that this is OK and > even necessary. > > The only reason for not giving Ad...

...f. To get identical uid/gids have to start with the same offset. If you have a fresh domain and just starting with AD-integration on your linux-boxes you can just pull out the logic for generating winbind compatible uids/gids. - Regards, Hans-Kristian On 29 January 2015 at 23:53, Hans-Kristian Bakke <hkbakke at gmail.com> wrote: > Ok, it's here: http://pastebin.com/JEnr5wUq > > The id_offset is that value because i initially didn't use rfc2307 > attributes, but instead > > > On 29 January 2015 at 23:27, Tim <lists at kiuni.de> wrote: >> @Hans-Kris...

It is actually rather easy to set the attributes via powershell, and that is probably the best way to add them in a Server 2012 R2 environment. I wrote a powershell script to do this automatically for users and groups in an entire domain that should be pretty generic to be reused. It also mirrors the logic used in automatic winbind UID/GID generation to be able to coexist in an environment where

...from 2014 on the first hit; https://samba.samba.narkive.com/eqkNlbnm/new-group-membership-not-taken-into-account-on-member-servers Exactly the same problem. So I tried this; service winbind stop rm /var/cache/samba/netsamlogon_cache.tdb service winbind start Suggested by Hans-Kristian Bakke. And low and behold, the user immediately got the new membership. All of the users actually. member server; # smbd -V Version 4.13.13-Debian domain controller; # smbd -V Version 4.17.10-Debian -- Harald Hannelius | harald.hannelius/a\arcada.fi | +358 50 594 1020

Hi. I need to use '-s' with syslinux, in order to make it work on my Dell CpiA 366 laptop *when I use 1722kB floppies*. Plain 1440kB floppies work w/o '-s'. 1722kB images work well with bochs without the use of '-s'. http://bochs.sf.net/ Thanks, Dag B http://syslinux.zytor.com/faq.php "The -s option, if given, will install a "safe, slow and stupid"

...ow did you automate this? @Andrew: In another thread I suggested to set the rfc2307 info automatically when a domain is provisioned with --use-rfc2307. Possibly by an additional parameter. This would make things easier in my eyes. Thanks Tim Am 29. Januar 2015 22:02:14 MEZ, schrieb Hans-Kristian Bakke <hkbakke at gmail.com>: >It is actually rather easy to set the attributes via powershell, and >that is probably the best way to add them in a Server 2012 R2 >environment. > >I wrote a powershell script to do this automatically for users and >groups in an entire domain that s...

...guments. I find it rather confusing that you use arguments for the Samba DC in a thread for a Server 2012 R2 use case but that might just be me. -- Regards, Hans-Kristian On 30 January 2015 at 18:12, Rowland Penny <rowlandpenny at googlemail.com> wrote: > On 30/01/15 16:55, Hans-Kristian Bakke wrote: >> >> I still do not follow you. An additional reason for including >> administrator in the first place, not including that I actually want >> it to work against the linux boxes like every other domain user, was >> because winbind returns the exact same mapping...

...or you can throw it in the garbage if you want to :) I was worried that there were any technical consequences that I somewhat had missed for years. Regards, Hans-Kristian On 30 January 2015 at 17:35, Rowland Penny <rowlandpenny at googlemail.com> wrote: > On 30/01/15 16:20, Hans-Kristian Bakke wrote: >> >> I do not understand the point about issues with administrator beeing >> mapped to a "random" rfc2307 UID. You need to explain the details >> surrounding that part to me as my experience is that this is OK and >> even necessary. >> >>...

I have my new servers up and going with Samba and LDAP on them. Now I have to add my users. Here is my problem. I have written a perl script that reads a file and adds users to different groups depending on what grade they are in and it also generates a random password, that it exports to a master list. The old script would add the user to unix and then to samba, along with the password

Hi all, I have a series of measurements made over different types of road surfaces and capacity that I want to summarize in tables via LaTeX. Ideally I'd like a table similar to this ( http://www.andy-roberts.net/misc/latex/tutorial4/multirow.png ) with mean/SD of the measurement broken down by road type (both surface and capacity). Ideally it would be extensible so that when I add layers

Hi I have upgraded from samba 3.6.19 to samba 4.0.13 on Debian Wheezy 64-bit with Samba 4.0.13 from wheezy-backports. I use winbind to authenticate against a two-server AD domain on Server 2012 functional level and forced LDAPS. After upgrading from 3.6.19 to 4.0.13 everything still works for me as usual. That is samba shares authentication, all things relying on the keytab, SSO logins with SSH

In my new bash script, I'm doing what I think is a very simple rsync command the way I'm used to doing it. I just do a lot of setup and checking before I get to it. When I run it, it gets very unhappy with me. It's probably something very simple. I need to build the rsync command in a string so that some things can go away - like if my variables DRY_RUN and DELETE are undefined,