search for: authreq

...not to display the error but nothing occurs in the CLI. If I enable debug I see the following with the option calltokenoptional = 0.0.0.0/0.0.0.0 in iax2.conf in the general section. On the sending Server Asterisk 1.2.x Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: AUTHREQ Timestamp: 00007ms SCall: 01471 DCall: 00004 [192.168.42.251:4569] AUTHMETHODS : 3 CHALLENGE : 138954087 USERNAME : priv Tx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: INVAL Timestamp: 00000ms SCall: 00004 DCall: 01471 [192.168.42...

...CALLING TRANSIT : 0 CALLING NAME : LANGUAGE : en USERNAME : inboundcontext FORMAT : 8 CAPABILITY : 65407 ADSICPE : 2 DATE TIME : 2010-11-25 17:01:46 Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: AUTHREQ Timestamp: 00011ms SCall: 00403 DCall: 00006 [212.11.91.201:4569] AUTHMETHODS : 3 CHALLENGE : 167512360 USERNAME : inboundcontext Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: INVAL Timestamp: 00000ms SCall: 00006 DCall: 00403 [2...

...0P card for PSTN connectivity. Both are on public Internet IPs with substantial bandwidth available. So far as I can tell from debug output, the difference seems to be that on the failed calls, a signal of Type: Voice comes first, whereas on a good call this doesn't happen until after the AUTHREQ. Any insight into this problem would be greatly appreciated. If more information is needed to analyze this effectively, please let me know what you need. Thanks! Sincerely, Matthew Farley ------------------------------------------------------------------ My iax.conf entry: (my ip is 208.22...

...CALLING NAME : Marian_Rychtecky LANGUAGE : en USERNAME : <some_username> FORMAT : 2 CAPABILITY : 2097151 ADSICPE : 2 DATE TIME : 2006-10-18 10:16:14 Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: AUTHREQ Timestamp: 00006ms SCall: 00003 DCall: 00004 [213.160.177.186:9785] AUTHMETHODS : 3 CHALLENGE : 585590037 USERNAME : VALSABBIA-SLOVENSKO Tx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: INVAL Timestamp: 00000ms SCall: 00004 DCall: 0000...

All, Has anyone seen INVAL messages on an IAX link before? I'm occasionally getting them from my Gateway provider, and I need to narrow down the potential cause. Symptoms are: Incoming calls fail, I see NEW, AUTHREQ then INVAL messages between the two A*k boxes... then for no reason at all it'll start working ok again.. My Asterisik: 1.2.10, Gateway A*k : 1.2.0 - Any known issues with IAX on either? My best guess so far is that the packets are getting corrupted on-route.. and I've...

...A ----------- B ---------- --------------+ 17 +-----------------+ 18 | ----------- ---------- But when I call this number and debug the IAX-transmissions I get something like: NEW from 18 to 17.A AUTHREQ from 17.B to 18 (f....) INVAL from 18 Why comes this AUTHREQ from 17.B and not from 17.A? Why can't I directly speak with the main IP over IAX? The whole thing works great when DUNDI is connected directily to the IP ASTERISK listens to. What can I do? Thanks for your answer. Best regards...

...ient sends a module name terminated by LF, and the module is present, and doesn't require authentication, a "@RSYNCD: OK"(LF) is sent. If the modules is not present an "@ERROR: data"(LF) is sent to the client. If authentication a "@RSYNCD: AUTHREQ <challenge>" is sent, in which case the client must respond with <user> <response> where 'response' is the MD4 hash of password+challenge in base64. Examples: +====================================================================+ | Modules L...

...i always get 'No one is available to answer this time, try again later'. I hv portforwarded tcp 4569 and 5060 from my firewall to my asterisk server. Any idea what else is missing. Debug info -- Called fwd/393393612 Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: AUTHREQ Timestamp: 00015ms SCall: 02703 DCall: 00002 [65.39.205.121:4569] AUTHMETHODS : 3 CHALLENGE : 207142319 USERNAME : 686928 Tx-Frame Retry[000] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass: AUTHREP Timestamp: 00098ms SCall: 00002 DCall: 02703 [65.39.205.121:4...

...navailable <************************************** LANGUAGE : en USERNAME : voicepulse-in-01 FORMAT : 4 CAPABILITY : 1086 ADSICPE : 2 DATE TIME : 171511810 Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: AUTHREQ Timestamp: 00015ms SCall: 00001 DCall: 00335 [66.234.228.170:4569] AUTHMETHODS : 4 CHALLENGE : 123344711 USERNAME : voicepulse-in-01 Rx-Frame Retry[No] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass: AUTHREP Timestamp: 00049ms SCall: 00335 DCall: 0000...

What settings are people using? I've seen the ones from dslreports but I'm in that lucky group of people that paid the 1 euro just to have it no longer work. Even after I setup a additional account over the weekend it still doesn't work. And, of course, etherreal only shows encrypted traffic so I can't snag any config settings from it. Any assistance? -----Original

...CALLING NUMBER : 52285 *** my FWD number CALLING NAME : Steve FWD *** the caller-id name in the BudgeTone phone LANGUAGE : en FORMAT : 2 CAPABILITY : 2 ADSICPE : 2 Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: AUTHREQ Timestamp: 00001ms SCall: 00002 DCall: 00058 [12.37.165.130:4569] AUTHMETHODS : 4 CHALLENGE : 206606603 USERNAME : iaxtel *** This challenge makes it look it starts right off with MD5 auth. *** I don't see anything RSA-looking. Rx-Frame Retry[No] -- OSeqno:...

I posted this question a while back, and I'm posting again in hopes that someone has some ideas. Sorry if you've already seen this. When dialing out using a SIP or IAX provider (Broadvoice, SimpleTelecom, VoicePulse Connect) I often find that after the call is answered the first few seconds of audio are cut off (i.e. I don't hear the called party). This usually results in the called

...: 0 CALLING NAME : Gres LANGUAGE : en CALLED CONTEXT : centos-context USERNAME : iax1Centos FORMAT : 4 CAPABILITY : 65535 ADSICPE : 2 DATE TIME : 2008-02-26 01:50:30Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: AUTHREQ Timestamp: 00010ms SCall: 00001 DCall: 00001 [192.168.0.25:4569] AUTHMETHODS : 3 CHALLENGE : 667712244 USERNAME : iax1CentosRx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass: AUTHREP Timestamp: 00100ms SCall: 00001 DCall: 00001 [192.168.0.25:4569]...

...ends) to CVS stable (CVS-v1-0-06/17/05-13:15:49). Jun 17 13:46:17 NOTICE[15942]: chan_iax2.c:4053 authenticate: No way to send secret to peer 'a.b.c.d' (their methods: 4) Immediately after that, I'll see frames go by with Tx-Frame Retry[000] Subclass: NEW Rx-Frame Retry[ No] Subclass: AUTHREQ Tx-Frame Retry[000] Subclass: AUTHREP Rx-Frame Retry[ No] Subclass: ACCEPT that make it look very much like rsa authentication is being done, and the call is accepted. I noticed this while cleaning up my IAX config...moving away from type=friend entries to a type=user and a type=peer entry for eac...

...d it happen on earlier 1.4.x releases), the call does not succeed. Ultimately, Server A will Hangup the call (based on my dialplan), as the authentication between the servers does not succeed. While this is going on, on Server B I can see (with IAX debugging turned on) that B replies with multiple AUTHREQ requests to A. A does not seem to see them, but issues IAX "NEW" packets as well as "LAGRQ" packets. (It doesn't matter though what asterisk version is running on A, 1.2.x or 1.4.x) Does anyone have an RSA authenticated setup working with a 1.4.x based asterisk server recei...

...92.168.50.66:4569] VERSION : 2 CALLING NUMBER : 700000000 CALLING NAME : IaxComm User FORMAT : 2 CAPABILITY : 2 USERNAME : 100 CALLED NUMBER : 200 DNID : 200 Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: AUTHREQ Timestamp: 00015ms SCall: 00002 DCall: 10490 [192.168.50.66:4569] AUTHMETHODS : 3 CHALLENGE : 479986104 USERNAME : 100 Rx-Frame Retry[Yes] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW Timestamp: 00001ms SCall: 10490 DCall: 00000 [192.168.50.66:4569...

...:4569] VERSION : 2 CALLED NUMBER : 8231xxxx CALLING NUMBER : 024625xxxx LANGUAGE : en FORMAT : 2 CAPABILITY : 2 ADSICPE : 2 DATE TIME : 146315671 jazz*CLI> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: AUTHREQ Timestamp: 00003ms SCall: 16385 DCall: 16386 [<snipped>:4569] AUTHMETHODS : 4 CHALLENGE : 207264430 USERNAME : iaxtel jazz*CLI> Rx-Frame Retry[No] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK Timestamp: 00003ms SCall: 16386 DCall: 16385 [<sn...

...X2/XXXXX:XXXXX@cts-au.freshtel .net/+6139XXXX|60|r") in new stack -- Called XXXXXX:XXXXXX@cts-au.freshtel.net/+6139XXXXXX Aug 10 20:15:39 WARNING[114695]: chan_iax2.c:5284 socket_read: Call rejected by 202.168.7.131: No such context/extension Sniffing that, I get a NEW (Me -> Firefly) AUTHREQ (Firefly -> Me) AUTHREP (Me -> Firefly) REJECT (Firefly -> Me) ... More junk So I assume my auth is being refused. What have I missed here? Does anyone currently have firefly working like this with * and would care to share their setups? :) I've just started playing with this stuff...

...SNTN : 0 CALLING TYPEOFN : 0 CALLING TRANSIT : 0 CALLING NAME : Unavailable LANGUAGE : en FORMAT : 256 CAPABILITY : 58638 ADSICPE : 2 DATE TIME : 2010-02-08 09:04:54 Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 001 Type: IAX Subclass: AUTHREQ Timestamp: 00019ms SCall: 00655 DCall: 00219 [77.75.0.135:4569] AUTHMETHODS : 4 CHALLENGE : \x31\x31\munged USERNAME : 012XXXXXXXX Rx-Frame Retry[ No] -- OSeqno: 001 ISeqno: 001 Type: IAX Subclass: ACK Timestamp: 00019ms SCall: 00219 DCall: 00655 [77.75.0...

Has anyone had problems getting their preffered codecs on the Teliax web interface taking effect? I have two accounts, two separate yet similarly configured * servers. On one account the settings took right away - on another server I am getting no result. In fact, no matter what I change the settings to, only the old codecs are usable (otherwise * says it can't negotiate a codec). Teliax