search for: ath0

...have many wireless adapters with ath(4), but only the one based on PCMCIA is making problems on FreeBSD. I cannot boot my notebook with the device inserted into the port, or it will render the system unusable (100% load on cbb(4)). And all I can see is the following: Jul 12 14:58:39 link kernel: ath0: ath_chan_set: unable to reset channel 1 (2412 Mhz, flags 0x480 hal flags 0xc0), hal status 0 Jul 12 14:58:40 link kernel: ath0: ath_chan_set: unable to reset channel 6 (2437 Mhz, flags 0x480 hal flags 0xc0), hal status 3233070656 Jul 12 14:58:41 link kernel: ath0: ath_chan_set: unable to reset cha...

...BSD hasking.alashan.nongo 7.1-STABLE FreeBSD 7.1-STABLE #3: Thu Feb 5 21:10:45 CET 2009 root@hasking.alashan.nongo:/usr/obj/usr/src/sys/HASKING i386 I tried using my ath based D-Link DWL G650, which still seems to have some issues in regard to interrupt handling: Feb 17 20:15:21 hasking kernel: ath0: <Atheros 5212> mem 0xd0210000-0xd021ffff irq 3 at device 0.0 on cardbus0 Feb 17 20:15:21 hasking kernel: ath0: [ITHREAD] Feb 17 20:15:21 hasking kernel: ath0: WARNING: using obsoleted if_watchdog interface Feb 17 20:15:21 hasking kernel: ath0: Ethernet address: 00:19:5b:3a:82:be Feb 17 20:15...

...e howto and apply it to two ubuntu machines each with two 802.11b/g interfaces. However, I cannot get a connection. I would like the 4 interfaces to create 2 ad hoc links on separate channels. I have set this up successfully with the following: /etc/dbus-1/event.d/25NetworkManager stop wlanconfig ath0 destroy wlanconfig ath0 create wlandev wifi0 wlanmode adhoc iwconfig ath0 essid ''adhoc0'' iwconfig ath0 channel 1 iwconfig ath0 key ''password'' ifconfig ath0 up ifconfig ath0 192.168.0.YYY ifconfig ath0 netmask 255.255.255.0 ifconfig ath0 broadcast 192.168.0.255 w...

Hi, I am using netem to add loss and then adding another qdisc within netem according to the wiki. Then i want to change the netem drop probability without having to delete the qdisc and recreate it. I try it but I get invalid argument: thorium-ini hedpe # tc qdisc add dev ath0 root handle 1:0 netem drop 1% thorium-ini hedpe # tc qdisc add dev ath0 parent 1:1 handle 10: xcp capacity 54Mbit limit 500 thorium-ini hedpe # tc -s qdisc ls dev ath0 qdisc netem 1: limit 1000 loss 1% Sent 0 bytes 0 pkts (dropped 0, overlimits 0) qdisc xcp 10: parent 1:1 capacity 52734Kbit limi...

Hi, I am trying to control bandwidths of the connections by using TC with HTB. But I want to implement Leaky Bucket on this structure so as to have a straight flow. Due to being new in this area, could anyone help me how I could do this? Does TC support leaky bucket? Best regards, Fatih Duzova

...using dkms and the madwifi rpms from rpmforge. My modprobe.conf has a line: alias wifi0 ath_pci I can ifconfig wifi0 up But the command: /usr/sbin/wpa_supplicant wpa_supplicant -dd -D madwifi -i wifi0 -c /etc/wpa_supplicant/wpa_supplicant.conf fails. Now some of my old notes mention using ath0 and a line in modprobe.conf of: alias ath0 ath_pci options ath_pci autocreate=sta I think there were some iwconfig commands somewhere too. But it is all gone....... sniff. I hope someone can help? I am going through this list's archives trying to find my old messages too.

...t labelled as 'appropriate' transmit speeds for 802.11g. 'Twould be nice to have them all uniformly listed.) Secondly, I was under the impression that 802.11g could support up to 54Mbps. Does FreeBSD not provide support for speeds that fast (ISTR it did at one point)? # ifconfig ath0 ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet6 fe80::20f:b5ff:fe20:71ed%ath0 prefixlen 64 scopeid 0x1 inet 192.168.132.146 netmask 0xffffff00 broadcast 192.168.132.255 ether 00:0f:b5:20:71:ed media: IEEE 802.11 Wirel...

...ettings until output slowed down to the reasonable pace. * what facility does wpa_supplicant use, when forced to syslog by -s switch? ======================================================================= * OS: RELENG_7 cvsup'ed on May 11th @ 15:30EST, if_ath is loaded as the module * HW: ath0@pci0:3:0:0: class=0x020000 card=0x058a1014 chip=0x1014168c rev=0x01 hdr=0x00 vendor = 'Atheros Communications Inc.' device = 'AR5212 Atheros AR5212 802.11abg wireless' class = network subclass = ethernet ath0: <Atheros 5212> mem 0xedf00000-0xedf0...

...168.0.8 dev eth1 192.168.2.0/24 via 192.168.0.8 dev eth1 192.168.1.0/24 via 192.168.0.8 dev eth1 192.168.0.0/24 dev eth1 proto kernel scope link src 192.168.0.1 127.0.0.0/8 dev lo scope link default via 83.x.x.x dev eth0 router B: eth0 --> 192.168.0.8 ( direct RJ45 connection to router A ) ath0 --> 192.168.3.1 ( wireless AP -- only for bridging with router C ). ath1 --> 192.168.1.1 ( wireless AP, for clients ) ath2 --> 192.168.2.1 ( wireless AP, for clients ) routing table B: 192.168.5.0/24 via 192.168.3.2 dev ath0 192.168.4.0/24 via 192.168.3.2 dev ath0 192.168.3.0/24 dev ath0...

Hi, Question on setting up networking in xen. I want to do the following on my laptop: dom0 is attached to eth0 and ath0. dom1 is going to by my virtual firewall for all my virtual machines. So I assume 3 interfaces, a bridge to eth0, ath0 and a virtual interface? dom2 and so on will route all their traffic through dom1 (through the virtual interface) I''ve read the documentation a few times, and I keep g...

...I'm using Madwifi and its interface is correctly listed and working but I cannot connect to any wifi AP without NetworkManager. I've two interfaces: eth0 and wifi0. Starting NetworkManager doesn't show any notification icon in the top right in gnome and I believe its only activating the ath0 instead of wireless interface wifi0 but still I am unable to see any of the notification icon in the gnome as I was used to in past for any of the NICs. The error which I recieve upon logging into the gnome is: "The NetworkManager applet could not find some required resources. It cannot conit...

Hello! Well-known thing is abusive use of ping abillity to fill out the ICMP packet with '+++ATH0', which will cause hangup on 'bad' modems. The defense, at the clinet side, is to add 'S2=255' to modem settings. This 'technique' is used in irc wars, and other abusive attacks, and shell providers have a lot of problems with that. There are two ways to forbid users o...

...rver, get prompted for a login then it just hangs and eventually times out. The same clients, when using their LAN ports to connect to the same server, are able to do everything--browse and access Samba shares. I have experimented with the smb.conf file to include the wireless AP's device (ath0), subnet and even allowing it to bind on all interfaces. During those times, samba *does* bind on the device/device's IP when doing 'netstat -tln'. I have also checked my firewall settings. The rules I have for my local LAN on eth1 is identical to ath0 so I don't see a problem t...

...rdwaj <rahul_bhardwaj36in at yahoo.co.in> wrote: > Hello to all, > > I am stating my problem below in detail so that you all can understand it properly. > > I am having setup of Linux box. In that box I am having one Ethernet interface eth0 and one wireless interface ath0. I have also configured one vlan port as eth0.100 with the help of vconfig (vconfig add eth 100). Now I have created two bridges br1 and br100. I have added eth0 into br1 so br1 is having only one interface. I have added ath0 and eth0.100 into br100. Physically eth0 is connected to a switch...

...p. So the box 1 has wifi in the blocking mode. When we ping from box 1 to box 2, lots of packages lost. Ping from box 2 to box 1 does not has this problem. After we tracing the code, we noticed that the box try to using wifi to send the packages which is in blocking mode. This happens because the ath0 is returned from the forwarding database. It's implemented in __br_fdb_get(br, dest). >From the etherreal, I noticed, that the STP package is broadcast from the box 2. From the function br_handle_frame(), if a stp package is received, it will update the forwarding database. Since the STP p...

...o make a wireless mesh network with b.a.t.m.a.n. protocol, and I would like to secure the wireless links with tinc. My test network is 2 wireless routers with OpenWRT Kamikaze firmware, and the network topology is the following: |CLIENT|eth0: 192.168.180| <--> |eth0: 192.168.1.1|MESH-NODE|ath0: 192.168.5.54| <~~> |ath0: 192.168.5.51|GW|eth1: 192.168.1.51| <--> |INTERNET| |eth0: 192.168.2.50|...

I am doing some testing of openwrt'd wireless access points, using madwifi-ng'd atheros radios. In the test configuration, I have three devices in a triangle, each has wds links to the other two devices. The ath0 interface is in ap mode, ath1 is a wds link to one device, and ath2 is a wds link to the other device. All three interfaces (and an ethernet interface) are in a bridge (br-lan) with STP on. The weird thing is that STP doesn't seem to ever block ports. The same firmware is on all three device...

...ow whether it works in -CURRENT. Over here I have the dmesg: http://junk.quis.cx/VNViVksv/blackbox.dmesg.txt I haven't compiled it in, it didn't boot that way (kernel panic iirc). When I kldload if_ath I get this: ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) ath0: <Atheros 5212> mem 0xc9000000-0xc900ffff irq 18 at device 1.0 on pci5 ath0: [ITHREAD] ath0: unable to attach hardware; HAL status 3 device_attach: ath0 attach returned 6 # pciconf -l | grep ath ath0@pci0:5:1:0: class=0x020000 card=0x2052168c chip=0x001a168c rev=0x01 hdr=0x00 Full pciconf...

...| | | | | --------------------------------------------------------------------- | | (dequeue to hardware) | The configuration script is : $ tc class add dev ath0 parent 1: classed 1:1 htb rate 100kbps ceil 100kbps burst 2k $ tc class add dev ath0 parent 1:1 classed 1:10 htb rate 30kbps ceil 60kbps burst 2k prio 0 $ tc class add dev ath0 parent 1:1 classed 1:20 htb rate 10kbps ceil 100kbps burst 2k prio 1 $ tc class add dev ath0 parent 1:1 classed 1:30 htb r...

I am using the madwifi driver with the patch to allow changing of the MAC address and I have two other ethernet interfaces plus a pppoe interface. My outbound connection is ppp0. I have ath0, eth1, eth2 for internal interfaces. I have added these three interfaces to br0. Once the traffic leaves the linux router, it gets NAT'd and goes out through ppp0. All traffic on all segments works to reach the internet. Traffic cannot pass between the physical bridge interfaces. eth1 cann...