search for: ata66

...rything works normal except when booting, the drives are set into UDMA33 mode: atapci0: <Intel ICH5 SATA150 controller> port 0xfc00-0xfc0f,0-0x3,0-0x7,0-0x3,0- 0x7 irq 0 at device 31.2 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ad0: DMA limited to UDMA33, non-ATA66 cable or device ad0: 76319MB <ST380013AS> [155061/16/63] at ata0-master UDMA33 ad1: DMA limited to UDMA33, non-ATA66 cable or device ad1: 76319MB <ST380013AS> [155061/16/63] at ata0-slave UDMA33 I read somewhere that this message is a hoax and that the drive should actually work in UDM...

...s, since the logfile got full and the size went over 100K, it tried to rotate the log to save diskspace. (Apr 16 21:00:00 omikron newsyslog[32137]: logfile turned over due to size>100K) My server box is a Intel Celeron 733Mhz, 384Mb of RAM.. yet it's slow from time to time since I only run ATA66 due to the old motherboard. When this "attack" occured yesterday, the box almost died and the box were working 100%.. all users who were logged in got "spammed" since the default *.emerg in /etc/syslog.conf is set to "*" .. Isn't this a quite simple way of making...

....76Gb that it really is. I found the HD model number with Google on someone elses dmesg and got the correct CHS: ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] This is what is shown before sysinstall launches, with the stuff in parentheses as ASCII characters: ad0: dma limited to UDMA33, non-ATA66 cable or device ad0: 692MB <(smiley face black)C 5(smiley face white)0(heart)0(smiley face black)T@A 4!0> [1407/16/63] at ata0-master UDMA33 Thanks, Brad Davis

...e worked fine again for maybe 12 hours but then encountered the same type of errors which start with stuff along the lines of: Sep 26 05:59:35 www /kernel: ad0: READ command timeout tag=0 serv=0 - resetting Sep 26 05:59:35 www /kernel: ata0: resetting devices .. ad0: DMA limited to UDMA33, non-ATA66 cable or device After a few of these the machine stops being able to access its drives and eventually either reboots or hangs. After searching for a bit I saw that disabling DMA access altogether might help the situation out so I have done that at startup which now gives me the following initi...

...1572864 4.2BSD 2048 16384 94 # (Cyl. 1560*- 38791*) **************************************************************** I have that (to me) crypted errore message.. can anybody tell me what does that UDMA ICRC error means? May 24 19:58:30 saturn /kernel: ad0: DMA limited to UDMA33, non-ATA66 cable or device May 24 19:58:30 saturn /kernel: ad0: 9770MB <Maxtor 91021U2> [19852/16/63] at ata0-master UDMA33 May 24 19:58:30 saturn /kernel: ad1: 19092MB <Maxtor 2B020H1> [38792/16/63] at ata1-master UDMA33 May 24 19:58:30 saturn /kernel: Mounting root from ufs:/dev/ad0s1a May 24...

I came into an Abit AX8 motherboard and single core AMD Athlon 64 FX. I did a quick install of CentOS 5.0 on it to make sure everything worked and then returned the hard disk and case to the original owner. After getting a new case and hard disk, I downloaded the CentOS 5.1 cd images and installed. For some reason the motherboard's on board sound no longer works (worked with CentOS

...a Supermicro370SWD with an Intel 810 "Whitney" chipset (82810DC100 GMCH + 82801AA ICH). The docs say that there is support for UDMA66, but FreeBSD reports that the drive is being set to UDMA33. I booted in verbose mode, and here are the relevant parts from dmesg. atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 14 eb ata0: mask=03 stat0=50 stat1=10 ata0-master: ATA 01 a5 ata0: devices=09 ata0: at 0x1f0 irq 14 on atapci0 .....

...5P chipset. Attempt to install both 5.1-R and 4.8-20030810 snap have failed. I've turned off every onboard device in the BIOS that is possible. During the install of 5.1 the system hangs at acpi_cpu0: throttling enabled: 8 steps (100% to 12.5%), currently 100%. ad4: DMA limited to UDMA33, non ATA66 cable or device ad4: 156334MB (Maxtor 6Y160L0) [3912632/16/63] at ata2-master UDMA33 acd0: DVD-ROM () at ata3-master UDMA33 Mounting root from UFS:/dev/md0 (at this point the system just sits here) This drive has been tested in another system and does come up as UDMA100 on this cable. in 4.8 th...

I'm getting this message in my logwatch email notification: --------------------- Kernel Begin ------------------------ WARNING: Kernel Errors Present sdb:<3>Buffer I/O error on device sdb, l ...: 2 Time(s) Buffer I/O error on device sdb, l ...: 12 Time(s) hde: dma_intr: error=0x84 { DriveStat ...: 12 Time(s) hde: dma_intr: status=0x51 { DriveReady

Well, after much trial and tribulation I got to the point I could nfs mount the CentOS 6.0 i386 iso image and try an install. So I stuck in the net install CD (latest from CentOS), mounted the nfs iso image and gave it several shots. It goes swimmingly until I click "write disks". Then there's a kernel panic. This with both the graphic and text mode installs. As mentioned,

If you start to experience problems with ata devices, please direct your report this way. Thanks -lq

Hello After compiling and booting a RH 8.0 box with a 2.4.19 vanilla kernel i've started to experience some problems on my /home partition, (i/o errors on 2 files). After rebooting the machine failed the to mount /home and dropped me in the recovery shell. The fsck is still running after 9 hours. The system is a dual athlon MP with 1Gb ram and ASUS MB. the /home patrition is mounted on 3 120

...erhouseprato.com 4.9-PRERELEASE FreeBSD 4.9-PRERELEASE #0: Mon Sep 8 18:14:24 CEST 2003 gmarco@freebsd.computerhouseprato.com:/usr/obj/usr/src/sys/FREEBSD i386 Sep 16 07:55:07 freebsd /kernel: DUMMYNET initialized (011031) Sep 16 07:55:07 freebsd /kernel: ad0: DMA limited to UDMA33, non-ATA66 cable or device Sep 16 07:55:07 freebsd /kernel: ad0: 19464MB <SAMSUNG SV2044D> [39546/16/63] at ata0-master UDMA33 Sep 16 07:55:07 freebsd /kernel: acd0: CDROM <FX4820T> at ata0-slave PIO4 Sep 16 07:55:07 freebsd /kernel: Mounting root from ufs:/dev/ad0s1a Sep 16 07:55:07 freebsd /ke...

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commits by sos@ to CVS (around Jan 2008), but have

...00)---195 °º´ï VP266+128M DDR------430 VP266 (Socket370,VIA/APOLLO/PRO266/AC97)----300 VK266 (SocketA,KT133A/686B/AC97/ATA100)---280 VT-133PLUS(SocketA,KT133/686B/AC97/ATA100)---280 ID815E (Socket370,i815E/i752/AC97/ATA100)-----285 ID815EP (Socket370,i815EP/AC97/ATA100)----280 ID810 (Socket370,i810/ATA66/i752ÏÔ¿¨/AC97Éù¿¨)------210 VP4-133PLUS(Socket370,VIA694x/686B/AC97/ATA100)----240 Vp4-133/M (Socket370,VIA694/596B/CMI8738Éù¿¨/ATA66)--210 VP-133 (Socket370,VIA693A/596B/CMI8738Éù¿¨/ATA66)---220 SIS730S (SocketA,SiS300/AC97/10/100MÍø¿¨)-----235 SIS630E (Socket370,SIS630E/SiS300ÏÔ¿¨/AC97)----255 B:...

...00)---195 °º´ï VP266+128M DDR------430 VP266 (Socket370,VIA/APOLLO/PRO266/AC97)----300 VK266 (SocketA,KT133A/686B/AC97/ATA100)---280 VT-133PLUS(SocketA,KT133/686B/AC97/ATA100)---280 ID815E (Socket370,i815E/i752/AC97/ATA100)-----285 ID815EP (Socket370,i815EP/AC97/ATA100)----280 ID810 (Socket370,i810/ATA66/i752ÏÔ¿¨/AC97Éù¿¨)------210 VP4-133PLUS(Socket370,VIA694x/686B/AC97/ATA100)----240 Vp4-133/M (Socket370,VIA694/596B/CMI8738Éù¿¨/ATA66)--210 VP-133 (Socket370,VIA693A/596B/CMI8738Éù¿¨/ATA66)---220 SIS730S (SocketA,SiS300/AC97/10/100MÍø¿¨)-----235 SIS630E (Socket370,SIS630E/SiS300ÏÔ¿¨/AC97)----255 B:...

...work: 2 100MB Full Duplex Switches. CAT 5 twisted pair. Client1: 900MHZ PIII 512MB Ram, ATA100 40GB HD, running Windows XP with a Intel fxp type NIC Client2: 2.65 Ghz P4 1GB Ram, ATA133 120 GB HD, running Windows XP with a Intel fxp type NIC. Server: 550MHZ PIII 768MB Ram, ATA66 20GB HD, running FreeBSD 5.1p10 With a Intel fxp NIC, Samba 3.0.2 (2.2.8, 3.0, etc) SMB transfer from Client1 to Client2 6.0 MB/s both ways. FTP transfers: average 8.7 MB/s from Server to Client1. 5.7 MB/s from client1 to Server. FTP transfers: average 9.0 MB/s from Server to Clie...

...6550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: DMA limited to UDMA33, non-ATA66 cable or device ad0: 38166MB <ST340014A> [77545/16/63] at ata0-master UDMA33 acd0: DVD-ROM <DVD-ROM DDU1621> at ata1-slave PIO4 Mounting root from ufs:/dev/ad0s1a ---------------------------------------------------------------------------- -------------- I just wonder whether or not my...

...pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib2 pci1: <ATI model 5144 graphics accelerator> at 0.0 irq 11 isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C686 ATA66 controller> port 0xb800-0xb80f at device 4.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on pci 0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI...

..._____ > > Xen-devel mailing list > > Xen-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/xen-devel Thanks for your answer, Mark. I have a 4 IDE channels (2 standard channels, 2 ATA100) asus A7V Motherboard, with ATA133 HD (hde) and 2 CD/DVD reader on ATA66 channels.. My dmesg looks very strange (I''m running a mandrake-test version, so this could be the reason): ULL>28 devfs_mk_dev: could not append to parent for <NULL>29 devfs_mk_dev: could not append to parent for <NULL>30 devfs_mk_dev: could not append to parent for <NU...