search for: ata2

Hi, I have a Asterisk with two Cisco ATA connected with each other . Cisco ATA1 is connected via satellite link Cisco ATA2 is connected via leased line The problem is CISCO ATA2 can call CISCO ATA2 with no problem But CISCO ATA1 cannot call CISCO ATA2 . Any suggestion please Rabii -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/p...

Hi all, I installed CentOS 5 on DELL machine. Then, When the system comes up, I always get below erros. Could you pls help me to solve this out before I setup this box for productiuon use ? these are errors. usb 1-2: device not accepting address 2, error -71 ata2: port failed to respond (30 secs) ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=0x100) ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=0x100) ata2: SRST failed (status 0xFF) ata2: SRST failed (err_mask=0x100) ata2: reset failed, giving up I installed centos 4.4 on the sa...

...e from 9-STABLE to 10-Stable today. beasty ~ # uname -a FreeBSD beasty.schavemaker2.local 10.0-BETA3 FreeBSD 10.0-BETA3 #0 r258543: Mon Nov 25 13:23:31 CET 2013 root at beasty.schavemaker2.local:/usr/obj/usr/src/sys/KRNL amd64 After a reboot, the console gets cluttered with a lot of messages. ata2: FAILURE - zero length DMA transfer attempted ata2: setting up DMA failed These messages go on and on. ata2 is my cdrom drive! Is there something i can try? regards Johan

...ks can boot. Now sda has bad sectors, and I should replace it. But which one of the physical disks is sda?? The machine boots fine from either one of the disks, (and the booting disk of course is always called sda). In the messages log I see entries like this: Apr 29 02:21:07 a134-224 kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) By noticing which SATA link (ata1, ata2) is up and which is down, I can find out which physical disk is connected to ata1 and which to ata2. If both disks are connected, will the hd in ata1 become sda, and the hd in ata2 become sdb?? - Jussi

I''ve been following unstable day to day with mercurial but I''m still having a problem with my HVM testing. I using the i686 Centos + Bluecurve isntaller and I get the following error in the guest during disk formatting: <4>hda: dma_timer_expiry: dma status == 0x21 <4>hda: DMA timeout error <4>hda: dma timeout error: status=0x58 { DriveReady SeekComplete

Hi, Does anyone have any experience connecting Asterisk to a Meridian system using an ATA2 and x101p? The basics work -- I can make outbound calls, receive inbound, and use flash to transfer calls, but certain things do not work, specifically with calls from internal extensions. - Does the Meridian/ATA2 pass any kind of callerid info? We do not have external callerid, but I'm not...

Does anyone know which signalling protocol works when connecting the output of a NT8B90AL Norstar ATA2 analog terminal adapter to an FXO card? (fxsks, fxsgs, fxsls?) I'm trying to add an Asterisk branch to my Norstar PBX as outlined at http://www.voip-info.org/wiki-Asterisk+Nortel. - Mike

Thomas, Have spoken to Soren, from my bootlog he believes that the problem is in atapicam causing the system to lock up. He is happy to answer some questions but doesnt have time to delve into atapicam himself. Did you author atapicam, I have seen your name on the sourcecode, can you help me further? Whats next? Thanks Adam. -------------- next part -------------- An embedded message was

...0000ac R08: 0000000000000001 R09: 0000000000000006 > [ 26.755144] R10: 000000000089fc18 R11: 0000000000000246 R12: 00007ffef0289ea8 > [ 26.755853] R13: 000000000043a5f0 R14: 0000000000000000 R15: 0000000000000000 > [ 26.756560] ---[ end trace 23cc3e9021358587 ]--- > [ 26.778034] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 > [ 26.778690] ata2.00: failed command: READ DMA > [ 26.779131] ata2.00: cmd c8/00:e8:92:ad:00/00:00:00:00:00/e0 tag 0 dma 118784 in > [ 26.779131] res 50/00:00:0a:80:03/00:00:00:00:00/a0 Emask 0x40 (internal error) > [...

...a: 241254720 512-byte hdwr sectors (123522 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 241254720 512-byte hdwr sectors (123522 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete ata2.00: exception...

...LURE - READ retrying (0 retries left) LBA=0 ad4: FAILURE - SETFEATURES SET TRANSFER MODE timed out ad4: FAILURE - SETFEATURES ENABLE RCACHE timed out ad4: FAILURE - SETFEATURES ENABLE WCACHE timed out ad4: FAILURE - SETFEATURES SET_MULTI timed out ad4: 114473MB <Seagate ST3120814A 3.AAJ> at ata2-master PIO4 ad8: WARNING - SETFEATURES SET TRANSFER MODE task queue timeout - completing request directly ad8: WARNING - SETFEATURES ENABLE RCACHE task queue timeout - completing request directly ad8: WARNING - SETFEATURES ENABLE WCACHE task queue timeout - completing request directly ad8: WARNING...

...er kernel: [277113.497295] [<ffffffffa0099969>] (ahci_interrupt+0x0/0x46b [ahci]) Apr 11 04:22:29 xenserver kernel: [277113.497312] Disabling IRQ #22 Apr 11 04:22:54 xenserver kernel: [277138.645875] hdc: dma_timer_expiry: dma status == 0x64 Apr 11 04:23:00 xenserver kernel: [277145.647409] ata2.00: exception Emask 0x40 SAct 0x0 SErr 0x800 action 0x6 frozen Apr 11 04:23:00 xenserver kernel: [277145.647429] ata2: SError: { HostInt } Apr 11 04:23:00 xenserver kernel: [277145.647438] ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 Apr 11 04:23:00 xenserver kernel: [277145.647439]...

...* to primarily test its voicemail feature. I installed it on a server WITHOUT any telco board (i.e., digium). Installation looks ok, however I am having problems. MY SETUP: 2xATAs are configured to use * as GkorProxy Asterisk is registered to my SER SIP/RTP Proxy 1.) First test - ATA1 calls to ATA2. When voicemail starts playing, it just cuts-off after 5-10seconds (consistently). - Solution: I have to reconfigure ATA to use OutboundProxy to be Asterisk IP. - Am I doing the right thing? 2.) Second test: - ATA1 calls ATA2 and left a message. * sends an email to the owner of ATA2. - ATA2 re...

I'm attempting to use an asterisk box with a Digium TDM01B as voicemail for an existing Meridian/Norstar PBX with an ATA-2 adapter. We're having problems where hangup is not always (but sometimes) detected. It's not detected probably 70% of the time or more. (The users transfer callers to an extension--caller then has to navigate a menu to get to the appropriate user). After

...a: 241254720 512-byte hdwr sectors (123522 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 241254720 512-byte hdwr sectors (123522 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata2: EH complete ata2.00: exception...

...The box is CentOS-4.4 (i386) fully updated. It has a pair of SATA drives in a software raid 1 configuration. The errors I see are: ata1: command 0xca timeout, stat 0x50 host_stat 0x24 ata1: status=0x50 { DriveReady SeekComplete } Info fld=0x1e22b8, Current sda: sense key No Sense ata2: command 0xca timeout, stat 0x50 host_stat 0x24 ata2: status=0x50 { DriveReady SeekComplete } Info fld=0x1e2598, Current sdb: sense key No Sense If it was just coming from one drive, I would say it was a bad drive, but this is happening on both drives. Can anyone give me a starting place...

HI; Thanks for your reply. The reason for why I am going through asterisk in such case is just "using asterisk voicemail service" I mean: ATA1 calls ATA2, suppose ATA2 is unreachable or he is not at the office, then the call reroute (my GK is able to reroute calls if the first route is not valid) to atersik for voicemail service. Do you think I can handle it with asterisk native h323 channel???????/ Regards; mohammad ----- Original Message --...

...ore bug which I just sent a patch for, and the HVM timer bug which Dexan has just tracked down. And now I find that I''m having some kind of problem with the emulated hard disk. The OpenSUSE installer provides me with a shell prompt on Ctrl-Alt-F2 in which dmesg shows many repetions of: ata2: DRQ=1 with device error, dev_stat 0x49 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen ata2.00 cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x4a data 8 in res 41/50:03:00:00:20/00:00:00:00:00/a0 Emask 0x3 (HSM violation) ata2: soft resetting link ata2.00: co...

...0:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc <...> ata1: SATA max UDMA/133 abar m1024 at 0xdfefa400 port 0xdfefa500 irq 22 ata2: SATA max UDMA/133 abar m1024 at 0xdfefa400 port 0xdfefa580 irq 22 I've included the above, because I note the 32bit mmio, but the 64bit flag; also the clock speed for the controller. Now, I've been working on one with Penguin. I noticed one thing, that it was set to native IDE. After goo...

...e sata_nv driver. Also when I reboot it works fine for a few hours and then begins to act up again. Its not a heat problem, the drives have a working fan directly blowing on the drives, and the case its in has very good airflow. ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xD000 irq 193 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xD008 irq 193 scsi0 : sata_nv ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 320173056 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : sata_nv ata2: SATA link up 1.5 Gbps...