search for: ata133

...id Intel 845D/Socket 478/ FSB 400/ATA100/AC97/ATX/AGP 4X/RAID 490 BD7II Intel 845E/Socket478/FSB533/DMA 100/AGP4X/AC97/10M/100M Lan 460 ST6-Raid Intel 815EPT/Socket 370/AGP 4X/DMA 100/AC97/Raid/ATX 390 KX7333R VIA KT333/Socket A/ATA 133/AGP 4X/Raid/ATX 500 KR7A VIA KT266A/Socket A/FSB266/ATA133/AGP 4X/ATX 460 KR7A-Raid VIA KT266A/Socket A/FSB 266/ATA133/AGP 4X/ATX 500 VP6 VIA 694X+686B/ATX/Socket370/FSB 133MHz/DMA100/AGP4X 450 ΢ÐÇ 845E Max Intel 845E/Socket 478/FSB 533/AGP 4X/AC 97/ATX 440 845E Max2-L Intel 845E/Socket 478/FSB 533/AGP 4X/AC97/ATX/USB2.0 570 845E MX2 Int...

oops. I successfully installed RedHat 8.0 onto two ATA133 80gig drives running a mirrored RAID with the hpt37x (highpoint 372 onboard RaidController on the SOYO DRAGON motherboard.) I used ext3 as my filesystem type of choice but unfortunately the system shut down uncleanly and it now is coming up with the "press Y to force file system integrity che...

...of this report but I am not immediately sure how to proceed with this or what details will be relevant. I look after a community server which has been running just fine for the last 6 months or so with no disk issues at all. The box has an all in one Shuttle motherboard which uses the VIA 8233 ATA133 disk controller according to what I see from dmesg. The main drive is a 30 gig Maxtor and I very recently added an 80 gig Seagate to the second IDE bus. There is also a CDROM sharing the primary IDE bus with the main drive. Up until quite recently the machine has had a single drive in it and...

...at's wrong. Another image copy I made to another disk (same Maxtor model, connected to the second ATA channel of the same controller) reads fine though. The IDE disk is a Maxtor 160GB disk: ad4: 156334MB <Maxtor 4G160J8> [317632/16/63] at ata2-master UDMA133 Connected to a Promise ATA133 controller: atapci0: <Promise TX2 ATA133 controller> port 0x3000-0x300f, 0x3010-0x3013,0x3018-0x301f,0x3014-0x3017,0x3020-0x3027 mem 0xf4200000-0xf4203fff irq 11 at device 7.0 on pci2 The fdisk entry for the disk is: /dev/ad4: 317632 cyl 16 hd 63 sec Part Start...

...est: I/O error, dev sda, sector 20010000 I've wiped and scanned the drives with the Maxtor diagnostic utilities which passes both drives with flying colors. I've had no issues when i was doing the same thing with Suse 10.1, the same setup was 100% reliable. I also have two 160gig Maxtor ATA133 drive in the machine on the on board PATA controller and they work totally reliable. I'm wondering if anyone else is having a problem with on board nvidia sata controller thats part of the nforce4 chipset? btw its using the sata_nv driver. Also when I reboot it works fine for a few hours an...

...pci0 fxp0: Ethernet address 00:d0:b7:09:09:8e inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: <PCI to ISA bridge (vendor=1106 device=3147)> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8233 ATA133 controller> port 0xc400-0xc40f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 5 at device 17.2 on pc i0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHC...

...face ? 12-bit interface to external TV encoder for SDTV and HDTV display ? Support for VIA Vinyl Gold 8-channel HD Audio Controller & integrated VIA Vinyl 6-channel HD Audio ? Serial ATA support for up to 2 devices ? Integrated V-RAID 0, RAID 1, and RAID 0+1#, and JBOD (SATA) support ? Parallel ATA133/100/66 support for up to 4 devices ? Support for up to 8 USB 2.0/USB 1.1 ports ? Support for VIA Velocity Gigabit Ethernet companion controller & integrated 10/100 Mbps Fast Ethernet ? Advanced System Power Management Support

Hi, I finally set up samba 3 with ads, and acl support and everything works just great. The server is an AMD Duron 1200Mhz, 256Mb 266Mhz Ram, 2 ATA100 disks 10 Gb RAID1, 2 ATA133 200Gb RAID1 disks each one master on a separate ide port. Forgive my english, it's my 17th consecutive hour at work and I'm pretty tired. This server, that it's going to replace a win2k box, it's a fileserver, member of the active directory and has many shares that all users of the...

...SB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <USB controller> at 16.3 irq 10 isab0: <PCI to ISA bridge (vendor=1106 device=3177)> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8235 ATA133 controller> port 0xfc00-0xfc0f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pcm0: <VIA VT8235> port 0xdc00-0xdcff irq 11 at device 17.5 on pci0 pcm0: <unknown ac97 codec> (id=0x56494161) vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x...

Hey all, Had a power failure and subsequent ext3 disk corruptions. Attempting to fix, but not working. Its a 120 gig IDE disk, 3 partitions. /boot, /, and swap. Basically can't boot up since the box can't get to the system files in /usr/ or anything. So I'm booting off of a FC2 disk 1 in recovery mode and trying to fix the filesystem with e2fsck The boot partition cleaned up

...nc, and O_SYNC for comparison) - kernel-2.6.8.1.config: .config file which we used to build kernel We use the following hardware to make the data: CPU: Intel Pentium 4 3GHz Hyper Threading, 2nd cache 512KB RAM: 1GBytes IDE controller: on-board ICH5 (ATA100) HDD: E-IDE (7200rpm, 8MB cache, ATA133) x 2 (one for system and the other for writing test data) (The problem was also reproduced with a SCSI system) Regards, Seiji -- Seiji Kihara Open Source Software Computing Project, NTT Cyber Space Laboratories, Yokosuka, JAPAN -------------- next part -------------- A non-text attach...

...known card> (vendor=0x1415, dev=0x9500) at 11.1 irq 10 viapropm0: SMBus I/O base at 0x400 viapropm0: <VIA VT8233 Power Management Unit> port 0x400-0x40f at device 17.0 on pci0 viapropm0: could not allocate bus space device_probe_and_attach: viapropm0 attach returned 6 atapci0: <VIA 8233 ATA133 controller> port 0xfc00-0xfc0f at device 17.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 10 at device 17.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHC...

...server and my Windows XP setup. Allow me to list some specifics for you. And Then I'll continue. Network: 2 100MB Full Duplex Switches. CAT 5 twisted pair. Client1: 900MHZ PIII 512MB Ram, ATA100 40GB HD, running Windows XP with a Intel fxp type NIC Client2: 2.65 Ghz P4 1GB Ram, ATA133 120 GB HD, running Windows XP with a Intel fxp type NIC. Server: 550MHZ PIII 768MB Ram, ATA66 20GB HD, running FreeBSD 5.1p10 With a Intel fxp NIC, Samba 3.0.2 (2.2.8, 3.0, etc) SMB transfer from Client1 to Client2 6.0 MB/s both ways. FTP transfers: average 8.7 MB/s from...

Hi Borthers/Sisters Thanks for all the developer(s) and for all the hard work spent on build this great piece of software! I loved Dovecot since it is really easy to set up and really fast but I am really new to it (only 2 weeks and half). Right now, our server configuration is: Server: Apple Xserve G5 dual RAM: 4GB Number of Users: ~ 150 IMAP only users Authentication: LDAP Mailboxes sizes:

...SB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <USB controller> at 16.3 irq 14 isab0: <PCI to ISA bridge (vendor=1106 device=3177)> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8235 ATA133 controller> at device 17.1 on pci0 atapci0: ATA channel disabled by BIOS orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd17ff,0xd4000-0xd4fff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-...

...____________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/xen-devel Thanks for your answer, Mark. I have a 4 IDE channels (2 standard channels, 2 ATA100) asus A7V Motherboard, with ATA133 HD (hde) and 2 CD/DVD reader on ATA66 channels.. My dmesg looks very strange (I''m running a mandrake-test version, so this could be the reason): ULL>28 devfs_mk_dev: could not append to parent for <NULL>29 devfs_mk_dev: could not append to parent for <NULL>30 devfs_mk_dev:...

...new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.1: request interrupt 22 failed uhci_hcd 0000:00:1d.1: USB bus 1 deregistered uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -38 uhci_hcd: probe of 0000:00:1d.1 failed with error -38 Done. An when I try to do the same with a Promise ATA133 TX I get: "ide: Assuming 66MHz system bus speed for PIO modes PDC20269: IDE controller at PCI slot 0000:06:00.0 PCI: Enabling device 0000:06:00.0 (0000 -> 0003) PDC20269: chipset revision 2 PDC20269: ROM enabled at 0xffffc000 PDC20269: 100% native mode on irq 20 ide0: BM-DMA at 0x1000...

...new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.1: request interrupt 22 failed uhci_hcd 0000:00:1d.1: USB bus 1 deregistered uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -38 uhci_hcd: probe of 0000:00:1d.1 failed with error -38 Done. An when I try to do the same with a Promise ATA133 TX I get: "ide: Assuming 66MHz system bus speed for PIO modes PDC20269: IDE controller at PCI slot 0000:06:00.0 PCI: Enabling device 0000:06:00.0 (0000 -> 0003) PDC20269: chipset revision 2 PDC20269: ROM enabled at 0xffffc000 PDC20269: 100% native mode on irq 20 ide0: BM-DMA at 0x1000...