search for: ata1

Hi guys, sorry to be iterating this on the list once more, but I'm not able to get this stuff to work as I'd expect. So far, I've always managed to keep it out of NAT environments :-> My home LAN is NATed by a simple Draytek router. In the home LAN is an ATA186 with SIP. On the internet (public) is an Asterisk server. I have nat=yes in the sip.conf and the connectmode is set to look for the Via header. Registration works like a charm, and if I dial in from the PSTN to the ATA the phone rings properly. However, it doesn't seem to be able to star...

> ata1: port is slow to respond, this delay is known to occur on vacant SATA ports > ata1: port failed to respond (30 secs) > ata1: SRST failed (status 0xFF) > ata1: SRST failed (err_mask=0x100) > ata1: softreset failed, retrying in 5 secs > ata1: SRST failed (status 0xFF) > ata1: SRST f...

...n Emask" errors apear right after booting, when harddisks plays smoothly. the I/O errors apear only after few hours-days. Is it a known problem? (Already two posts regarding this)? Any solution or at least a way to check it? (I'm using CentOS5 with the latest updates) =============== ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception...

...and thus require high disk usage. On certain machines, I''m experiencing the following problem, after a while, I get this error in dom0''s dmesg: TA: abnormal status 0xD0 on port 0xD080EC87 ATA: abnormal status 0xD0 on port 0xD080EC87 ATA: abnormal status 0xD0 on port 0xD080EC87 ata1: command 0x35 timeout, stat 0x51 host_stat 0x61 ata1: status=0x51 { DriveReady SeekComplete Error } ata1: error=0x04 { DriveStatusError } SCSI error : <0 0 0 0> return code = 0x8000002 sda: Current: sense key=0xb ASC=0x0 ASCQ=0x0 end_request: I/O error, dev sda, sector 449410141 also in do...

...67] type=friend username=1234567 secret=1234567 callerid="ATA 1234567" host=dynamic nat=yes qualify=yes disallow=all allow=g729 canreinvite is set globally to YES. When one ATA calls another, I see the next traffic on Ethereal (just shown the sequence between one ATA and Asterisk) 1.- ATA1 -> INVITE -> Asterisk 2.- ATA1 <- 100 Trying <- Asterisk 3.- ATA1 <- 180 Ringing <- Asterisk 4.- ATA1 <- 200 OK <- Asterisk 5.- ATA1 -> ACK -> Asterisk 6.- ATA1 <- INVITE <- Asterisk (REINVITE, with the IP of ATA2 as Connection Informatio...

...raproject.org) (gcc version 4.6.1 20111003 (Red Hat 4.6.1-10) (GCC) ) #1 SMP Thu Oct 27 03:46:50 UTC 2011 [ 0.000000] Command line: initrd=initrd.img console=ttyS0,38400 console=tty0 BOOT_IMAGE=vmlinuz <snip> [ 4.310149] ata2.00: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100 [ 4.325107] ata1.00: ATA-7: QEMU HARDDISK, 0.10.2, max UDMA/100 [ 4.339397] ata1.00: 62914560 sectors, multi 16: LBA48 [ 4.362818] ata1.00: configured for MWDMA2 [ 4.373968] scsi 0:0:0:0: Direct-Access ATA QEMU HARDDISK 0.10 PQ: 0 ANSI: 5 [ 4.495976] ata2.00: configured for MWDMA2 [ 4.54...

I've installed Asterisk and configured an ATA-186 as described at this link: http://www.djernes.org/~shawn/ata186.htm Unfortunately this guide abruptly ends before it explains how to deal with the sip.conf and extensions.conf files. So I left extensions.conf alone and my sip.conf looks like this: [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Addres...

Morning All, I upgraded from 9.2-STABLE to 10.0-PRERELEASE #0 r259144 last night and I am now getting this every 2 seconds in /var/log/messages: Dec 10 07:54:31 Shop kernel: ata1: FAILURE - zero length DMA transfer attempted Dec 10 07:54:31 Shop kernel: ata1: setting up DMA failed cat /var/log/messages | grep ata1: cd0 at ata1 bus 0 scbus3 target 0 lun 0 cd0: <TSSTcorp DVD-ROM TS-H352C DE02> Removable CD-ROM SCSI-0 device cd0: 33.300MB/s transfers (UDMA2, ATAPI 12by...

...way with ATA_CAM and ada(4) to force a P-ATA disk to a lower UDMA mode? Best regards Oliver PS: Excerpt from dmesg ... atapci0: <VIA 8235 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xd800-0xd80f at device 17.1 on pci0 ata0: <ATA channel> at channel 0 on atapci0 ata1: <ATA channel> at channel 1 on atapci0 ada0 at ata0 bus 0 scbus0 target 0 lun 0 ada0: <IBM-DJNA-352500 J51OA30K> ATA-4 device ada0: 66.700MB/s transfers (UDMA4, PIO 8192bytes) ada0: 24405MB (49981680 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad0 ada1 at ata1 bus...

Hello freebsd-stable, I've got FreeBSD 4.8R and CD-RW Asus CRW-4824a (master, ata1) but when boot process: acd0: MODE_SENSE_BIG command timeout - resetting ata1: resetting .. done It repeats 15 times, then all ok boot But I can't use acd0 Alexander Potapenko -- Best regards, Amber mailto:amber@arziz.uptel.net

Hi, I have a Asterisk with two Cisco ATA connected with each other . Cisco ATA1 is connected via satellite link Cisco ATA2 is connected via leased line The problem is CISCO ATA2 can call CISCO ATA2 with no problem But CISCO ATA1 cannot call CISCO ATA2 . Any suggestion please Rabii -------------- next part -------------- An HTML attachment w...

...physical disks is sda?? The machine boots fine from either one of the disks, (and the booting disk of course is always called sda). In the messages log I see entries like this: Apr 29 02:21:07 a134-224 kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) By noticing which SATA link (ata1, ata2) is up and which is down, I can find out which physical disk is connected to ata1 and which to ata2. If both disks are connected, will the hd in ata1 become sda, and the hd in ata2 become sdb?? - Jussi

Hi, I have some errors in dmesg: [ 542.255788] ata1.00: exception Emask 0x0 SAct 0xffffff SErr 0x0 action 0x0 [ 542.255797] ata1.00: irq_stat 0x40000008 [ 542.255805] ata1.00: failed command: READ FPDMA QUEUED [ 542.255821] ata1.00: cmd 60/00:00:1a:b7:7a/04:00:1d:00:00/40 tag 0 ncq 524288 in [ 542.255824] res 41/40:00:a0:b7:7a/00:00:1d:...

...(level, low) -> IRQ 201 Jul 26 16:29:27 sauron kernel: MSI INIT SUCCESS Jul 26 16:29:27 sauron kernel: ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode Jul 26 16:29:27 sauron kernel: ahci 0000:00:09.0: flags: 64bit ncq led clo pmp pio Jul 26 16:29:27 sauron kernel: ata1: SATA max UDMA/133 cmd 0xF8874100 ctl 0x0 bmdma 0x0 irq 58 Jul 26 16:29:27 sauron kernel: ata2: SATA max UDMA/133 cmd 0xF8874180 ctl 0x0 bmdma 0x0 irq 58 Jul 26 16:29:27 sauron kernel: ata3: SATA max UDMA/133 cmd 0xF8874200 ctl 0x0 bmdma 0x0 irq 58 Jul 26 16:29:27 sauron kernel: ata4: SATA max UDMA...

I just installed centos on to a new hp box. I am it runs for a while then my screen fills with: set_rtc_mmss: can't updae from 50 to 4 ata1: command xxx timeout status xxx Can anyone please help? ******************** J. Chris McDevitt jcmcdevitt at yahoo.com 313-336-1262 ******************** ____________________________________________________________________________________ Do you Yahoo!? Everyone is raving about the all-new...

...m (1 domain0 and 2 domainU on the same machine), it is good. But, where some of them have high traffic and thus require high disk usage i get this error in dom0''s dmesg: ATA: abnormal status 0xD0 on port 0x9F7 ATA: abnormal status 0xD0 on port 0x9F7 ATA: abnormal status 0xD0 on port 0x9F7 ata1: command 0x35 timeout, stat 0xd0 host_stat 0x20 ata1: translated ATA stat/err 0xd0/00 to SCSI SK/ASC/ASCQ 0xb/47/00 ata1: status=0xd0 { Busy } sd 0:0:0:0: SCSI error: return code = 0x8000002 sda: Current: sense key: Aborted Command Additional sense: Scsi parity error end_request: I/O error, dev...

Thomas, Have spoken to Soren, from my bootlog he believes that the problem is in atapicam causing the system to lock up. He is happy to answer some questions but doesnt have time to delve into atapicam himself. Did you author atapicam, I have seen your name on the sourcecode, can you help me further? Whats next? Thanks Adam. -------------- next part -------------- An embedded message was

...and if there is some known way to prevent them? My configuration: - 2 Hitachi SATA 120 GB Harddisks - Intel P4 3GHz - Tyan Tomcat i875p motherboard - 1 GB ECC RAM - 2 Intel Gb NICs - 1 Intel 10/100 NIC Error message follows: --------------------------------------------------------------------- ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception...

...onfiguration: - 2 Hitachi SATA 120 GB Harddisks (first generation, no NCQ) - Intel P4 3GHz - Tyan Tomcat i875p motherboard, Intel ICH5 disk controler - 1 GB ECC RAM - 2 Intel Gb NICs - 1 Intel 10/100 NIC Error message follows: --------------------------------------------------------------------- ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata1.00: tag 0 cmd 0xb0 Emask 0x1 stat 0x51 err 0x4 (device error) ata1: EH complete ata1.00: exception...

...32, base e1000000, size 23 pci1: <PCI bus> on pcib1 pci1: <Trident model 8500 VGA-compatible display device> (vendor=0x1023, dev=0x8 500) at 0.0 irq 11 isab0: <PCI to ISA bridge (vendor=1106 device=8231)> at device 17.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 8231 ATA100 controller> port 0xd000-0xd00f at device 17.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xd000 ata0: mask=03 ostat0=50 ostat2=00 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 a...