Displaying 18 results from an estimated 18 matches for "apic_io".
Did you mean:
apic_id
2003 Nov 01
1
CPU1 never used despite HTT?
...ERIC kernel. The only differences to
the shipping GENERIC are:
21,22c21,22
< cpu I386_CPU
< cpu I486_CPU
---
> #cpu I386_CPU
> #cpu I486_CPU
64,65c64,65
< #options SMP # Symmetric MultiProcessor Kernel
< #options APIC_IO # Symmetric (APIC) I/O
---
> options SMP # Symmetric MultiProcessor Kernel
> options APIC_IO # Symmetric (APIC) I/O
238a239
> pseudo-device vlan 10 # VLAN support
What's wrong?
Helge
Copyright (c) 1992-2003 The...
2003 Jul 21
2
LH3 SMP hangs for no apparent reason
Hi,
I have been having a fairly serious problem with an HP Netserver LH3
that seems to hang for no apparent reason. This happens when the
machine is under load and it also happens when it is simply idle. When
this "hang" occurs I can no longer SSH to the box. I can ping it and
port scan it and it appears to be "alive" but it won't load web pages or
process mail
2003 Sep 06
0
Fatal Trap 12: page fault while in kernel mode on IBM x340 after Aug25CVS
...0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin
2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
DUMMYNET initialized (011031)
IP packet filtering initialized, divert disabled, rule-based forwarding
enabled, default to deny, loggi...
2003 Aug 13
6
5.1-R-p2 crashes on SMP with AMI RAID and Intel 1000/Pro
...3 not in bitmap of probed irqs 0
sio1: port may not be enabled
ppc0: parallel port not found.
unknown: <PNP0303> can't assign resources (port)
psmcpnp0: irq resource info is missing; assuming irq 12
unknown: <PNP0700> can't assign resources (port)
ppc1: parallel port not found.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimit...
2003 Apr 21
0
Health check
...atures=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,S
EP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2147467264 (2097136K bytes)
config> di sn0
config> di lnc0
config> di ie0
config> di fe0
config> di cs0
config> q
avail memory = 2086445056 (2037544K bytes)
APIC_IO: MP table broken: 8259->APIC entry missing!
Changing APIC ID for IO APIC #0 from 0 to 8 on chip
Programming 35 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 3, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version:...
2003 Apr 14
1
em0: watchdog timeout -- resetting
...Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: 9671MB <WDC AC310100B> [19650/16/63] at ata0-master UDMA33
ad1: 39082MB <Maxtor 54098U8> [79406/16/63] at ata1-master UDMA33
Waiting 15 seconds for SCSI devices to settle
Mounting...
2003 Apr 09
1
Panics on 4.7 system
...;AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0
intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
ata0-slave: ATAPI identify retries exceeded
SMP: AP CPU #1 Launched!
acd0: CDROM <TEAC CD-ROM CD-224E> at ata0-master PIO4
am...
2003 Jul 03
1
SCSI backup error
...(ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ahc2: PCI error Interrupt at seqaddr = 0x2
ahc2: Signaled a Target Abort
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IPsec: Initialized Security Association Processing.
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
sa0 at ahc2 bus 0 target 6 lun 0
sa0: <HP HP35470A T603> Removable Sequential Access SCSI-2...
2003 Apr 23
2
Fw: Anyone please???? SMP & general health check!!
...36,MMX,FXSR,SSE>
> > real memory = 2147467264 (2097136K bytes)
> > config> di sn0
> > config> di lnc0
> > config> di ie0
> > config> di fe0
> > config> di cs0
> > config> q
> > avail memory = 2086445056 (2037544K bytes)
> > APIC_IO: MP table broken: 8259->APIC entry missing!
> > Changing APIC ID for IO APIC #0 from 0 to 8 on chip
> > Programming 35 pins in IOAPIC #0
> > IOAPIC #0 intpin 2 -> irq 0
> > FreeBSD/SMP: Multiprocessor motherboard
> > cpu0 (BSP): apic id: 3, version: 0x00040011,...
2003 Apr 07
1
kmem_malloc crash with 4.8
...RR|ENSELDI|ENSELDO)
CCSCBCTL[0x0]
ahd1: REG0 == 0x3c36, SINDEX = 0x33, DINDEX = 0x0
ahd1: SCBPTR == 0x1ff, SCB_NEXT == 0xff00, SCB_NEXT2 == 0x0
CDB ff 1 0 0 0 0
STACK: 0x8 0x7 0x6 0x5 0x4 0x3 0x2e 0x1
>>>>>>>>>>>>>>>>>
ahd1: Signaled Target Abort
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
pass1 at ahd0 bus 0 target 6 lun 0
pass1: &l...
2003 Aug 07
0
understanding a panic / crash dump
...Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default
to accept, logging limited to 41100 packet
s/entry by default
DUMMYNET initialized (011031)
IPv6 packet filtering initialized, logging limited to...
2003 Jul 27
2
SMP Problems with 4.8-RELEASE
...ns P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
# To make an SMP kernel, the next two are needed
options SMP # Symmetric MultiProcessor Kernel
options APIC_IO # Symmetric (APIC) I/O
# To support HyperThreading, HTT is needed in addition to SMP and APIC_IO
#options HTT # HyperThreading Technology
device isa
device pci
#device agp
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1...
2003 Oct 01
0
AC-97 problem between RELENG_4_8 and RELENG_4
...lds in debug
# output. Adds ~128k to driver.
#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options USER_LDT
#options DDB
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# To support HyperThreading, HTT is needed in addition to SMP and APIC_IO
#options HTT # HyperThreading Technology
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1...
2003 Dec 01
0
No subject
...0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master using UDMA33
ad1: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-slave using UDMA33
ad2: 29314MB <IBM-DTLA-307030> [5...
2003 Jun 04
1
Broken -STABLE kernel build?
...P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the fo...
2003 Aug 22
1
nforce2 usb is broken on -stable
...#Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options USER_LDT
options SHMALL=8192
options CPU_ATHLON_SSE_HACK
options CPU_ENABLE_SSE
options NO_F00F_HACK
# To support HyperThreading, HTT is needed in addition to SMP and APIC_IO
options HTT # HyperThreading Technology
device isa
device eisa
device pci
device apm
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't...
2003 Aug 01
0
gdb coredumps
...SHMALL=16384
options SHMMAX="(SHMMAXPGS*PAGE_SIZE+1)"
options SHMMAXPGS=8192
options SHMMIN=128
options SHMMNI=128
options SHMSEG=96
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the fo...
2003 Apr 10
2
Crash dump in umount
...ETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
#device eisa
device pci
# Floppy drives
#device fdc0 at isa? port IO_FD1 irq 6 drq 2
#device fd0 at fdc0 drive 0
#device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but th...