search for: anteced

Hi All. Yesterday I was installing Centos 5.5 to my web server, and it looks like the main hard drive has gone AWOL. Fedora 12 put the file system into r/o mode. The drive is an Hitachi, still under warranty. There are bad sectors on it, and running the Hitachi DFT tool confirms this. Also I cannot repair the bad sectors. Would this be caused by a faulty I/O chip, or is it safe to say

Hi folks, I have a win2k acting as rsync client (I installed cwrsync) and FreeBSD 5.4 acting as rsync server and I'm having trouble with basic usage. ------------------------------ My /etc/rsyncd.conf: log file = /var/log/rsyncd.log pid file = /var/run/rsyncd.pid lock file = /var/run/rsync.lock [antec_win2k_mike] path = /vol3/antec_win2k_mike uid = nobody gid = nobody read only

Here is what I've ordered for the new system: Case: Antec TX1050B, Mid-Tower Server Case MoBo: Intel D945GCL CPU: Intel Pentium-4 631 RAM: Aeneon 512 Mb 240-pin DDR2 SDRAM DIMM - DDR2 667 Disk: Hitachi 80 Gb SATA 3G Carrier: Vantec MRK-200ST-BK DVD: got one on the shelf I'm going to try Floppy: Sony MPF920-Z-121 My intention is to load CentOS-4 complete and use the

I'm using the same CD's that I've used to install CentOS on my other systems. After the first failure I had the installation verify the install media just in case. It passed. I've tried the default install (used for all previous installs) and the i586 option (after googling). They both fail in the same way. Here is a transcript of what is output to the screen: Running

Hi, I'm planning on moving my Asterisk server to a rackmount. I've read that Asterisk has run into some problems with certain hardware configurations so I thought I'd vet my proposed architecture with the board. Note that I'll be running Asterisk 1.2 on Re Hat 9.0 and I need to support a TDM400 card. Many thanks for your comments. Hugh Motherboard Asus P5GD1-VM - MATX Intel

I install epson11373.exe for EPSON Perfection 2480 PHOTO (http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=41623&prodoid=46048265&infoType=Downloads&platform=Windows) with wine1.3 but I can't use it Code: $ env WINEPREFIX="/home/isaric/.wine" wine C:\\windows\\command\\start.exe /Unix

I'm installing my first Asterisk server. I have a TDM04B card installed in my asterisk server (4x FXO ports). I have 5 Cisco IP phone 7960 working fine on asterisk using SIP. My configuration to receive call is working as expected meaning anyone calling on one of the 4 FXO ports is answer by asterisk and asked to enter the extension of the person to reach and then it is transfer on the

I'm trying to find a way to call voicemail without being prompted for my mailbox number. I was wondering if there was a variable for sip mailbox, or is there a way to define a variable that matches a sip's mailbox. I tried using "exten => 996,1,voicemailMain(${CALLERIDNUM})" but this only works if the mailbox matches the caller id. Any suggestions would be appreciated.

I had my eye on the Tyan dual-Opteron mobos for awhile. I tried to find a posting *anywhere* sharing experiences with these boards under Linux. No such luck. So placing myself under the heading "Where Angles Fear to Tread," I went ahead and built a system anyway. Here's what I've learned. The specs: Tyan Thunder K8SE S2892, BIOS 1.01 2x Opteron 270, 2Ghz Dual-Core, retail

This is getting OT and you are going to end up spending more on redundancy then if you just called Dell and ordered another computer. ----- Original Message ----- From: centos-bounces at centos.org <centos-bounces at centos.org> To: CentOS mailing list <centos at centos.org> Sent: Fri Mar 14 09:31:00 2008 Subject: RE: [CentOS] Recommendations for a ?real RAID" 1 card on Centos

I want to buy a new server to run Asterisk and after looking at prices for the Athlon XP 3000+ it costs the same as an Athlon 64 at the same speed rating. I was wondering if Zaptel/Asterisk will compile/work on an Athlon 64? -- Carlos Chavez Director de Tecnolog?a Telecomunicaciones Abiertas de M?xico S.A. de C.V.

So after toying around with some stuff a few months back I got bogged down and set this project aside for a while. Time to revisit. <BR><BR> Looking around there still is not a good "these cards/motherboards" work list. the HCL is hardly ever updated, and its far more geared towards business use than hobbyist/home use. So bearing all of that in mind I will need the

Is anyone running either the newish Adaptec 5805 or the new LSI (3ware) 9750 sas raid controllers in a production environment with Centos 5.3/5.4? The low price of these cards makes me suspicious, compared to the more expensive pre-merger 3ware cards and considerably more expensive Areca ARC-1680. I've been 'burned' by the low cost of Promise raid cards (just as this group pointed

Hi all,<br> <br> So I am new here (both using Solaris and also posting on this forum) and I need<br> some advice.<br> I have a plan on making a machine set up as a Network Storage Server and I just<br> want some of your recommendations and opinions on how to go about this.<br> <br> I do a lot of video editing of DV files and want to be able to store them

This is my first post here, and i hope it is ok that i posted in this thread. I have been doing a bit of reading on the solaris platforms, and seem to be inclined to try out the open solaris os or solaris 10. My only worry is that my lack of knowledge with the command line may make this difficult regarding trouble shooting. It seems fairly straighforward creating zpools etc, but maybe nexenta is

I have a trio of servers that like to reboot during high disk / network IO operations. They don't appear to panic, as I have kernel.panic = 0 in sysctl.conf. The syslog just shows normal messages, like samba complaining about browse master and then just syslogd starting up. The machines seem to crash when I'm not near the console, usually when I'm trying to pull data off them to

Hi all... I have a new machine for centos 5. amd 6000+, 2 gig and 750GIG drives. Price is quite reasonable... Anyway... centos 5 installs fine, I was running fine then the machine just turned off. I tried to run a video for the last 8 hours on it waiting to happen again and it worked just fine. I then did a continues compile with a batch file and after a few minutes it just turned off... I saw

Hi there, I'm experiencing an echo problem and dammed If I can sort it out. We're running Asterisk on Fedora Core 3 64bit, installed as per http://www.voip-info.org/wiki-Asterisk+Fedora+Core+3. These are the specs of the Machine ? 1 x AMD A64/3500+ CPU: Desktop Athlon64? Retail w/fan SKT 1 x Asus A8N-SLI Deluxe Athlon? 64 S939 NVIDIA nForce(r)4 SLI? PCI Express Req: 24pin ATX 1 x

FWIW: I order a lot of Dells. My boss is cheap. That being said, I *like* Dell, it's a very well designed box. It's been said many times that Dell does not innovate, instead they copy and improve and I firmly agree with the "improve" part - they are a dream to work on. Some things to watch out for with Dell: 1. They typically tack on a shipping charge of $139 Cdn (yes they

Hi all! I'm toying with the idea of spending some Christmas money on a new MB and CPU to upgrade my desktop. Although I've always been partial to AMD chips, I'm tempted this time to find something Intel-ish, I5, quad core, or so. In looking at mommyboards at New Egg and Amazon, I find so many I am unable to make reasonable determinations regarding suitability, so am hoping some of