search for: anlagenanschluss

Hello, can someone on the list confirm, that it is possible to connect a FritzCard to an "Anlagenschluss", when I use the mISDN driver? I have read a number of posting and articles, that this is not possible with the CAPI driver, but found no clear answer about the mISDN driver. Thanks for your help, Ralf -- ___________________________________________________ Play 100s of games for

Hi all ! We have 3 NTBAs which are all going to our existing PBX. Our areacode is 06003 and our DDI enabled number 9141. I want to exchange that PBX with Asterisk, but still struggle to get it working. My CAPI.CONF is currently like this: [general] nationalprefix=0 internationalprefix=00 rxgain=0.800000 txgain=0.800000 [interfaces] context=in-capi msn=60039141 incomingmsn=* controller=1

...nd pick it up on another phone. I don't want this to happen and can't figure out how to disable this on DAHDI or at least the current channel. I tried "facilityenable=no" in chan_dahdi.conf, but this only supresses signalling the on hold status. We are using a german ISDN "Anlagenanschluss" (bri_cpe) whith DDI served by the Deutsche Telekom, connected to a ISDN card which is used with DAHDI. Is there a hidden config flag or something to disable this for DAHDI? Or maybe a channel variable to temporarily disabling this on some channels? THANK YOU! Greetings from Wuppertal Max

Hi, I am using Asterisk on a DSS1 ISDN-BRI with ISDN4Linux (and a Fritz Card PnP). The ISDN-BRI is in PTP-Mode (Point to Point "german: Anlagenanschluss") which is enabled within I4L with "hisaxctrl fcpcipnp0 7 1". Everything works fine except that I can not see the called number/MSN of incoming calls within Asterisk and because of this I can not route incoming calls directly to the correct extension (DID). The number is received...

Hello List, is someone operating a DID /P2P / Anlagenanschluss with more than one HFC-Based ISDN-Card ??? I have now 12 hours of setup-troubles behind me with Colt-Telekom, where we did not get it working with two HFC-based cards. Here the setup: - 2 HFC-ISDN-Cards (the one from Conrad-Electronic) - bri-stuff.0.0.2 (with the asterisk-sources from the downlo...

Try different entry in this parameter. In Italy mobiles start with 3, while public services with 1 and normal user numbers with 0. Using pridialplan=none, every number different from 0 was resulting in termination code 1, normally used for number never seen on the network. Ciao Mauro

Hi list, I am searching for a possibility to do a certain call transfer method which is called "path replacement" in QSIG. But I want to do that in DSS1 (EuroISDN). If my asterisk does a call transfer I want the machine to signalize on dchan that the call path has to be replaced to a direct connect between the caller and the called, i.e. my machine is to hang up after the transfer and

Has anyone a working /etc/asterisk/capi.conf example for Germany or Switzerland using the AVM C4 - ISDN Card. I try to connect asterisk to 3 wires BRI-ISDN (Swisscom). I appreciate your help and it would save me a lot of time, figuring it out by myself. regards, Claudio

hi all, i have a probably very stupid question/problem. for testing purpose i am trying to get asterisk running with two isdn cards. I'd only like to here the demo sound when i call the number - but nothing works. The output of show channels is not showing any channel - should there be 4 channels ? - capi info shows my two cards perfectly. The ISDN Controller's are attached to an PTMP

Hi, after I fixed my problem with the playback() application, I now have the next strange one. When I dial the number of our client, located in another town, I get a connection to the asterisk server, I can talk to my client or listen to his mailbox. If some in the town of this client calls him, he gets the ISDN error "service not available". Out office is connected to he office