search for: ampere

I'm currently trying to install samba 2.0.3 following DIAGNOSIS.txt on Solaris 2.7 When I try "net view \\ampere" ( ampere = samba server ) I got the following : Error 86 ... bad password ( in french : erreur 86 , mauvais mot de passe, contacter votre administrateur reseau...) what can I do ? I believe the error comes from the smb.conf but I tried several changes and none were useful. Than...

...to figure out how many phones can be powered. The Cisco 3560 datasheet says "the 48-port PoE configurations can deliver the necessary power to support 24 ports at 15.4W, 48 ports at 7.7W, or any combination in between" ...370 Watts POE max output. >From a UPS planning site: Volts * Amperes = VA VA * .8 = Watts To convert small units into large units you divide. Amperes = 1000/500mA = .5A VA = 24V * .5A = 12VA Watts = 12VA * .8 = 9.6 Watts 370 Watts maximum output / 9.6 Watts/phone = 38 phones Does this logic hold water or change with line loss? Thank you, JJW __________________...

...<method name="1"> <device name="ipoman" action="Off" switch="volt" port="3"/> <device name="ipoman" action="Off" switch="ampere" port="9"/> <device name="ipoman" action="On" switch="volt" port="3"/> <device name="ipoman" action="On" switch="ampere...

...bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 002 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1...

Hi guys, I've been experiencing a very strange issue with my Digium Card TDM400 as of this week. It has two FXS and two FXO. The FXO modules (both of them) never goes on-hook after hanging up in Asterisk. It had worked perfectly well for over four years. I put an ammeter in series with the line and the card, and immediately after plugging the connector to the card, I got 26mA in the circuit

...? ? ? bInterval ? ? ? ? ? ? ?12 Hub Descriptor: ? bLength ? ? ? ? ? ? ? 9 ? bDescriptorType ? ? ?41 ? nNbrPorts ? ? ? ? ? ? 5 ? wHubCharacteristic 0x000a ? ? No power switching (usb 1.0) ? ? Per-port overcurrent protection ? bPwrOn2PwrGood ? ? ? 10 * 2 milli seconds ? bHubContrCurrent ? ? ?0 milli Ampere ? DeviceRemovable ? ?0x00 ? PortPwrCtrlMask ? ?0xff ?Hub Port Status: ? ?Port 1: 0000.0100 power ? ?Port 2: 0000.0100 power ? ?Port 3: 0000.0100 power ? ?Port 4: 0000.0100 power ? ?Port 5: 0000.0100 power Device Status: ? ? 0x0001 ? Self Powered Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2....

Dear all On my system html() conversion of a `latex()' object fails. Follows a dummy example: > require(Hmisc) > data(Angell) > .object <- cor(Angell[,1:2], use="complete.obs") > tmp <- latex(.object, cdec=c(2,2), title="") > class(tmp) [1] "latex" > html(tmp) /tmp/RtmprfPwzw/file7e72f7a7.tex:9: Warning: Command not found: \tabularnewline

...oller... Now the question to you: Since I do not want to reinvent the wheel, I like to use existing programs where I think, NUT is the perfect solution... The problem is, HOW I have to deliver the data to it or how must I provide it? The "PowerWhatch" module picks only the Voltage and Amperes and Temperature from each of the 11 modules... and maybe it will store them for a while in a 8-16 kByte NV-RAM or something like this... If you have ideas or suggestions, please let me know. Greetings and Nice Day Michelle Konzack Systemadministrator 24V DC Electronic Engineer Ta...

Hi nut-upsdev, I have just got OMRON BX35F. Only object files and usage information is included. Where should I start to help you to get it supported? Any interest in supporting it at all?

...tically large values, especially when we report them with two decimals resolution (10 microAmps). Even the laboratory measuring equipment that is standing right next to me now, doesn't offer this resolution in the range that is common for most UPS'es. I think you meant to write 'Ampere (A)' here and in that case, two decimals (10 milliAmps) resolution is not too unreasonable. Reporting outlet voltage with 10mV resolution is ridiculous. This would require an accuracy of better than 0.004% to have any meaning. This is at least two orders of magnitude better than the accu...

...{ "output.voltage", 0, 0, "Lv", "%05.1f", VOLT, TRUE }, { "output.voltage.nominal", ST_FLAG_RW | ST_FLAG_STRING, 5, "Lv ?", "%05.1f", VOLT, TRUE }, { "output.current", 0, 0, "Lc", "%05.1f", AMPERE, TRUE }, If I copy the old driver back, it works fine ? so I?m guessing I?ve got something wrong with the compile or syntax! Welcome your thoughts ? the ESV22+ was a beast I came across which didn?t work ? I managed to pick up some replacement batteries and it?s now protecting a load of audio and...

...r does anyone know how to change Win98 non-encrypted password from client box ? Here is my smb.conf [global] hosts allow = 192.0.0. workgroup = WORKGROUP security = user domain master = yes local master = yes prefered master = yes os level = 65 wins support = yes domain logons = yes logon path = \\ampere\%U\profile logon drive = z: logon home = \\ampere\%U logon script = users.bat preserve case = yes short preserve case = yes case sensitive = no browseable = yes invalid users = root admin users = admin [netlogon] path = /opt/samba/netlogon writeable = yes browseable = yes [homes] writeable = yes br...

...Config Voltage Item(Global): Report Size, data= [ 0x10 ] 16 Item(Global): Report Count, data= [ 0x01 ] 1 Item(Global): Unit, data= [ 0x21 0xd1 0xf0 0x00 ] 15782177 System: SI Linear, Unit: Centimeter^2*Gram*Seconds^-3*Ampere^-1 Item(Global): Unit Exponent, data= [ 0x07 ] 7 Unit Exponent: 7 Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xfa 0x00 ] 250 Item(Main ): Feature, data= [ 0x02 ] 2...

On Sep 6, 2014, at 4:16 PM, Leslie Rhorer <lrhorer at mygrande.net> wrote: > Oh, hey! That seems to have worked. I'm sure the UPS got plugged into a different port one of the (many) times the server was removed from the relay rack, and it was on a USB 3.0 port. I moved it to a 1.0 port and everything seems to be working just fine. The specifics of the motherboard and its USB

...12 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 8 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0xb7 0xc8 PortPwrCtrlMask 0xa0 0x08 Hub Port Status: Port 1: 0000.0000 Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Port 6: 0000.0100 power Port 7: 0000.0100 power Port 8: 0000.0100 power Bus 002...

On 9/6/2014 12:47 PM, Charles Lepple wrote: > On Sep 6, 2014, at 12:39 PM, Leslie Rhorer <lrhorer at mygrande.net> wrote: > >> I made a number of hardware and software changes, including an upgrade to the latest software versions for that distro (Debian Wheezy), > > Can you be more specific about the changes? Well, I did an automated upgrade (apt-get upgrade), I changed

...Config Voltage Item(Global): Report Size, data= [ 0x10 ] 16 Item(Global): Report Count, data= [ 0x01 ] 1 Item(Global): Unit, data= [ 0x21 0xd1 0xf0 0x00 ] 15782177 System: SI Linear, Unit: Centimeter^2*Gram*Seconds^-3*Ampere^-1 Item(Global): Unit Exponent, data= [ 0x07 ] 7 Unit Exponent: 7 Item(Global): Logical Minimum, data= [ 0x00 ] 0 Item(Global): Logical Maximum, data= [ 0xfa 0x00 ] 250 Item(Main ): Feature, data= [ 0x02 ] 2...

...12 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 8 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x60 PortPwrCtrlMask 0x17 0x15 Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Port 6: 0000.0100 power Port 7: 0000.0100 power Port 8: 0000.0100 power Bus 002 Devi...

2006/1/27, Peter Selinger <selinger@mathstat.dal.ca>: > > ... > battery.mfr.date, which is probably the more accurate interpretation. > > I think the naming should be changed to propose both: - battery.date.mfr: Battery manufacturing date - battery.date.change: Battery change date Any comments? Arnaud -------------- next part -------------- An HTML attachment was scrubbed...

...e", 0, 0, "Lv", "%05.1f", VOLT, TRUE }, > > { "output.voltage.nominal", ST_FLAG_RW | ST_FLAG_STRING, 5, "Lv ?", > "%05.1f", VOLT, TRUE }, > > { "output.current", 0, 0, "Lc", "%05.1f", AMPERE, TRUE }, > > > > If I copy the old driver back, it works fine ? so I?m guessing I?ve got > something wrong with the compile or syntax! The .h file looks good, as far as I can tell. > Welcome your thoughts ? the ESV22+ was a beast I came across which didn?t > work ? I managed...